Table of Contents
Advertisement
v Method 1: Wood surface — A minimum wood thickness—38 mm (1.5 in.) by 28
v Method 2: Drywall walls — Drywall over wood studs is acceptable.
Mounting to a solid concrete or brick wall — Mounts on a flat smooth surface.
Selecting the location
Plan the mounting location thoroughly. Locations such as walkway areas, hallways,
and crowded areas are not recommended. Mount the unit to a flat, sturdy,
structurally sound column or wall surface.
The best mounting surface is a standard countertop, cabinet, table, or other
structure that is minimally the width and length of the unit. This recommendation
reduces the risk that someone may accidentally walk into and damage the device.
Local laws governing the safety of individuals might require this type of
consideration.
Determining the mounting height of wall mount plate
For users in a standing position, the typical height is approximately 122 cm (48 in.)
from the floor to the center of the touch display. The height used should be
appropriate and comfortable for a large portion of the users. Additionally, you should
adjust the display's initial angle of tilt to provide adequate and comfortable viewing
by the users for the tasks that they perform.
Figure 13. IBM 4836 mounting height
18
Anyplace Kiosk 4836
cm (11 in.)— of high, construction–grade wood is recommended.
Note: This method provides the most reliable attachment of the unit with little
risk that the unit will come loose or require ongoing maintenance.
Advertisement
Table of Contents
