Page 1: User Guide
User Guide Personal Computer V G C - LV s e r i e s / V G C - L N s e r i e s...
Page 2: Table Of Contents
Contents Before Use ...6 Notice ...7 Documentation ...8 Ergonomic Considerations ...11 Getting Started ...13 Locating Controls and Ports...14 About the Indicator Lights ...20 Setting Up Your Computer ...21 Shutting Down Your Computer Safely ...37 Using Your VAIO Computer ...38 Using the Keyboard ...39 Using the Touch Pad ...43 Using the Mouse ...44 Using the Built-in MOTION EYE Camera...47...
Page 3 Using Wireless LAN (WLAN) ...88 Using the Bluetooth Function ...95 Using Peripheral Devices ...101 Connecting External Speakers ...102 Connecting a Universal Serial Bus (USB) Device...104 Connecting a Printer ...106 Connecting an i.LINK Device ...107 Connecting to a Network (LAN) ...109 Customizing Your VAIO Computer ...111 Setting the Password ...112 Setting Up Your Computer with VAIO Control Center...117...
Page 4 Precautions ...135 Handling the LCD Screen ...136 Using the Power Source ...137 Handling Your Computer ...138 Handling the Built-in MOTION EYE Camera...141 Handling Floppy Disks ...142 Handling Discs ...143 Using Headphones ...145 Handling the Memory Stick ...146 Handling the Hard Disk ...147 Updating Your Computer ...148 Troubleshooting ...149 Computer ...150...
Page 5 Keyboard...178 Floppy Disks ...179 Audio/Video...180 HDMI ...183 Memory Stick ...185 Peripherals ...186 Support Options ...187 Sony Support Information ...188 e-Support ...189 Trademarks ...191...
Page 6: Before Use
Before Use ® Congratulations on your purchase of this Sony VAIO computer, and welcome to the on-screen User Guide. Sony has combined leading-edge technology in audio, video, computing, and communications to provide state-of-the-art personal computing experience. External views illustrated in this manual may look slightly different from those of your computer.
Page 7: Notice
In the manual, the ™ or ® marks are not specified. Sony Corporation reserves the right to make any modification to this manual or the information contained herein at any time without notice. The software described herein is governed by the terms of a separate user license agreement.
Page 8: Documentation
❑ Troubleshooting and Recovery Guide — Contains solutions to problems other than those you encounter during normal operation. ❑ Regulations, Guarantee, EULA and Service Support — Contains Sony guarantee conditions, safety / regulations, modem regulations, wireless LAN regulations, wireless WAN regulations, Bluetooth regulations, end user software license agreement, and Sony support services information.
Page 9 ❑ Specifications — The online specifications describe the hardware and software configurations of your VAIO computer. To view the online specifications: Connect to the Internet. Go to the Sony online support web site at http://www.vaio-link.com. ✍ You may have a separate disc that includes documentation for the bundled accessories.
Page 10: Windows Help And Support
Before Use Windows Help and Support Windows Help and Support is a comprehensive resource for practical advice, tutorials, and demonstrations to help you learn to use your computer. Use the search feature, index, or table of contents to view all Windows Help resources, including those on the Internet. To access Windows Help and Support, click Start and Help and Support.
Page 11: Ergonomic Considerations
Ergonomic Considerations Whenever possible, you should attempt to take account of the following ergonomic considerations: ❑ Position of your computer – Place the display directly in front of you (1). Keep your forearms horizontal (2), with your wrists in a neutral, comfortable position (3) while using the keyboard, pointing device, or external mouse. Let your upper arms hang naturally at your sides.
Page 12 ❑ Viewing angle of the display – Use the display's tilting feature to find the best position. You can reduce eye strain and muscle fatigue by adjusting the tilt of the display to the proper position. Adjust the brightness level of the display as well. While adjusting the viewing angle, do not exert excessive pressure on your computer, especially on the center of the speaker grill, to eliminate a risk of mechanical damage.
Page 13: Getting Started
Getting Started Getting Started This section describes how to get started using your VAIO computer. ❑ Locating Controls and Ports (page 14) ❑ About the Indicator Lights (page 20) ❑ Setting Up Your Computer (page 21) ❑ Shutting Down Your Computer Safely (page 37)
Page 14: Locating Controls And Ports
Built-in MOTION EYE camera (page 47) Power indicator (page 20) Remote sensor Point the supplied remote commander to this sensor for operations. SONY logo lamp (page 117) LCD screen (page 136) HDMI SELECT indicator (page 20) WIRELESS indicator (page 20)
Page 15 Back Power button DISPLAY OFF button Press this button to turn off the LCD backlight. While the HDMI input is selected (page 70), pressing this button also turns off the volume. Capture angle adjuster (page 47) Back panel cover Remove the back panel cover to access the ports and jacks behind it (page 21).
Page 16 VGC-LV series models The area around the air exhaust vent (1) becomes hot while your computer is on. Be sure to wait until the computer cools down before you touch it. Air exhaust vent (page 139) HARD DISK DRIVE ACCESS BAY cover Memory module compartment cover (page 124) AC In port...
Page 17 VGC-LN series models The area around the air exhaust vent (1) becomes hot while your computer is on. Be sure to wait until the computer cools down before you touch it. Air exhaust vent (page 139) Memory module compartment cover (page 124) HDMI INPUT port (page 69)
Page 18 Right Optical disc drive (page 51) Drive eject button (page 52) Hi-Speed USB (USB 2.0) ports (page 104) WIRELESS switch (page 88) HDMI SELECT button (page 70) MENU button (page 70) Up/Down buttons (page 70) OK button (page 70) Support high-/full-/low- speeds. Getting Started...
Page 19 Left ExpressCard/34 slot (page 74) Memory Stick slot (page 78) Media Access indicator (page 20) SD memory card slot (page 84) Headphones jack (page 102) Microphone jack Connect an external microphone. Line In jack Connect an external audio device for audio input. Hi-Speed USB (USB 2.0) port (page 104) Your computer supports both standard- and Duo-size Memory Stick.
Page 20: About The Indicator Lights
About the Indicator Lights Your computer is equipped with the following indicator lights: Indicator Functions Power 1 Illuminates in green when the computer is on, illuminates in orange while the computer is in Sleep mode, and turns off when the computer is off. Built-in MOTION EYE camera Illuminates while the built-in MOTION EYE camera is in use.
Page 21: Setting Up Your Computer
Setting Up Your Computer Removing and Replacing the Covers Before accessing some ports and jacks on the back of your computer, you first need to remove the back panel cover from the computer and the base stand cover from the base stand. To remove the back panel cover and the base stand cover Gently face down your computer on a flat surface.
Page 22 Getting Started Grasp the back panel cover (1) with both hands, gently lift it, and remove it from the computer. Put your fingertips underneath the back panel cover (2) when removing the cover from the computer.
Page 23 Getting Started Slide the base stand cover (3) in the direction of the arrow and remove it from the base stand.
Page 24 Getting Started To replace the back panel cover and the base stand cover Put the base stand cover (1) back on the base stand and slide it in the direction of the arrow.
Page 25 Getting Started Put the back panel cover (2) so as to fit the projections inside the cover into the respective holes on the back of the computer and push in the cover toward the computer. Keep the back panel cover and the stand cover on the computer unless access to the back panel is necessary.
Page 26 Connecting a Power Source and Cables A power cord is supplied with VGC-LV series models, and an AC adapter is supplied with VGC-LN series models to connect your computer to a power source. It must be plugged into the power source before you can establish communication with your wireless keyboard and mouse.
Page 27 Put the cable connected to the AC adapter through the hole (4) in the base stand and plug it into the DC IN port (5) as illustrated below. The shape of the DC In plug varies depending on the AC adapter. Be sure to push the plug all the way in.
Page 28 Getting Started ❑ VGC-LV series models Plug one end of the power cord (6) into the AC outlet (7), put the other end through the hole (8) in the base stand, and plug it into the AC In port (9) on the computer as illustrated below. Be sure to push the plug into the AC In port all the way to the guide (10).
Page 29 Connect other cables to the computer, if necessary. ❑ To set up TV connections available on models with the TV tuner board, see Using the TV Function ❑ To connect an HDMI cable to the HDMI INPUT port for using the HDMI Input function, see Using the HDMI Input Function (page 69).
Page 30: Connecting The Wireless Keyboard
Connecting the Wireless Keyboard A wireless keyboard and four AA alkaline batteries for use in the keyboard are supplied with your computer. Before attempting to use the wireless keyboard, you must install the batteries and establish communication between the computer and the keyboard.
Page 31 Getting Started ✍ You can check the battery indicator ( ) in the LCD window on the wireless keyboard for its battery power level. If the wireless keyboard does not operate properly, the batteries may need to be replaced. If you do not intend to use the wireless keyboard for an extended period of time, remove the batteries to avoid possible damage from battery leakage.
Page 32: Connecting The Wireless Mouse
Connecting the Wireless Mouse A wireless mouse and two AA alkaline batteries for use in the mouse are supplied with your computer. Before attempting to use the wireless mouse, you must install the batteries and establish communication between your computer and the mouse. ✍...
Page 33 Slide the power switch on the bottom of the mouse to the ON position. Press the CONNECT button (1) on the back of the computer. Press the CONNECT button on the bottom of the mouse within 10 seconds from step 4. Communication between the mouse and the computer should now be established.
Page 34: Preparing For Wall Mounting
Preparing for Wall Mounting Your computer is equipped with four holes on its back panel, which look similar to those compliant with the Video Electronics Standards Association (VESA) mounting standard, for connecting to your mounting system. Be sure to establish wireless communication between your computer and the wireless mouse and keyboard before mounting the computer on the wall. It is recommended that you allow adequate clearance between the wall and the back of your computer when mounting the computer on the wall so that you can access the ports and buttons on the back of the computer.
Page 35 To reveal the mounting holes Remove the back panel cover from the computer. See Removing and Replacing the Covers Unscrew the six screws (1) and remove the base stand (2). (page 21) for the procedure. Getting Started...
Page 36 Getting Started Use the four holes (3) for mounting by following the instructions described in the manual that came with your mounting system.
Page 37: Shutting Down Your Computer Safely
Shutting Down Your Computer Safely To avoid losing unsaved data, be sure to shut down your computer properly, as described below. To shut down your computer Turn off any peripherals connected to the computer. Click Start, the arrow next to the Lock button, and then Shut Down. Respond to any prompts warning you to save documents or to consider other users and wait for the computer to turn off automatically.
Page 38: Using Your Vaio Computer
Using Your VAIO Computer This section describes how to get the most out of using your VAIO computer. ❑ Using the Keyboard (page 39) ❑ Using the Touch Pad (page 43) ❑ Using the Mouse (page 44) ❑ Using the Built-in MOTION EYE Camera ❑...
Page 39: Using The Keyboard
Using the Keyboard A wireless keyboard is supplied with your computer. The wireless keyboard uses a standard key arrangement with additional keys that perform specific functions. The VAIO-Link web site (http://www.vaio-link.com) also contains glossary information to help you use the keyboard. Using the Wireless Keyboard To maintain good communication, operate the wireless keyboard within the distance limitations of keyboard: 10 m from your computer.
Page 40 ✍ Illustrated above is the English keyboard as an example. Using Your VAIO Computer Zoom buttons Change the view size of your screen. Press to make the screen view look smaller and further away (zoom out). Press to make the screen view look bigger and closer (zoom in).
Page 41 Indicators (Battery): turns on while the AA batteries for the wireless keyboard are sufficient and switches to batteries wear out. (Num lock): Turns on while in the Num Lock state. (Caps lock): Turns on while in the Caps Lock state. (Scroll lock): Turns on while in the Scroll Lock state.
Page 42 Using Your VAIO Computer Keyboard feet Flip open to adjust the keyboard angle. CONNECT button (page 30) Press to enable the wireless keyboard to communicate with the computer. Battery compartment Storage compartment for the AA batteries.
Page 43: Using The Touch Pad
Using the Touch Pad You can point to, select, drag, and scroll objects on the screen using the touch pad. Action Description Point Slide your finger on the touch pad (1) to place the pointer (2) on an item or object. Click Press the left button (3) once.
Page 44: Using The Mouse
Using the Mouse A wireless mouse is supplied with your computer. Using the Wireless Mouse The wireless optical mouse has no cables to plug in and uses a light-emitting diode (LED) instead of a ball. To maintain good communication, operate the wireless mouse within the distance limitations of mouse: 10 m from your computer. Confirm that the supplied AA batteries are properly installed.
Page 45 Using Your VAIO Computer Left button Click or double-click the left button to select items. To drag and drop items, hold the left button down while sliding the mouse, then release the button to drop the item. Central wheel Rotate the central wheel to scroll up or down a page. Press the wheel once to lock the scroll action and control the movement by moving the entire mouse (the scroll function is available only with applications that support it).
Page 46 Adjusting the Mouse Functions Click Start and Control Panel. Click Mouse under Hardware and Sound. The Mouse Properties window appears. Change the settings. Using Your VAIO Computer...
Page 47: Using The Built-In Motion Eye Camera
Using the Built-in MOTION EYE Camera Your computer is equipped with a built-in MOTION EYE camera. The built-in MOTION EYE camera adds video functionality to instant messaging software and video editing software and enables you to capture still images and movies with the preinstalled image capture software. Turning on the computer activates the built-in MOTION EYE camera.
Page 48 Using Your VAIO Computer The viewer window may show some noise, for example horizontal streaks, if you view a rapid-moving object. This is normal and does not indicate a malfunction. You cannot operate the built-in MOTION EYE camera with the Microsoft Windows Movie Maker software.
Page 49: To Capture A Still Image
Capturing Still Images To capture a still image Click Start, All Programs, ArcSoft WebCam Companion 2, and WebCam Companion 2 to launch the WebCam Companion 2. Click the Capture icon in the main window. Frame your subject in the viewfinder. Click the Capture button below the displayed image.
Page 50: Capturing Movies
Capturing Movies To capture a movie Click Start, All Programs, ArcSoft WebCam Companion 2, and WebCam Companion 2 to launch the WebCam Companion 2. Click the Record icon in the main window. Frame your subject in the viewfinder. Click the Record Video button below the displayed image to start movie recording. When finished, click the Record Video button once again to stop movie recording.
Page 51: Using The Optical Disc Drive
Using the Optical Disc Drive Your computer is equipped with an optical disc drive. To insert a disc Be sure to attach the 8 cm disc adapter to an 8 cm disc before inserting the disc into the optical disc drive slot. Slide the disc straight into the slot so as not to apply excessive pressure to the disc or slot.
Page 52: To Remove A Disc
To remove a disc The drive eject button is disabled when your computer is turned off. Do not remove the optical disc when your computer is in Sleep mode. Doing so may cause the computer to malfunction. Be sure not to pull out the optical disc forcefully before it completely slides out. Check that the Hard disk/Optical disc drive indicator light (1) is unlit.
Page 53 Using Your VAIO Computer Reading and Writing Optical Discs ™ Your computer plays and records CDs, DVDs, and Blu-ray Disc media, depending on the model you purchased. Check your specifications for the type of optical disc drive installed on your model. Use the table below to see which types of media your optical disc drive supports.
Page 54 Video Music Extra DVD±RW/ ±R DL/RAM Blu-ray Disc Combo Blu-ray Disc P Supports writing data to DVD-R discs compliant with DVD-R for General Version 2.0/2.1. Supports writing data to DVD-RW discs compliant with DVD-RW Version 1.1/1.2. The DVD±RW/RAM disc drive on your computer does not support the DVD-RAM cartridge. Use non-cartridge discs or discs with a removable cartridge. Writing data to single-sided DVD-RAM discs (2.6 GB) compliant with DVD-RAM Version 1.0 is not supported.
Page 55 When you buy pre-recorded or blank discs for use with your VAIO computer, be sure to read the notices on the disc package carefully to check both playback and recording compatibility with your computer's optical disc drives. Sony does NOT guarantee the compatibility of VAIO optical disc drives with discs that are not compliant with the official "CD,"...
Page 56 Notes on writing data to a disc ❑ Only use circular discs. Do not use discs in any other shape (star, heart, card, etc.), as this may damage the optical disc drive. ❑ Do not strike or shake your computer while the optical disc drive is writing data to a disc. ❑...
Page 57: Playing Cds
Playing CDs To play an audio CD Insert a disc into the optical disc drive. If nothing appears on the desktop, click Start, All Programs, and the desired CD software to play the CD. If the Audio CD window appears, click to select an option. Copying Files to CDs To copy files to a disc Insert a disc into the optical disc drive.
Page 58: Playing Dvds
Playing DVDs To play a DVD Close all running software applications. Insert a DVD into the optical disc drive. If nothing appears on the desktop, click Start, All Programs, and the desired DVD software to play the DVD. For instructions on how to use the software, see the help file included with your DVD software. Copying Files to DVDs To copy files to a disc Close all running software applications.
Page 59: Playing Blu-Ray Disc Media
Playing Blu-ray Disc Media To play a Blu-ray Disc media Close all running software applications. Insert a Blu-ray Disc media into the optical disc drive. If nothing appears on the desktop, click Start, All Programs, and the desired Blu-ray Disc software to play the disc. For instructions on how to use the software, see the help file included with your software.
Page 60: Using The Tv Function
Using the TV Function Your computer may have one hybrid TV tuner board installed along with the Microsoft Windows Vista Home Premium operating system which includes the Windows Media Center that enables TV program viewing, recording, and playback. See the online specifications to find out about your TV tuner board configuration. The hybrid TV-tuner supports the following broadcasts: ❑...
Page 61 To connect your computer to land-based (terrestrial) or cable TV services ✍ You need to remove the back panel cover from the computer and the base stand cover from the base stand before setting up the TV connection. See Removing and Replacing the Covers (page 21) Source and Cables (page...
Page 62: Using The Remote Commander
Using Your VAIO Computer Using the Remote Commander If your computer supports the TV function, then a remote commander is supplied with the computer for using a wide variety of AV related software applications, including Media Center.
Page 63 ✍ Illustrated above is the English remote commander as an example. Using Your VAIO Computer Pause X button Press to pause media playback. Press again to resume playback. Stop x button Press to stop media playback or TV recording session. Forward M button Press to fast-forward media at three speeds.
Page 64 Guide button Press to view the TV program guide for your area. Alphanumeric buttons Press to select specific channels or enter text. (Press ENTER or OK to activate the channel selection.) CLEAR button Press to backspace and delete entered text. Teletext TV program mode buttons Red button Press to jump to the red shortcut link in teletext TV program mode.
Page 65 Before you use the remote commander Before using the remote commander, you need to insert the supplied AA manganese batteries to enable communication between the computer and the remote commander. To insert batteries Turn the remote commander over. Slightly push down the dented area (1), slide the battery cover in the direction of the arrow, and remove the cover. Using Your VAIO Computer...
Page 66 Insert the supplied two AA batteries into the remote commander. Put the battery cover back on the remote commander and slide it in the reverse direction of the arrow illustrated above until the cover clicks into place. ✍ If the remote commander does not operate properly, you may need to replace the batteries. When the remote commander is not going to be used for an extended period of time, remove the batteries to avoid possible damage from battery leakage.
Page 67: Setting Up Windows Media Center
Using Your VAIO Computer Setting up Windows Media Center The first time you launch the Windows Media Center, the setup wizard will pop up. To configure the TV tuner, click Custom setup and follow the on-screen instructions. In the Optional Setup window, click Configure tuners, TV signal, and Guide and follow the on-screen instructions.
Page 68 Setting up TV Enhance pour VAIO The TV Enhance pour VAIO is available on French models sold in France only. The TV Enhance pour VAIO allows you to watch and record free-to-air standard definition and high definition digital terrestrial TV, improving your multimedia experience. To launch the application, start the Windows Media Center and go to TNT and select: ❑...
Page 69: Using The Hdmi Input Function
Using the HDMI Input Function Your computer is equipped with an HDMI INPUT port that enables you to connect a device with the HDMI output port, such as a hard disk drive recorder, to the computer. With the HDMI Input function, the computer can receive the high-definition video and sound outputs from the connected device and you can view and hear them on the computer without turning on your computer and starting Windows.
Page 70 Using the HDMI Input Control Buttons The HDMI input control buttons allow you to switch the display and sound input between the computer input and the HDMI input from the connected device and change the display and sound settings for the HDMI input. HDMI input control buttons HDMI SELECT button MENU button...
Page 71 Connecting and Using the HDMI-Compatible Device You need to connect the HDMI-compatible device to your computer with an HDMI cable to display the HDMI input from the device on the computer. Be sure to use an HDMI cable approved by HDMI Licensing, LLC. To connect your computer to the HDMI-compatible device ✍...
Page 72 To change the HDMI input volume Press the Up (V) or the Down (v) button to increase or decrease the volume. While the HDMI input is selected: - You can only use the Up/Down buttons to change the volume. You cannot use the volume control buttons on the wireless keyboard or the supplied remote commander to change the volume.
Page 73 You can change the display and sound settings for the HDMI input with the OSD menu. The following shows how to change the language mode of the OSD menu, enable or disable the Auto Input Sensing feature, and change the default SONY logo lamp activity while the HDMI input is selected.
Page 74: Using The Expresscard Module
Using Your VAIO Computer Using the ExpressCard Module Your computer is equipped with either a Universal ExpressCard slot or an ExpressCard/34 slot for transferring data among digital cameras, camcorders, music players, and other audio/video devices. The former can accommodate either an ExpressCard/34 (34 mm wide) or ExpressCard/54 (54 mm wide) module as shown below and the latter can accommodate only an ExpressCard/34 module...
Page 75: Inserting An Expresscard Module
Inserting an ExpressCard Module Your computer is supplied with a slot protector in the ExpressCard slot. Remove the slot protector before you use the slot. Use care when inserting or removing the ExpressCard module from the slot. Do not force it in or out of the slot. ✍...
Page 76 Using Your VAIO Computer Insert the ExpressCard slot protector to block any particles from entering the slot when not using an ExpressCard module. Before moving your computer, be sure to insert the ExpressCard slot protector into the slot. ✍ If the module or adapter does not go into the slot easily, remove it gently and verify you are inserting it in the proper direction. Make sure you use the most recent software driver provided by the ExpressCard module manufacturer.
Page 77: Removing An Expresscard Module
Removing an ExpressCard Module Follow the steps below to remove the ExpressCard module while your computer is on. If it is not removed properly, your system may not work properly. To remove an ExpressCard module ✍ To remove an ExpressCard module when your computer is off, skip steps 1 to 4. Double-click the Safely Remove Hardware icon on the taskbar.
Page 78: Using The Memory Stick
Using Your VAIO Computer Using the Memory Stick Memory Stick is a compact, portable, and versatile IC recording media especially designed for exchanging and sharing digital data with compatible products, such as digital cameras, mobile phones, and other devices. Because it is removable, it can be used for external data storage.
Page 79 For the latest information about the Memory Stick, visit the Memory Stick web site at http://www.memorystick.com/en/. Your computer has been tested and found compatible with Sony branded Memory Stick with capacity of up to 16 GB that are available as of May 2008.
Page 80 Inserting a Memory Stick To insert a Memory Stick Locate the Memory Stick slot (page Hold the Memory Stick with the arrow pointing toward the slot. Carefully slide the Memory Stick into the slot until it clicks into place. The Memory Stick is automatically detected by your system and the contents on the Memory Stick are displayed. If nothing appears on the desktop, click Start, Computer, and double-click the Memory Stick icon.
Page 81 Be sure to hold the Memory Stick with the arrow pointing in the correct direction as you insert it into the slot. To avoid damaging your computer or the Memory Stick, do not force the Memory Stick into the slot if you cannot insert it smoothly. Do not insert more than one Memory Stick into the slot.
Page 82 To format a Memory Stick The Memory Stick has been formatted in the factory default setting and is ready for use. If you want to reformat the media with your computer, follow these steps. Be sure to use the device that is designed to format the media and supports the Memory Stick when formatting the media. Formatting the Memory Stick erases the entire data on the media.
Page 83 Removing a Memory Stick Do not remove the Memory Stick while the Media Access indicator light is lit. If you do, you may lose data. Large volumes of data may take time to load, so make sure the indicator is unlit before removing the Memory Stick. To remove a Memory Stick Check that the Media Access indicator light is unlit.
Page 84: Using The Sd Memory Card
❑ SDHC memory card ❑ MultiMediaCard (MMC) For the latest information on compatible memory cards, see Sony Support Information support web site. Your computer has been tested and found compatible only with major memory cards available as of May 2008. However, not all memory cards that meet the same specifications as the compatible media are guaranteed of compatibility.
Page 85: Inserting An Sd Memory Card
Inserting an SD Memory Card To insert an SD memory card Locate the SD memory card slot Hold the SD memory card with the arrow pointing toward the slot. Carefully slide the SD memory card into the slot until it clicks into place. Do not force the card into the slot.
Page 86 Removing an SD Memory Card Do not remove an SD memory card while the To remove an SD memory card Check that the Media Access indicator light is unlit. Push in the SD memory card toward the computer and release. The SD memory card ejects.
Page 87: Using The Internet
Using Your VAIO Computer Using the Internet To use the Internet, you need to connect an external modem device, for example a USB telephone modem, an xDSL modem, or a cable modem, to your computer. For the detailed instructions on connection setups and modem configuration, see the manual that came with your modem.
Page 88: Using Wireless Lan (Wlan)
Using Wireless LAN (WLAN) Using the Sony Wireless LAN (WLAN), all your digital devices with built-in WLAN function communicate freely with each other through a network. A WLAN is a network in which a user can connect to a Local Area Network (LAN) through a wireless (radio) connection.
Page 89 Using Your VAIO Computer The IEEE 802.11b/g standard is a wireless LAN standard, using the 2.4 GHz bandwidth. The IEEE 802.11g standard provides high-speed communications, faster than the IEEE 802.11b standard. The IEEE 802.11a standard is a wireless LAN standard, using the 5 GHz bandwidth. The IEEE 802.11n draft standard is a wireless LAN standard, using the 2.4 or 5 GHz bandwidth.
Page 90: Communicating Without An Access Point (Ad-Hoc)
Using Your VAIO Computer Communicating without an Access Point (Ad-hoc) An ad-hoc network is a network in which a LAN is created only by the wireless devices themselves, with no other central controller or access point. Each device communicates directly with other devices in the network. You can set up an ad-hoc network easily at home.
Page 91 To communicate without an access point (ad-hoc) You cannot select the 5 GHz bandwidth, which is used for the IEEE 802.11a standard, on ad-hoc networks. The IEEE 802.11n draft standard, using the 2.4 or 5 GHz bandwidth, is not available on ad-hoc networks. Turn on the WIRELESS switch.
Page 92 Using Your VAIO Computer Communicating with an Access Point (Infrastructure) An infrastructure network is a network that extends an existing wired local network to wireless devices by providing an access point (not supplied). The access point bridges the wireless and wired LAN and acts as a central controller for the wireless LAN network.
Page 93 To connect to a wireless network Make sure an access point is set up. See the manual that came with your access point for more information. Turn on the WIRELESS switch. Click Start, All Programs, and VAIO Control Center. Click Network Connections and VAIO Smart Network. Click Advanced in the right pane.
Page 94 Using Your VAIO Computer Stopping Wireless LAN Communication To stop wireless LAN communication Click the button next to or above the WLAN icon in the VAIO Smart Network window. Turning off the wireless LAN function while accessing remote documents, files, or resources may result in data loss.
Page 95: Using The Bluetooth Function
Using the Bluetooth Function You can establish wireless communication between your computer and other Bluetooth devices such as another computer or a mobile phone. You can transfer data between these devices without cables at a range of up to 10 meters in an open area. To start Bluetooth communications Turn on the WIRELESS switch.
Page 96 Notes on using the Bluetooth function ❑ The data transfer rate varies, depending on the following conditions: ❑ Obstacles, such as walls, located between devices ❑ Distance between devices ❑ Material used in walls ❑ Proximity to microwaves and cordless telephones ❑...
Page 97 ❑ The 2.4 GHz band, with which Bluetooth devices or wireless LAN devices work, is used by various devices. Bluetooth devices use the technology to minimize the interference from other devices that use the same wave length. Simultaneous use of the Bluetooth function and wireless communication devices, however, may cause radio interference and result in reduced communication speeds and distances than the standard values.
Page 98 Bluetooth Security The Bluetooth wireless technology has an authentication function, which allows you to determine with whom you choose to communicate. With the authentication function, you can prevent any anonymous Bluetooth devices from accessing your computer. The first time two Bluetooth devices communicate, a common passkey (a password required for authentication) should be determined for both devices to be registered.
Page 99: Communicating With Another Bluetooth Device
Using Your VAIO Computer Communicating with Another Bluetooth Device You can connect your computer to a Bluetooth device such as another computer, a mobile phone, a PDA, a headset, a mouse, or a digital camera without the use of any cables. To communicate with another Bluetooth device To communicate with another Bluetooth device, you first need to set up the Bluetooth function.
Page 100 Stopping Bluetooth Communications To stop Bluetooth communications Turn off the Bluetooth device that is communicating with your computer. Click the button next to or above the Bluetooth icon in the VAIO Smart Network window. Using Your VAIO Computer...
Page 101: Using Peripheral Devices
Using Peripheral Devices Using Peripheral Devices You can add functionality to your VAIO computer by using the various ports on the computer. ❑ Connecting External Speakers (page 102) ❑ Connecting a Universal Serial Bus (USB) Device (page 104) ❑ Connecting a Printer (page 106) ❑...
Page 102: Connecting External Speakers
Connecting External Speakers You can connect external sound output devices (not supplied), such as speakers or headphones, to your computer. Since your computer is capable of outputting digital signals through the OPTICAL OUT port, you can connect an S/PDIF device such as digital headphones or an AV amplifier to the port and enhance the sound quality of your computer. For more information, see the manual that came with your S/PDIF device.
Page 103: To Connect External Speakers
To connect external speakers Plug the speaker cable (1) (not supplied) into the headphones jack (2) i. Plug the other end of the speaker cable to the external speaker (3). Turn down the volume of the speakers before you turn them on. ✍...
Page 104: Connecting A Universal Serial Bus (Usb) Device
Connecting a Universal Serial Bus (USB) Device To protect your computer and/or USB devices from damage, avoid exposing the USB ports to shock or impact when moving the computer with USB devices connected. Connecting a USB Floppy Disk Drive You can purchase a USB floppy disk drive and connect it to your computer. To connect a USB floppy disk drive Choose the USB port (1) you prefer to use.
Page 105: Disconnecting A Usb Floppy Disk Drive
Disconnecting a USB floppy disk drive You can disconnect a USB floppy disk drive when your computer is on or off. Disconnecting the drive when the computer is in Sleep mode may cause the computer to malfunction. To disconnect a USB floppy disk drive ✍...
Page 106: Connecting A Printer
Connecting a Printer You can connect a Windows-compatible printer to your computer to print documents. Connecting a Printer Using the USB Port You can connect a USB printer compatible with your version of Windows to the computer. To connect a printer using the USB port Plug the power cord (1) of your printer into an AC outlet.
Page 107: Connecting An I.link Device
Connecting an i.LINK Device Notes on connecting i.LINK devices ❑ Your computer is equipped with an i.LINK port, which you can use to connect an i.LINK device, such as a digital video camcorder. ❑ The i.LINK port on your computer does not supply power to external devices that are generally powered through i.LINK ports.
Page 108: Connecting A Digital Video Camcorder
On Sony digital video cameras, ports labeled DV Out, DV In/Out, or i.LINK are i.LINK-compatible. The Sony digital video camcorder shown here is an example. Your digital video camcorder may need to be connected differently. You cannot access the pictures stored on a Memory Stick when using an i.LINK connection.
Page 109: Connecting To A Network (Lan)
Connecting to a Network (LAN) You can connect your computer to 1000BASE-T/100BASE-TX/10BASE-T-type networks with an Ethernet network cable. Connect one end of a network cable (not supplied) to the network (Ethernet) port on the back of the computer and the other end to your network.
Page 110 Using Peripheral Devices Do not plug a telephone cable into the network (LAN) port on your computer. If the network (LAN) port is connected to one of the telephone lines mentioned below, high electric current to the port may cause damage, overheating, or fire.
Page 111: Customizing Your Vaio Computer
Customizing Your VAIO Computer This section briefly describes how to change the main settings of your VAIO computer. Among other things, you will learn how to use and customize the look of your Sony software and utilities. ❑ Setting the Password (page 112) ❑...
Page 112: Setting The Password
Setting the Password Use one of the BIOS functions to set the password. Once you have set the password, you will be prompted to enter the password after the VAIO logo appears to start your computer. The power-on password allows you to protect your computer from unauthorized access. Adding the Power-on Password The power-on password is provided to protect your computer from unauthorized access.
Page 113 To add the power-on password (machine password) Turn on the computer. Press the F2 key when the VAIO logo appears. The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo appears.
Page 114 To add the power-on password (user password) Make sure you set the machine password before setting the user password. Turn on the computer. Press the F2 key when the VAIO logo appears. The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo appears.
Page 115: Changing/Removing The Power-On Password
Changing/Removing the Power-on Password To change or remove the power-on password (machine password) Turn on the computer. Press the F2 key when the VAIO logo appears. The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo appears.
Page 116 To change or remove the power-on password (user password) Turn on the computer. Press the F2 key when the VAIO logo appears. The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo appears.
Page 117: Setting Up Your Computer With Vaio Control Center
Some of the control items will not be visible if you open the VAIO Control Center as a standard user. Changing the default SONY logo lamp activity The SONY logo lamp illuminates when you turn on your computer. You can change this default activity of the lamp to make it stay unlit by following these steps: Click Start, All Programs, and VAIO Control Center.
Page 118: Using The Power Saving Mode
Customizing Your VAIO Computer Using the Power Saving Mode In addition to the normal operating mode, which allows you to turn off specific devices, your computer has a distinct power saving mode called Sleep mode. Using Normal Mode This is the normal state of the computer when it is in use. The green power indicator light is lit in this mode. To save power while not working, you can turn off a specific device such as the LCD screen or the hard disk drive.
Page 119: Using Sleep Mode
Using Sleep Mode Sleep mode turns off the LCD screen and places the hard disk drive and the CPU into a low power consumption mode. The orange power indicator light illuminates in this mode. Turn off your computer if you do not intend to use it for a long period of time. To activate Sleep mode Click Start, the arrow next to the Lock button, and Sleep.
Page 120 If the computer is not used for a certain period of time, it will enter Sleep mode. To modify this, you can change the Sleep mode settings. To change the Sleep mode settings Click Start, Control Panel, Hardware and Sound, and Power Options. Click Change plan settings under the current power plan.
Page 121: Upgrading Your Vaio Computer
Upgrading Your VAIO Computer Upgrading Your VAIO Computer Your VAIO computer and memory modules use high precision components and electronic connectors technology. To avoid invalidation of the warranty during your product warranty period, we recommend that: ❑ You should contact your dealer to install a new memory module. ❑...
Page 122: Adding And Removing Memory
Adding and Removing Memory If you want to expand the functionality of your computer, you can increase the amount of memory by installing optional memory modules. Before you upgrade your computer's memory, read the notes and procedures in the following pages. Notes on adding/removing memory modules ❑...
Page 123 ❑ Use the special bag supplied with the memory module or wrap the module in aluminum foil to protect it from ESD. ❑ Introducing any liquids, foreign substances, or objects into the memory module slots or other internal components of your computer will result in damage to the computer and any repair costs will not be covered by the warranty.
Page 124: Removing And Installing A Memory Module
Removing and Installing a Memory Module To change or add a memory module Shut down the computer, turn off all peripheral devices, and disconnect peripheral devices from the accessible ports and jacks. Remove the back panel cover from the computer. See Removing and Replacing the Covers Disconnect the power cord or the AC adapter and the rest of the peripheral devices.
Page 125 Touch a metal object to discharge static electricity. Remove the currently installed memory module as follows: ❑ Pull the latches in the direction of the arrows (1). The memory module is released. ❑ Make sure that the memory module tilts up and then pull it out in the direction of the arrow (2). Upgrading Your VAIO Computer...
Page 126 Remove the new memory module from its packaging. Slide the memory module into the memory module slot and push it in until it clicks into place. Do not touch any other components on the motherboard. If you want to install only one memory module, be sure to use the lower slot. Be sure to insert the connector edge of the memory module into the slot while aligning the notch on the module with the small projection in the open slot.
Page 127 Upgrading Your VAIO Computer 10 Replace the memory module compartment cover and tighten the screw. 11 Connect the power cord or the AC adapter and the peripheral devices that you disconnected in step 3. 12 Replace the back panel cover. See Removing and Replacing the Covers (page 21) for the procedure.
Page 128: Viewing The Amount Of Memory
Viewing the Amount of Memory To view the amount of memory Turn on the computer. Click Start, All Programs, and VAIO Control Center. Click System Information and System Information. You can view the amount of system memory in the right pane. If the additional memory does not appear, repeat the installation procedure and restart the computer.
Page 129: Adding The Hard Disk Drive
Adding the Hard Disk Drive If your computer is a VGC-LV series model, it is equipped with the HARD DISK DRIVE ACCESS BAY to hold an additional 3.5-inch hard disk drive. Review the manufacturer's information provided with your new hard disk drive before attempting to install it in the computer. Some hard disks are not compatible with your computer.
Page 130: Installing An Additional Hard Disk Drive
Installing an Additional Hard Disk Drive To install an additional hard disk drive Shut down the computer, turn off all peripheral devices, and disconnect peripheral devices from the accessible ports and jacks. Remove the back panel cover from the computer. See Removing and Replacing the Covers Disconnect the power cord and the rest of the peripheral devices.
Page 131 Unscrew the two screws (3) securing the drive holder. Pull out the drive holder (4) from the HARD DISK DRIVE ACCESS BAY and set it aside. Upgrading Your VAIO Computer...
Page 132 Place a new drive into the drive holder and align the holes on each side of the drive holder. Secure the drive to the drive holder with screws, through the holes on each side of the drive holder. A new hard disk drive comes with the necessary screws. Do not overtighten these screws when securing the drive to the drive holder. 10 Slide the drive holder into the drive bay until it clicks into place and secure it with the screws.
Page 133 Upgrading Your VAIO Computer 11 Connect the Serial ATA power cable and the Serial ATA cable. 12 Tighten the screws to secure the drive holder. 13 Replace the drive bay cover and tighten the screws. 14 Connect the power cord and the peripheral devices that you disconnected in step 3. 15 Replace the back panel cover.
Page 134: Identifying The Additional Hard Disk Space
Identifying the Additional Hard Disk Space When you initialize the new hard disk, it must be configured as an extended partition in Windows NT file system (NTFS) format. To identify the additional hard disk space Log on to Windows as a user with administrative rights. Click Start, right-click Computer, and select Manage.
Page 135: Precautions
Precautions Precautions This section describes safety guidelines and precautions to help you protect your VAIO computer from potential damage. ❑ Handling the LCD Screen (page 136) ❑ Using the Power Source (page 137) ❑ Handling Your Computer (page 138) ❑ Handling the Built-in MOTION EYE Camera (page 141) ❑...
Page 136: Handling The Lcd Screen
❑ Do not change the LCD screen orientation setting in the Tablet PC Settings window even when there are change options available for selection, as this may make your computer unstable. Sony assumes no liability for any malfunctions arising from changes to the settings.
Page 137: Using The Power Source
❑ Make sure that the AC outlet is easily accessible. ❑ Use the power cord or the AC adapter supplied with your computer or genuine Sony products. Do not use any other power cord or AC adapter as it may cause a malfunction.
Page 138: Handling Your Computer
Handling Your Computer ❑ Clean the cabinet with a soft cloth, which is dry or lightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent such as alcohol or benzine, as these may damage the finish of your computer.
Page 139 ❑ When holding your computer, be sure to wait until it cools down. The back of your computer may be extremely hot around the air exhaust vent (1). The appearance of your computer and the location of the ports may be different from those illustrated above due to variations in specifications. It may also vary in some countries or areas.
Page 140 ❑ To avoid losing data when your computer is damaged, back up your data regularly. ❑ Do not grasp the base stand to lift your computer as the stand may break and cause the main unit to fall, resulting in damage to the computer or personal injuries.
Page 141: Handling The Built-In Motion Eye Camera
Handling the Built-in MOTION EYE Camera ❑ Do not touch the lens protection cover of the built-in MOTION EYE camera, as it may cause scratches on the cover and such scratches will appear on the captured images. ❑ Do not let the direct sunlight get into the lens of the built-in MOTION EYE camera regardless of your computer's power state, as it may cause the camera to malfunction.
Page 142: Handling Floppy Disks
Handling Floppy Disks ❑ Do not open the shutter manually and touch the internal components of the floppy disk. ❑ Keep floppy disks away from magnets. ❑ Keep floppy disks away from direct sunlight and other sources of heat. ❑ Keep floppy disks away from any liquid. Do not let them get wet. When you are not using your floppy disk, always remove it from the floppy disk drive and put it in a storage case.
Page 143: Handling Discs
Handling Discs ❑ Do not touch the surface of the disc. ❑ Fingerprints and dust on the surface of a disc may cause read errors. Always hold the disc by its edges and central hole, as shown below: ❑ Proper care of the disc is essential to its continuous reliability. Do not use solvents (such as benzine, thinner, alcohol, commercially available cleaners, or anti-static spray) which may cause damage to the disc.
Page 144 ❑ An 8 cm disc adapter exclusively designed for your model is provided for use of 8 cm discs on your computer. ❑ Be sure to attach the adapter to an 8 cm disc before using it on your computer. Not using the supplied adapter or using a similar kind of the adapter with the disc may cause a disc recognition error or result in a stuck disc, a damaged disc, or a malfunction of your computer.
Page 145: Using Headphones
Precautions Using Headphones Preventing hearing damage – Avoid using headphones at high volume. Hearing experts advise against continuous, loud and extended play. If you experience a ringing in your ears, reduce the volume or discontinue use.
Page 146: Handling The Memory Stick
Handling the Memory Stick ❑ Do not touch the Memory Stick connector with your finger or metallic objects. ❑ Use only the adhesive label supplied with the Memory Stick as a label. ❑ Do not bend, drop, or expose the Memory Stick. ❑...
Page 147: Handling The Hard Disk
Handling the Hard Disk The hard disk drive has a high storage density and reads or writes data in a short time. However, it can be easily damaged by mechanical vibration, shock, or dust. Although the hard disk drive has the internal safety device to prevent losing data due to mechanical vibration, shock or dust, you should be careful when handling your computer.
Page 148: Updating Your Computer
Updating Your Computer Be sure to install the latest updates on your computer with the following software applications so that the computer can run more efficiently. ❑ Windows Update Click Start, All Programs, and Windows Update and then follow the on-screen instructions. ❑...
Page 149: Troubleshooting
Troubleshooting This section describes how to solve common problems you might encounter when using your VAIO computer. Many problems have simple solutions. Try these suggestions before contacting VAIO-Link. ❑ Computer (page 150) ❑ System Security (page 156) ❑ Built-in MOTION EYE Camera ❑...
Page 150: Computer
❑ Remove any extra memory modules you may have installed since purchase. ❑ Check that you are using the supplied Sony power cord or AC adapter. For your safety, use only the genuine Sony power cord or AC adapter, which is supplied by Sony for your VAIO computer.
Page 151 What should I do if the green power indicator light turns on but my screen remains blank? ❑ If the orange DISPLAY OFF indicator is lit, press the DISPLAY OFF button. ❑ Make sure the computer input is selected. To change the display input, press the HDMI SELECT button on the right of the computer.
Page 152 What should I do if my computer or software stops responding? ❑ If your computer stops responding while a software application is running, press the Alt+F4 keys to close the application window. ❑ If the Alt+F4 keys do not work, click Start, the arrow next to the Lock button, and Shut Down to turn off your computer. ❑...
Page 153: Why Doesn't My Computer Enter Sleep Mode
Why doesn't my computer enter Sleep mode? Your computer may become unstable if the operating mode is changed before the computer completely enters Sleep mode. To restore your computer to normal mode Close all open programs. Click Start, the arrow next to the Lock button, and Restart. If your computer does not restart, press the Ctrl+Alt+Delete keys and click the arrow next to the Shut down button and Restart.
Page 154: How Can I Change The Boot Device Order
What should I do if my game software does not work or it keeps crashing? ❑ Check the web site of the game if there are any patches or updates to download. ❑ Make sure you have installed the latest video driver. ❑...
Page 155: How Do I Check The Volume Of The Recovery Partition
Why doesn't my screen turn off after the automatic turn-off time has passed? The VAIO Original Screen Saver disables the timer setting, which you can select using the Windows power options, for your screen to turn off. Select a screen saver other than the VAIO Original Screen Saver. What should I do if I cannot boot my computer from the USB floppy disk drive connected to the computer? To boot your computer from the USB floppy disk drive, you need to change the boot device.
Page 156: System Security
System Security How can I protect my computer against security threats, such as viruses? The Microsoft Windows operating system is preinstalled on your computer. The best way to protect your computer against security threats, such as viruses, is to download and install the latest Windows updates regularly. You can get important Windows updates by doing the following: Your computer must be connected to the Internet before you can receive updates.
Page 157: Built-In Motion Eye Camera
Built-in MOTION EYE Camera Why does the viewer window show no images or poor-quality images? ❑ The built-in MOTION EYE camera cannot be shared by more than one software application. If another software application is using the camera, exit the application before using the built-in MOTION EYE camera. ❑...
Page 158: Why Can't I Use The Built-In Motion Eye Camera
Why do the images captured by the built-in MOTION EYE camera flicker? This problem occurs when you use the camera under fluorescent lights due to the mismatch between lighting output frequency and shutter speed. To reduce flicker noise, change the direction of the camera or the brightness of camera images. In some software applications, you can set an appropriate value to one of the camera properties (e.g.
Page 159 Troubleshooting What should I do if my computer becomes unstable when it enters a power saving mode while the built-in MOTION EYE camera is in use? ❑ Do not place your computer into Sleep mode while you are using the built-in MOTION EYE camera. ❑...
Page 160: Networking
Networking What should I do if my computer cannot connect to a wireless LAN access point? ❑ Connection capability is affected by distance and obstructions. You need to place your computer away from obstructions or move any access point you may be using closer to the computer. ❑...
Page 161: Why Is The Data Transfer Speed Slow
❑ Wireless LAN communication uses divided frequency bands known as channels. Third-party wireless LAN access point channels may be preset to different channels from Sony devices. ❑ If you are using a wireless LAN access point, see connectivity information contained in the manual that came with your access point.
Page 162 Why does the network connection stop when I change the encryption key? Two computers with the wireless LAN function may lose a peer-to-peer network connection if the encryption key is changed. You can either change the encryption key back to the original profile or re-enter the key on both computers so the key matches.
Page 163: Bluetooth Technology
Bluetooth Technology What should I do if other Bluetooth devices cannot find my computer? ❑ Make sure both devices have the Bluetooth function enabled. ❑ If the WIRELESS indicator light is unlit, turn on the WIRELESS switch. ❑ Your computer and the device may be too far apart. Wireless Bluetooth technology works best when the devices are within 10 meters of each other.
Page 164 What should I do if other Bluetooth devices cannot connect to my computer? ❑ Make sure the other devices are authenticated. ❑ To allow other Bluetooth devices to communicate with your computer, follow these steps: Click Start, Control Panel, Hardware and Sound, Bluetooth Devices, and Bluetooth Settings. Click the Options tab and select the Allow Bluetooth devices to find this computer check box.
Page 165: Why Is My Bluetooth Connection Slow
Why is my Bluetooth connection slow? ❑ The data transfer speed depends on the obstructions and/or the distance between the two devices, on the radio wave quality, and on the operating system or the software in use. Move Bluetooth devices closer to your computer. ❑...
Page 166 Troubleshooting Why can't I use the Bluetooth function when I log onto my computer as a user with a standard user account? The Bluetooth function may not be available to a user with a standard user account on your computer. Log onto the computer as a user with administrative rights.
Page 167: Optical Discs
Optical Discs Why does my computer freeze when I try to read a disc? The disc that your computer is trying to read may be dirty or damaged. Follow these steps: Press the Ctrl+Alt+Delete keys and click the arrow next to the Shut down button and Restart to restart the computer. Remove the disc from the optical disc drive.
Page 168 What should I do if I cannot play a disc properly on my computer? ❑ Make sure the disc is inserted into the optical disc drive with the label side facing toward you. ❑ Make sure the necessary program(s) is installed according to the manufacturer's instructions. ❑...
Page 169 Click Device Manager on the left pane. The Device Manager window appears with a listing of your computer's hardware devices. If an "X" or an exclamation point appears on the listed device, you may need to enable the device or reinstall the drivers.
Page 170 What should I do if I cannot play Blu-ray Disc media? You may not be able to play some Blu-ray Disc contents on your computer. To play such contents, download and install the latest updates for WinDVD BD using VAIO Update. To download and install the updates on the computer, it must be connected to the Internet.
Page 171: Display
Display Why did my screen go blank? ❑ Your computer screen may go blank if the computer enters Sleep mode. If the computer is in Sleep mode, press any key to bring the computer back into Normal mode. See Using the Power Saving Mode ❑...
Page 172: Printing
Printing What should I do if I cannot print a document? ❑ Make sure your printer is on, and the printer cable is securely connected to the ports on the printer and your computer. ❑ Make sure your printer is compatible with the Windows operating system installed on your computer. ❑...
Page 173: Microphone
Microphone What should I do if my microphone does not work? ❑ If you are using an external microphone, make sure the microphone is turned on and is properly plugged into the microphone jack on your computer. ❑ Your sound input device may have been incorrectly configured. To configure the sound input device, follow these steps: Close all open programs.
Page 174: Mouse
Mouse What should I do if my computer does not recognize my mouse? ❑ Make sure the power switch on the bottom of the wireless mouse is in the ON position. ❑ Make sure another mouse is not connected. ❑ Make sure the supplied AA batteries are properly installed. ❑...
Page 175: Speakers
Speakers What should I do if my external speakers do not work? ❑ If you are using a program that has its own volume control, make sure the volume control is properly set. See the program's help file for more information. ❑...
Page 176 What should I do if I do not hear sound from the built-in speakers? ❑ If you are using a program that has its own volume control, make sure the volume control is properly set. See the program's help file for more information. ❑...
Page 177: Touch Pad
Touch Pad What should I do if the touch pad does not work? ❑ You may have disabled the touch pad. Press the Fn+F11 keys to enable the touch pad. ❑ If the pointer does not move while a software application is running, press the Alt+F4 keys to close the application window. ❑...
Page 178: Keyboard
Keyboard What should I do if the keyboard configuration is wrong? The language layout of your wireless keyboard is labeled on the packaging box. If you choose a different regional keyboard when you complete the Windows setup, the key configuration will be mismatched. To change the keyboard configuration, follow these steps: Click Start and Control Panel.
Page 179: Floppy Disks
Floppy Disks Why doesn't the Safely Remove Hardware icon appear on the taskbar when the drive is connected? Your computer does not recognize the floppy disk drive. First, make sure the USB cable is properly connected to the USB port. If you need to secure the connection, wait a few moments for the computer to recognize the drive. If the icon still does not appear, follow these steps: Close all programs that are accessing the floppy disk drive.
Page 180: Audio/Video
✍ i.LINK is a trademark of Sony Corporation used only to designate that a product contains an IEEE 1394 connection. The procedure to establish an i.LINK connection may vary, depending on a software application, an operating system, and a compatible i.LINK device. Not all products with an i.LINK connection can communicate with each other.
Page 181: How Do I Change The Sound Output Device
How do I change the sound output device? If you do not hear sound from the device connected to the OPTICAL OUT port, you need to change the device for sound output. Close all open programs. Click Start and Control Panel. Click Hardware and Sound.
Page 182 How do I output the Dolby Digital or DTS sound through an S/PDIF-compatible device? To output the Dolby Digital or DTS sound from a disc through an S/PDIF-compatible device connected to your computer, follow these steps: Click Start and Control Panel. Click Hardware and Sound.
Page 183: Hdmi
HDMI What should I do if I cannot change the volume with the Up/Down buttons? You cannot change the volume with the Up/Down buttons while the computer input is selected. Use the volume control buttons on the wireless keyboard or the remote commander instead. ✍...
Page 184 How do I turn off the Sony logo lamp while viewing the HDMI input? You need to change the settings with the OSD menu to turn off the Sony logo lamp. See Changing the Display and Sound Settings for the HDMI Input (page 73) for more information.
Page 185: Memory Stick
Use of recorded music requires permission from the copyright holders. Sony is not responsible for music files that cannot be recorded from a CD or downloaded from other sources. Can I copy images from a digital camera using Memory Stick? Yes, and you can view video clips that you have recorded with Memory Stick-compatible digital cameras.
Page 186: Peripherals
Peripherals What should I do if I cannot connect a USB device? ❑ If applicable, check the USB device is turned on and using its own power supply. For example, if you are using a digital camera, check if the battery is charged. If you are using a printer, check if the power cable is connected properly to the AC outlet.
Page 187: Support Options
Support Options Support Options This section contains information on where to go for answers to questions about your VAIO computer. ❑ Sony Support Information (page 188) ❑ e-Support (page 189)
Page 188: Sony Support Information
Internet. Using a personalized account, you can log your technical queries with ease. ❑ VAIO-Link help lines: Before contacting VAIO-Link by telephone, try to solve the problem by reading the printed and non- printed documentation. ❑ Visit the other Sony web sites: ❑ http://www.club-vaio.com if you want to know more about VAIO and become part of the growing VAIO community.
Page 189: E-Support
Support Options e-Support What is e-Support? If you have searched our user guides and web site (http://www.vaio-link.com) but have not found an answer to your question or issue, use e-Support to solve it. Our e-Support Web Portal is an interactive web site on which you can submit any technical query you may have regarding your computer and receive answers from our dedicated support team.
Page 190 Support Options Can I submit my questions at any time? Yes, you can submit your questions 24/7, but keep in mind that our e-Support Team can only answer your queries from Monday till Friday between 8 am and 6 pm. Is there a cost involved for using e-Support? No, this is a free of charge service offered to all registered VAIO customers.
Page 191: Trademarks
Ready 2007 and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the U.S. and other countries. i.LINK is a trademark of Sony used only to designate that a product contains an IEEE 1394 connection. Roxio Easy Media Creator is a trademark of Sonic Solutions.
Page 192 Trademarks The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc., and any use of such marks by Sony Corporation is under license. Other trademarks and trade names are those of their respective owners. Design and specifications are subject to change without notice.

This manual is also suitable for:

Vgc-ln1mr Vgc-lv1s Vgc-lv1sr Vaio vgc-lv series Vaio vgc-ln series

Sony VGC-LN1M User Manual

Quick Links

User Guide

Related Manuals for Sony VGC-LN1M

Summary of Contents for Sony VGC-LN1M

This manual is also suitable for:

Table of Contents