Language Selection - Sony STR-DA5600ES Operating Instructions Manual
Multi channel av receiver
Hide thumbs
Also See for STR-DA5600ES:
- Mode d'emploi (190 pages) ,
- Integration manual (9 pages) ,
- Features (2 pages)
Table of Contents
Advertisement
x HDMI AUTO
The time gap between audio output and visual
display for the monitor connected via an
HDMI connection will be adjusted
automatically based on the information for the
TV. This feature is available only when the
monitor supports the A/V Sync function.
x 0 ms – 1200 ms
You can adjust the delay from 0 ms to
1200 ms* in 10 ms steps.
* The maximum delay may be limited to the lower
value, depending on the audio stream.
Notes
• This function is useful when you use a large LCD
or plasma monitor or a projector.
• This function does not work in the following cases.
– The multi-channel input is selected.
– "2ch Analog Direct" is being used.
Dual Mono (Digital broadcast
language selection)
Lets you select the language you want when
you listen to the dual audio of a digital
broadcast. This feature only functions for
Dolby Digital sources.
x MAIN/SUB
Sound of the main language will be output
through the front left speaker, and sound of the
sub language will be output through the front
right speaker simultaneously.
x MAIN
Sound of the main language will be output.
x SUB
Sound of the sub language will be output.
Decode Priority (Digital audio
input decoding priority)
Lets you specify the input mode for the digital
signal input to the DIGITAL IN jacks or
HDMI IN jacks.
126
GB
x PCM
When signals from the DIGITAL IN jack are
selected, PCM signals are given priority (to
prevent interruption when playback starts).
However, when other signals are input, there
may be no sound, depending on the format. In
this case, set this item to "AUTO."
When signals from the HDMI IN jack are
selected, only PCM signals are output from the
connected player. When signals in any other
format are received, set this item to "AUTO."
x AUTO
Automatically switches the input mode
between Dolby Digital, DTS, or PCM.
Note
Even when "Decode Priority" is set to "PCM," the
sound may be interrupted at the very beginning of
the first track due to signals on the CD being played
back.
Night Mode
Lets you to retain a theater-like environment at
low volume levels. This function can be used
with other sound fields. When watching a
movie late at night, you will be able to hear the
dialog clearly even at a low volume level.
x OFF
x ON
Hide quick links:
Advertisement
Table of Contents
