Table of Contents
Advertisement
Page
26
Document Number: 0072
Rev. 09
Particular efforts should be made to support the hose where it exits the rear of the connector,
particularly if the hose is to be routed immediately in an orientation contradictory to the connector
(e.g. immediate U shape routing – see Figures below)
Figure 22-Immediate U shape routing
Figure 23-Hose kink due to acute angle and weight application
Siemens recommends the use of "formers" to avoid exceeding the MBR of the hose when exiting the
connector or passing over acute angled surfaces (through or around structures).
CONTROLLED COPY
Advertisement
Table of Contents
