Related Manuals for Honeywell Multi-Bay Battery Charger
Summary of Contents for Honeywell Multi-Bay Battery Charger
- Page 1 Multi-Bay Battery Charger For RP2, RP4 Series Mobile Printer Batteries Instructions RP234MBC-EN-IN Rev D 11/21...
-
Page 2: Connect Power
Introduction Honeywell’s Multi-Bay Battery Charger can fully charge up to four lithium-ion batteries in less than eight hours. An RP2 battery typically takes 4 hours to fully charge, and an RP4 battery takes 7 hours. Connect Power Use only a UL listed power supply that has been qualified by Honeywell with and output rated at 12 VDC. -
Page 3: Charge Battery
Connect the right angle power adapter to the Multi-Bay Battery Charger. Then plug the power supply into an AC power outlet. Make sure the AC power outlet voltage is the same as the power supply. Charge Battery Operational temperature for charging the battery is 32° to 104°F (0°... - Page 4 Place a battery into a cradle to charge with the battery con- tacts facing the contacts on the charger. When a battery is inserted, the solid red LED appears. If the red LED does not appear or is flashing, check to make sure the battery pack is seated completely in the charger with the battery contacts facing the contacts on the charger.
-
Page 5: About The Battery
Replace it after the battery is unable to hold an adequate charge. • If you are not sure if the battery or charger is working properly, send it to Honeywell International Inc. or an authorized service center for inspection. Refer to Technical Assistance... - Page 6 Unplug the Multi-Bay Battery Charger from the power supply before cleaning. Clean the housing of the Multi-Bay Battery Charger with a soft cloth or tissue dampened with water (or a mild detergent- water solution). If a detergent solution is used, rinse with a clean tissue dampened with water only.
-
Page 7: Customer Support
Disclaimer Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made. The information in this publication does not represent a commitment on the part of HII. -
Page 8: Limited Warranty
Product Service and Repair Honeywell International Inc. provides service for all of its products through service centers throughout the world. Go to sps.honeywell.com and select Support to find a service center near you or to get a Return Material Authorization number (RMA #) before returning a product.