hit counter script

Advertisement

Quick Links

L6TBN6400
USER
MANUAL
EN
User Manual
Washing Machine

Advertisement

Table of Contents
loading

Summary of Contents for AEG L6TBN6400

  • Page 1 L6TBN6400 User Manual Washing Machine USER MANUAL...
  • Page 2: Table Of Contents

    16. QUICK GUIDE....................33 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
  • Page 3: Safety Information

    ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
  • Page 4: Safety Instructions

    This appliance is intended to be used in household • and similar applications such as: staff kitchen areas in shops, offices and other – working environments; by clients in hotels, motels, bed & breakfast and – other residential type environments;...
  • Page 5 ENGLISH future they must be reattached to lock be replaced, this must be carried out the drum to prevent an internal by our Authorised Service Centre. damage. • Connect the mains plug to the mains • Always take care when moving the socket only at the end of the appliance as it is heavy.
  • Page 6: Product Description

    • Do not wash fabrics which are heavily such as detergent dispensers. Please soiled with oil, grease or other greasy note that some of these spare parts substances. It can damage rubber are only available to professional parts of the washing machine.
  • Page 7 ENGLISH 3.2 Appliance overview 10 11 Control panel Drain hose Mains cable Lid handle Transit bolts Drain pump filter Hose support Lever to move the appliance Rating plate Feet for levelling the appliance Inlet hose Information for register product. The rating plate reports the model name The info label reports the model name (A), (A) , product number (B), electrical product number (B ) and serial number (C).
  • Page 8: Technical Data

    4. TECHNICAL DATA Dimension Width/ Height/ Total depth 39,7 cm /90,3 cm /59,9 cm Electrical connection Voltage 230 V Overall power 2200 W Fuse 10 A Frequency 50 Hz Level of protection against ingress of solid particles and IPX4 moisture ensured by the protective cover, except where the low voltage equipment has no protection against mois‐...
  • Page 9 ENGLISH We recommend that you keep the packaging and the transit bolts for any transport of the appliance. Adjust the appliance correctly to prevent vibration, noise and movement of the appliance when it operates. WARNING! Do not put cardboard, wood or equivalent materials below the appliance feet to adjust the level.
  • Page 10 5.3 Water drainage min.600 mm max.1000 mm The drain hose should stay at a height of no less than 600 mm and not more than 1000 mm. You can extend the drain hose to maximum 4000 mm. Contact the authorised service centre for the other drain hose and the extension.
  • Page 11: Control Panel

    ENGLISH 6. CONTROL PANEL 6.1 Control panel description 12 11 Vlekken/Voorwas skipping touch Aan/Uit push button button Programme dial • Vlekken option Display • Voorwas option Startuitstel touch button Anti-allergie touch button Tijd Besparen touch button Vloeibaar wasmiddel touch button Spoelen skipping touch button Centrif.
  • Page 12 Maximum laundry indicator. It flashes when the laundry load exceeds the maximum declared load of the selected programme. Lid locked indicator. Delay start indicator. The digital indicator can show: • Programme duration (e. g. • Delay time (e. g.
  • Page 13: Programme Chart

    ENGLISH 7. PROGRAMME CHART Washing programmes Programme Default Reference Maxi‐ Programme description tempera‐ spin speed ture Spin speed load Tempera‐ range ture range White cotton and fast-coloured cotton. Normally soiled items. The 1400 rpm energy consumption decreases and Eco 40-60 1400-400 6 kg 40 °C...
  • Page 14 Programme Default Reference Maxi‐ Programme description tempera‐ spin speed ture Spin speed load Tempera‐ range ture range Do not us fabric soft‐ ener and make sure there is no softener residue in the deter‐ gent dispenser. Outdoor clothing, technical, sport fabrics, waterproof and breatha‐...
  • Page 15 ENGLISH Programme Default Reference Maxi‐ Programme description tempera‐ spin speed ture Spin speed load Tempera‐ range ture range All fabrics, except woollens and 1400 rpm delicate fabrics. To spin the laun‐ Centrif./ 1400 rpm - 6 kg dry and to drain the water in the Pompen 400 rpm drum.
  • Page 16 OPTIONS ■ ■ ■ ■ ■ ■ ■ ■ ■ Only rinse ■ Anti-allergie ■ ■ ■ ■ ■ Tijd besparen ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Startuitstel ■ ■ ■ ■ ■ ■ ■...
  • Page 17: Options

    ENGLISH 7.1 Woolmark Apparel Care - Blue The wool wash cycle of this machine has been approved by The Woolmark Company for the washing of wool garments labelled as «hand wash» provided that the garments are washed according to the instructions issued by the manufacturer of this washing machine.
  • Page 18 8.6 Spoelen The intermediate and the final spinning phases are suppressed and With this button you can select one of the the programme ends with water in the following options: drum. This helps to reduce creasing. The display shows the indicator •...
  • Page 19: Settings

    ENGLISH 8.9 Vloeibaar wasmiddel Touch the button repeatedly to set the required delay. The time increases by Press this button to adapt the cycle if you steps of 30 minutes up to 90' and from 2 use a liquid detergent. hours up to 20 h.
  • Page 20: Before First Use

    10. BEFORE FIRST USE 2. Open the water tap. During installation or before 3. Put 2 litre of water in the detergent first use you may observe compartment for washing phase. some water in the appliance. This activates the drain system.
  • Page 21 ENGLISH Detergent compartment for pre‐ wash phase. The marks MAX are the maxi‐ mum levels of the quantity of detergent (powder or liquid). When you set a programme with a stain, add detergent (powder or liquid). Detergent compartment for washing phase. The marks MAX are the maxi‐...
  • Page 22 11.7 Cycle time recalculation When you use the liquid detergent: After approximately 15 • Do not use gelatinous or minutes from the start of the thick liquid detergents. programme: • Do not put more liquid • The appliance adjusts then the maximum level.
  • Page 23 ENGLISH 11.13 Opening the Lid when 3. Press the button Start/Pauze again. The programme continues. the programme operates 11.11 Cancelling a running CAUTION! programme If the temperature and level of the water in the drum are 1. Press button Aan/Uit to cancel the too high, the lid lock programme and to deactivate the indicator...
  • Page 24: Hints And Tips

    When you activate the The lid lock indicator is on. The lid appliance again, the display stays locked. show the end of the last set You must drain the water to open the lid: programme. Turn the programme knob to set a 1.
  • Page 25 ENGLISH • Use less detergent if: – you are washing a small load, – the laundry is lightly soiled, – there is large amounts of foam during washing. • When using detergent tabs or pods, always put them inside the drum, not in the detergent dispenser.
  • Page 26: Care And Cleaning

    To find out the water hardness in your Use the correct quantity of water area, contact your local water authority. softener. Follow the instructions that you find on the packaging of the product. 13. CARE AND CLEANING Remove any foreign objects (such as...
  • Page 27 ENGLISH the drum. Perform a maintenance wash For a complete cleaning: regularly. To do this: 1. Clean the drum with special products • Remove all laundry from the drum. for stainless steel. • Select the cotton programme with the Always follow the highest temperature with a small instructions that you find on quantity of detergent.
  • Page 28 Proceed as follows to clean the pump: 13.10 Cleaning the inlet hose and the valve filter 13.11 Emergency drain 13.12 Frost precautions If the appliance cannot drain the water, If the appliance is installed in an area carry out the same procedure, described where the temperature can reach values in 'Cleaning the drain pump' paragraph.
  • Page 29: Troubleshooting

    ENGLISH 5. When the drain pump is empty, WARNING! install the inlet hose again. Make sure that the temperature is higher than 0 °C before you use the appliance again. The manufacturer is not responsible for damages caused by low temperatures. 14.
  • Page 30 • The programme was not finished properly or the appliance stopped too early. Switch the appliance off and on again. Internal fail. No com‐ • If the alarm code appears again, contact the Authorised Serv‐ munication between ice Centre.
  • Page 31: Consumption Values

    ENGLISH Problem Possible solution • Make sure that a washing programme that ends with water in tub, has not been selected. • Make sure that the washing programme is finished. You cannot open the • Set the drain or the spin programme if there is water in the appliance lid.
  • Page 32 The QR code on the energy label supplied with the appliance provides a web link to the information related to the performance of the appliance in the EU EPREL database. Keep the energy label for reference together with the user manual and all other documents provided with this appliance.
  • Page 33: Quick Guide

    ENGLISH 15.4 Common programmes These values are indicative only. Programme Litres h:mm °C Katoen 2.35 4:05 1400 95°C Katoen 1.75 3:50 1400 60°C Katoen 0.30 2:50 1400 20°C Synthetica 0.60 2:10 1200 40°C Fijne was 0.30 1:00 1200 30°C Wol/Zijde 0.20 1:05 1200...
  • Page 34 2. Set the desired options (1) by means Push the Aan/Uit button to turn the of the corresponding touch buttons. appliance off. To start the programme, touch the Start/Pauze (2) button. 3. The appliance starts. At the end of the programme, remove the laundry.
  • Page 35 ENGLISH Programmes Load Product description All fabrics, except woollens and very delicate 6 kg fabrics. Programme for spinning and draining Centrif./Pompen the water. 1) Washing programme. 2) Washing programme and waterproofing phase. 3) To reduce creasing, this cycle regulates the water temperature and performs a soft wash and spin phase.
  • Page 36 www.aeg.com/shop...

Table of Contents