Selecting Computer System - Canon LV-7575 User Manual
Canon multimedia projector user's manual lv-7575
Hide thumbs
Also See for LV-7575:
- Brochure & specs (10 pages) ,
- Specifications (26 pages) ,
- Specifications (71 pages)
Table of Contents
Advertisement
WHEN SELECTING INPUT 2 (5 BNC INPUT JACKS )
When connecting a computer output [5 BNC Type (Green,
Blue, Red, Horiz. Sync, and Vert. Sync.)] from a computer to
G, B, R, H/HV, and V jacks:
1
Press the MENU button to display the On-Screen
Menu. Press the POINT LEFT/RIGHT buttons to move
the red frame pointer to the INPUT Menu icon.
2
Press the POINT UP/DOWN buttons to move the red
arrow pointer to Input 2 and then press OK button. A
Source Select Menu appears.
3
Press the POINT UP/DOWN buttons and a red-arrow
icon appears. Move the arrow to "RGB," and then
press the OK button.
NOTE:
• INPUT SOURCE changes if the INPUT 2 button on the remote control unit is
pressed.
SELECTING COMPUTER SYSTEM
This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, SXGA+,
WXGA, or UXGA (refer to "COMPATIBLE COMPUTER SPECIFICATIONS" on pages 55–56). When Computer is
selected, this projector automatically detects the incoming signal and projects proper image without any
additional setting. (Some computers need to be set manually.)
The projector displays one of these: Auto, -----, Mode 1–10, or the system provided in the projector.
When the projector cannot recognize a connected
Auto
signal as PC system provided in this projector, the Auto
PC Adjustment function operates to adjust the projector
and "Auto" is displayed on the SYSTEM Menu icon.
When the image is not provided properly, a manual
adjustment is required. (See pages 27–28.)
There is no signal input from the computer. Make sure
-----
the connection of a computer and the projector is set
correctly. (See "TROUBLESHOOTING" on page 50.)
The User preset adjustment in MANUAL PC
Mode 1
ADJUSTMENT. The Adjusted data can be stored in the
Mode 1–10.
PC systems provided in this projector. The projector
SVGA 1
chooses proper system and displays it.
✽ Mode 1 and SVGA 1 are examples.
SELECTING COMPUTER SYSTEM MANUALLY
This projector automatically selects PC system among those
provided in this projector, however, PC system can be also
selected manually.
1
Press the MENU button to display the On-Screen
Menu. Press the POINT LEFT/RIGHT buttons to move
the red frame pointer to the PC SYSTEM Menu icon.
2
Press the POINT UP/DOWN buttons to move the red
arrow pointer to the desired system, and then press
OK button.
AUTOMATIC MULTI-SCAN SYSTEM
COMPUTER INPUT
INPUT MENU
INPUT Menu icon
Move the pointer (red arrow) to Input
2 and press the OK button.
Input 2
Source Select Menu
Move the pointer (red
arrow) to RGB and press the
OK button.
PC SYSTEM MENU
PC SYSTEM Menu icon
Displays system being selected.
PC SYSTEM MENU
PC SYSTEM Menu icon
Displays system being selected.
Systems in this dialog box can be
selected.
Custom Mode (1–10) set in PC
ADJUST Menu. (pp.27–28)
25
Advertisement
Table of Contents
