Page 1 Service Manual describes replacement parts for the green product. When repairing this green product, use the part(s) described in this manual and lead-free solder (*2). For (*1) and (*2), refer to GREEN PRODUCT PROCUREMENT LEAD-FREE SOLDER. © TOSHIBA CORPORATION file://C:\Program Files\zeus\js\!!fcover.html 16.05.2015...
Page 2: Service Mode
ADJUSTMENT [LCD Color Television] ASIA_EU Стр. 1 из 21 ADJUSTMENT Service Mode Entering to Service Mode 1. Set VOLUME to minimum and press button once on remote control. ↓ ↓ ↓ ↓ 2. Press button again and hold button down. ↓...
Page 3 ADJUSTMENT [LCD Color Television] ASIA_EU Стр. 2 из 21 Displaying the Adjustment Menu Press MENU button on TV. Service Mode Press ↑ ↑ ↑ ↑ ↓ ↓ ↓ ↓ Press Adjustment Mode Key Function in the Service Mode The following key entry during display of adjustment menu provides special functions. CAUTION: Never try to perform initialization unless you have changed the memory IC.
Page 4 ADJUSTMENT [LCD Color Television] ASIA_EU Стр. 3 из 21 Test signal selection Selection of the adjustment items (on TV or remote control) Change of the data value Volume +/- (on TV or remote control) Adjustment menu mode ON/OFF MENU button (on TV) Initialization of the memory (QA02) CALL + CH button on TV...
Page 5 ADJUSTMENT [LCD Color Television] ASIA_EU Стр. 4 из 21 Item Name of adjustment RCUT R CUT OFF GCUT G CUT OFF BCUT B CUT OFF RDRV R DRIVE GDRV G DRIVE BDRV B DRIVE BRTC BRIGHTNESS CENTER COLC COLOR CENTER UVTT BASE BAND TINT CNTX...
Page 6 ADJUSTMENT [LCD Color Television] ASIA_EU Стр. 5 из 21 FPLG2 Channel LOGO Vector Clip SW (SD) FPLG3 Channel LOGO Vector Clip SW (HD) Factory preset data will be loaded after setting Model ID data. (Refer to Initialization of Memory Data of QA02 and setting data of signal board.) Adjusting the Data Pressing of VOLUME +/- button will change the value of data in the range from 00H to...
Page 7 ADJUSTMENT [LCD Color Television] ASIA_EU Стр. 6 из 21 Setting Panel Option Data Panel option data is subject to OP4 and OP5. Enter to service mode and select menu of OPT4 or OPT5 by pressing P or P during display of adjustment menu. After selecting OPT4 or OPT5, press + or - to set OPT4 or OPT5 value as table below.
Page 8 ADJUSTMENT [LCD Color Television] ASIA_EU Стр. 7 из 21 Ex. OPT5 value 0x06 indicates that panel size is 37. OPT5 (bit7) (bit6) (bit5) (bit4) (bit3) (bit2) (bit1) (bit0) Size Convert from Bit (Binary) to Hex The table for converting from bit (D7-D0) to hex (0x**). BIT (Binary) High nibble Low nibble...
Page 9: Exit From Service Mode
ADJUSTMENT [LCD Color Television] ASIA_EU Стр. 8 из 21 E.g. If Bit D7-0 = 0101 1010, Hex data is 0x5A. Exit from Service Mode Pressing POWER button to turn off the TV once. Initialization of Memory Data of QA02 and Setting Data of Signal Unit After replacing QA02 or signal board, the following initialization is required.
Page 10 9) Check the picture carefully. If necessary, adjust any adjustment item above. Perform "Auto tune" on the owner's manual. MODEL ID (HEX) Model name Panel vendor 0x01 40XF350P/351P SAMSUNG 0x02 46XF350P/351P SAMSUNG 0x03 40XF355D/356D SAMSUNG 0x04 46XF355D/356D SAMSUNG 0x05 0x06 0x07 0x08 0x09 0x10 0x11...
Page 11 ADJUSTMENT [LCD Color Television] ASIA_EU Стр. 10 из 21 0x21 0x22 0x23 0x24 0x25 0x26 0x27 0x28 0x29 0x30 0x31 0x32 0x33 Initializing Data setting flowchart after replacing the Signal Unit file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa1.009\40X... 16.05.2015...
Page 12 ADJUSTMENT [LCD Color Television] ASIA_EU Стр. 11 из 21 Test Signal Selection file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa1.009\40X... 16.05.2015...
Page 13: Self-Diagnostic Function
ADJUSTMENT [LCD Color Television] ASIA_EU Стр. 12 из 21 Every pressing of button on the remote control changes the built-in test patterns on screen as described below in Service Mode. Picture Signal Red raster Green raster Blue raster All Black All White Self Diagnostic Function 1.
Page 14 ADJUSTMENT [LCD Color Television] ASIA_EU Стр. 13 из 21 (1) Firmware : Version information of microprocessor Series name (AAAA) and market area (BB) and software program version (0000) (2) Time : Total hour of turn the TV on. (Unit : H) (3) BL_STATUS : Counter for saving BackLight on error.
Page 15 ADJUSTMENT [LCD Color Television] ASIA_EU Стр. 14 из 21 (SCART (FULL)) (Component/Composite/S) HDMI1 HDMI2 HDMI3 DTV (Digital Only) Version Check Mode 1. Press "9" button twice on remote control during display of adjustment menu in the service mode. The version of main MPU will be checked. 2.
Page 16 EDID data check item. Display channel numbers depend on HDMI input numbers. OK : EDID data is enable. NG : EDID data is disable. (6) SW Ver Version information of DB software as Toshiba release. (Only digital model.) (7) MW Ver file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa1.009\40X... 16.05.2015...
Page 17 ADJUSTMENT [LCD Color Television] ASIA_EU Стр. 16 из 21 Left side is Application and UI version information of DB software. (Only digital model.) Right side is Firmware (Driver) version information of DB software. (Only digital model.) (8) A/D Adjust A/D adjustment item. --MAIN : It's enable only in double Window model.
Page 18 ADJUSTMENT [LCD Color Television] ASIA_EU Стр. 17 из 21 1. Press "9" button thrice on remote control during display of adjustment menu in the service mode. The status of this model will be checked. 2. During Status Check, the following displays are shown. * Status check display and Item are subject to the models.
Page 19 ADJUSTMENT [LCD Color Television] ASIA_EU Стр. 18 из 21 (7) SCREEN SIZE : Display the screen size as follows. Exact Scan Wide Super Live 2 Cinema 2 Super Live 1 Cinema 1 Subtitle 14:9 Note: Exact Scan is shown only for 1080p panel model with video input mode except pc. (8) OTHER STATUS : Other status information : Display three numbers of 2 byte data.
Page 20 ADJUSTMENT [LCD Color Television] ASIA_EU Стр. 19 из 21 (Video/TV) D3 (bit3) User remote control operation Disable Enable (Service mode and Supere User mode may possible to setting only) D2 (bit2) Disable SET UP MENU except Disable Enable language. (Display the language only) (tuning SETUP MENU) D1 (bit1) Disable SETUP MENU...
Page 21: Led Indication
ADJUSTMENT [LCD Color Television] ASIA_EU Стр. 20 из 21 OPT7 FUNCTION DESCRIPTION 0 (Normal) D7 (bit7) Enable mode that speaker volume will be set Enable Disable in forced when turn ON the main power D6 (bit6) ~ Forced speaker volume 0 ~ 100 [decimal] (Normal: 0) D0 (bit0) Value above 100 is no effect.
Page 22 ADJUSTMENT [LCD Color Television] ASIA_EU Стр. 21 из 21 and turn ON the TV. 2 Green is OFF; Abnormal operation of Turn OFF the TV and unplug Red blinks continuously at 1- BUS line. the power cord. second intervals. Plug the power cord in again and turn ON the TV.
Page 23: Function And Operation
Стр. 1 из 1 FUNCTION AND OPERATION The Remote Control Simple at-a-glance reference of your remote control. file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.537\40X... 16.05.2015...
Page 24: Controls And Input Connections
Стр. 1 из 2 FUNCTION AND OPERATION Controls and Input Connections A wide variety of external equipment can be connected to the input sockets on the side of the television. Whilst all the necessary adjustments and controls for the television are made using the remote control, the buttons on the television may be used for some functions.
Page 25 Стр. 2 из 2 Using the Controls and Connections file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa1.243\40X... 16.05.2015...
Page 26 Стр. 1 из 2 FUNCTION AND OPERATION Tuning Digital Television for the First Time Before switching on the television put your decoder and media recorder to Standby if they are connected and ensure the aerial is connected. To set up the television use the buttons on the remote control. file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.810\40X...
Page 27 Стр. 2 из 2 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.810\40X... 16.05.2015...
Page 28: Digital Auto Tuning
Стр. 1 из 3 FUNCTION AND OPERATION Digital Auto Tuning Note: As new services are broadcast it will be necessary to re-tune the television in order to view them. Auto Tuning file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.822\40X... 16.05.2015...
Page 29 Стр. 2 из 3 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.822\40X... 16.05.2015...
Page 30 Стр. 3 из 3 Analogue Switch-Off file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.822\40X... 16.05.2015...
Page 31: Digital Programme Sorting, Manual Tuning
Стр. 1 из 3 FUNCTION AND OPERATION Digital Programme Sorting, Manual Tuning Note: When the television is switched off the mode being viewed at the time will automatically be selected when the television is switched back on. Programme Sorting file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.147\40X... 16.05.2015...
Page 32 Стр. 2 из 3 Manual Tuning file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.147\40X... 16.05.2015...
Page 33 Стр. 3 из 3 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.147\40X... 16.05.2015...
Page 34 Стр. 1 из 2 FUNCTION AND OPERATION Tuning Analogue Mode for the First Time The Quick Setup feature will tune all analogue channels currently available in the area. To put the television into ATV mode press the A/D button. file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.958\40X... 16.05.2015...
Page 35 Стр. 2 из 2 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.958\40X... 16.05.2015...
Page 36 Стр. 1 из 4 FUNCTION AND OPERATION Analogue Manual Tune The television can be tuned-in manually using Manual tuning. For example: if the television cannot be connected to a media recorder/decoder with a SCART lead or to tune-in a station on another System.
Page 37 Стр. 2 из 4 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.442\40X... 16.05.2015...
Page 38 Стр. 3 из 4 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.442\40X... 16.05.2015...
Page 39 Стр. 4 из 4 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.442\40X... 16.05.2015...
Page 40 Стр. 1 из 1 FUNCTION AND OPERATION Auto Tune Using Auto Tuning file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.201\40X... 16.05.2015...
Page 41: Safety Instruction
Handling the LCD Module Стр. 1 из 4 SAFETY INSTRUCTION Handling the LCD Module Safety Precaution In the event that the screen is damaged or the liquid crystal (fluid) leaks, do not breathe in or drink this fluid. Also, never touch this fluid. Such actions could cause toxicity or skin irritation. If this fluid should enter the mouth, rinse the mouth thoroughly with water.
Page 42 Handling the LCD Module Стр. 2 из 4 3. If the panel surface becomes soiled, wipe with cotton or a soft cloth. If this does not remove the soiling, breathe on the surface and then wipe again. If the panel surface is extremely solied, use a CRT cleaner as a cleaner. Wipe off the panel surface by drop the cleaner on the cloth.
Page 43 Handling the LCD Module Стр. 3 из 4 6. CMOS-LSI circuitry is used in the LCD module, so avoid damage due to static electricity. When handling the module, use a wrist ground or anchor ground. 7. Do not expose the LCD module to direct sunlight or strong ultraviolet rays for an extended period of time.
Page 44 Handling the LCD Module Стр. 4 из 4 10. When transporting the LCD module, do not use packing containing epoxy resin (amine) or silicon resin (alcohol or oxim). The gas generated by these materials can cause loss of polarity. file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.833\40X... 16.05.2015...
Page 45 Стр. 1 из 2 CAUTION FOR REMOVING HDMI CONNECTOR When removing the SIGNAL unit, pay attention to disconnect the connector LVDS cable connector which has the lock claws. The lower part clearance between the lock claw and metal chassis is too narrow. To avoid any possible damages, follow the procedure below.
Page 46 Стр. 2 из 2 Procedure 2 While releasing the lower part lock claw with flat bed screwdriver and the upper lock claw with finger, pull out the connector. file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.595\40X... 16.05.2015...
Page 47: Panel Identification
Стр. 1 из 1 PANEL IDENTIFICATION Panel Identification If the several panels are alternatively used in the same model without amending the model name, the identification marking will be shown at the last digit of the set serial number on the specification label on the back cover.
Page 48 U02A LOW-B U03C U01A POWER U03A AV TERM U06A U04A U05A FRONT HDMI SIGNAL DIGITAL U03B U03D ILLUMINATION...
Page 49: Safety Precaution
Стр. 1 из 4 SAFETY INSTRUCTION WARNING: BEFORE SERVICING THIS CHASSIS, READ THE "SAFETY PRECAUTION" AND "PRODUCT SAFETY NOTICE" INSTRUCTIONS BELOW. Safety Precaution WARNING: SERVICING SHOULD NOT BE ATTEMPTED BY ANYONE UNFAMILIAR WITH THE NECESSARY PRECAUTIONS ON THIS RECEIVER. THE FOLLOWING ARE THE NECESSARY PRECAUTIONS TO BE OBSERVED BEFORE SERVICING THIS CHASSIS.
Page 50 Стр. 2 из 4 inflammability, voltage resistance, etc. therefore, use only replacement parts that have these same characteristics. Use only the specified parts when the mark is indicated in the circuit diagram or parts list. 7. Parts mounting and routing dressing of wirings should be the same as that used originally.
Page 51 Стр. 3 из 4 Resistance values in orms ( ). V: Voltmeter or oscilloscope (r.m.s. or peak reading) Input resistance : Input capacitance : 200 pF Frequency range : 15 Hz to 1 MHz and d.c. respectively Note: Appropriate measures should be taken to obtain the correct value in case of non sinusoidal waveforms.
Page 52: Product Safety Notice
Стр. 4 из 4 Product Safety Notice Many electrical and mechanical parts in this chassis have special safety-related characteristics. These characteristics are often passed unnoticed by a visual inspection and the protection afforded by them cannot necessarily be obtained by using replacement components rated for higher voltage, wattage, etc.
Page 53: Specification
Стр. 1 из 2 SPECIFICATION file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.590\40X... 16.05.2015...
Page 54 Стр. 2 из 2 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.590\40X... 16.05.2015...
Page 71 P212B Digital BOARD Audio OUT CVBS CVBS OUT IC302 Audio Amp ITU-R656 P200B PJ400 Digital VIDEO OUT DVB-CI x 1 PJ212 IC801 H801 UART IC301 Serial port COFDM Tuner Audio DAC for debug Demod PJ142 IF Amp SPDIF IC100 Uart0 IC401 CIMax-SP2L IC221...
Page 72: Schematic Diagram
Стр. 1 из 2 SCHEMATIC DIAGRAM Precaution WARNING: BEFORE SERVICING THIS CHASSIS, READ THE "X-RAY RADIATION PRECAUTION" FOR DIRECT VIEW CTV ONLY, "SAFETY PRECAUTION" AND "PRODUCT SAFETY NOTICE" OF THIS MANUAL. CAUTION: The international hazard symbols " " in the schematic diagram and the parts list designate components which have special characteristics important for safety and should be replaced only with types identical to those in the original circuit or specified in the parts list.
Page 73 Стр. 2 из 2 = Electrolytic capacitor = Mylar capacitor 3. The parts indicated with " " have special characteristics, and should be replaced with identical parts only. 4. Voltages read with DIGITAL MULTI-METER from point indicated to chassis ground, using a color bar signal with all controls at normal, line voltage at nominal AC volts.
Page 167 Стр. 1 из 2 CABINET Stand Exploded View A425 A426 A427 A428 A429 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.636\40X... 16.05.2015...
Page 168 Стр. 2 из 2 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.636\40X... 16.05.2015...
Page 169 Стр. 1 из 12 PARTS LIST All Block Block : Loading ... Block Location Parts No. Description U01A POWER (PE0282) U01A 75009052 PWU, POWER, PE0282H1 U01A POWER (PE0282) C801 76503507 CAPACITOR, PLASTIC FILM, AC275V 0.22UF K U01A POWER (PE0282) C802 76503507 CAPACITOR, PLASTIC FILM, AC275V 0.22UF K U01A POWER (PE0282) C803...
Page 170 Стр. 2 из 12 U01A POWER (PE0282) C8829 76105331 CAPACITOR, CERAMIC CHIP, 50V CH 330PF J U01A POWER (PE0282) C8843 76092883 CAPACITOR, CERAMIC CHIP, 50V B 0.1UF K U01A POWER (PE0282) D801 75001869 VARISTOR, V1=470V 2500A/2 U01A POWER (PE0282) D810 23357712 DIODE, D5SB60, 4009 F05 U01A POWER (PE0282) D811...
Page 171 Стр. 3 из 12 U01A POWER (PE0282) L842 23103304 FERRITE CHOKE, TEM2011AA U01A POWER (PE0282) L860 23103320 COIL, CHOKE, TEM2011 U01A POWER (PE0282) L861 23103320 COIL, CHOKE, TEM2011 U01A POWER (PE0282) L870 23248489 COIL, CHOKE, TLN3639AH U01A POWER (PE0282) L871 23103320 COIL, CHOKE, TEM2011 U01A POWER (PE0282) L872...
Page 172 Стр. 4 из 12 U01A POWER (PE0282) R868 76552151 RESISTOR, OXIDE METAL FILM, 1/2W 150 OHM J U01A POWER (PE0282) R869 76553470 RESISTOR, OXIDE METAL FILM, 1W 47 OHM J U01A POWER (PE0282) R871 76011103 RESISTOR, CHIP, 1/20W 10K OHM J U01A POWER (PE0282) R872 76871152 RESISTOR, CHIP, 1/8W 1.5K OHM J...
Page 173 Стр. 5 из 12 U02A LOW_B (PE0428) CE700 76073181 CAPACITOR, ELECTROLYTIC, 35V 56UF M U02A LOW_B (PE0428) CE730 76073080 CAPACITOR, ELECTROLYTIC, 50V 0.47UF M U02A LOW_B (PE0428) CE731 76073089 CAPACITOR, ELECTROLYTIC, 50V 47UF M U02A LOW_B (PE0428) CE750 76092616 CAPACITOR, CERAMIC CHIP, 16V B 0.33UF K U02A LOW_B (PE0428) CE751 76073150 CAPACITOR, ELECTROLYTIC, 16V 56UF M...
Page 174 Стр. 6 из 12 U02A LOW_B (PE0428) PJ50B 23367068 PLUG, 8P 2.5MM G, JST-EH B8B-EH-F1-TV4 U02A LOW_B (PE0428) QE05 23205330 TRANSISTOR, RN1403(F) U02A LOW_B (PE0428) QE100 23205443 TRANSISTOR, 2SA1162-Y(F) U02A LOW_B (PE0428) QE101 23205446 TRANSISTOR, 2SC2412K, Q T146 U02A LOW_B (PE0428) QE102 23205446 TRANSISTOR, 2SC2412K, Q T146 U02A LOW_B (PE0428)
Page 175 Стр. 7 из 12 U02A LOW_B (PE0428) RE150 75006064 RESISTOR, CR1/16 223DV U02A LOW_B (PE0428) RE151 76011221 RESISTOR, CHIP, 1/20W 220 OHM J U02A LOW_B (PE0428) RE152 75006058 RESISTOR, CR1/16 562DV U02A LOW_B (PE0428) RE153 76000445 CHIP JUMPER, 1608TYPE U02A LOW_B (PE0428) RE154 76011102 RESISTOR, CHIP, 1/20W 1K OHM J U02A LOW_B (PE0428)
Page 176 Стр. 8 из 12 U02A LOW_B (PE0428) RE803 76011392 RESISTOR, CHIP, 1/20W 3.9K OHM J U02A LOW_B (PE0428) RE804 76011471 RESISTOR, CHIP, 1/20W 470 OHM J U02A LOW_B (PE0428) RE805 76011220 RESISTOR, CHIP, 1/20W 22 OHM J U02A LOW_B (PE0428) RE864 76011472 RESISTOR, CHIP, 1/20W 4.7K OHM J U02A LOW_B (PE0428)
Page 177 Стр. 9 из 12 U03A AV_TERM (PE0406) C635 76109473 CAPACITOR, CERAMIC CHIP, 25V B 0.047UF K U03A AV_TERM (PE0406) C636 76667100 CAPACITOR, ELECTROLYTIC, 25V 10UF M U03A AV_TERM (PE0406) C640 76073073 CAPACITOR, ELECTROLYTIC, 35V 2200UF M U03A AV_TERM (PE0406) C641 76073073 CAPACITOR, ELECTROLYTIC, 35V 2200UF M U03A AV_TERM (PE0406) C642...
Page 178 Стр. 10 из 12 U03A AV_TERM (PE0406) CG02 76109152 CAPACITOR, CERAMIC CHIP, 50V B 1500PF K U03A AV_TERM (PE0406) CG03 76109471 CAPACITOR, CERAMIC CHIP, 50V B 470PF K U03A AV_TERM (PE0406) CG04 76109221 CAPACITOR, CERAMIC CHIP, 50V B 220PF K U03A AV_TERM (PE0406) CG05 76092730 CAPACITOR, CERAMIC CHIP, 16V B 0.1UF K...
Page 179 Стр. 11 из 12 U03A AV_TERM (PE0406) CK20 76100104 CAPACITOR, CERAMIC CHIP, 25V F 0.1UF Z U03A AV_TERM (PE0406) CK21 76092616 CAPACITOR, CERAMIC CHIP, 16V B 0.33UF K U03A AV_TERM (PE0406) CK22 76100104 CAPACITOR, CERAMIC CHIP, 25V F 0.1UF Z U03A AV_TERM (PE0406) CK23 76100104 CAPACITOR, CERAMIC CHIP, 25V F 0.1UF Z...
Page 180 Стр. 12 из 12 U03A AV_TERM (PE0406) CV181 76092859 CAPACITOR, CERAMIC CHIP, 10V B 1UF K U03A AV_TERM (PE0406) CV182 76092859 CAPACITOR, CERAMIC CHIP, 10V B 1UF K U03A AV_TERM (PE0406) CV183 76092859 CAPACITOR, CERAMIC CHIP, 10V B 1UF K U03A AV_TERM (PE0406) CV184 76092859 CAPACITOR, CERAMIC CHIP, 10V B 1UF K...
Page 181: Parts List
Стр. 1 из 2 PARTS LIST Precaution WARNING: BEFORE SERVICING THIS CHASSIS, READ THE "X-RAY RADIATION PRECAUTION" FOR DIRECT VIEW CTV ONLY, "SAFETY PRECAUTION" AND "PRODUCT SAFETY NOTICE" OF THIS MANUAL. CAUTION: The international hazard symbols " " in the schematic diagram and the parts list designate components which have special characteristics important for safety and should be replaced only with types identical to those in the original circuit or specified in the parts list.
Page 182 Стр. 2 из 2 : Metal Film : Fusible Resistor All CD and PF capacitors are ±5 %, 50 V and all resistor, ±5 %, 1/6 W unless otherwise noted. file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa1.951\40X... 16.05.2015...

Toshiba 40XF355D Service Manual

Quick Links

Related Manuals for Toshiba 40XF355D

Summary of Contents for Toshiba 40XF355D

Table of Contents