MODEL # 2050SU/2050P
CUSTOMER SERVICE
SUPPORT@EARTHWAY.COM
ONE YEAR WARRANTY
EarthWay Products, Inc. warrants this product free of defects in original workmanship and materials for a period of one year to the
end user with the original purchase receipt. If a manufacturing non-conformance is found, EarthWay Products, Inc. at its discretion
will repair or replace the part(s)/product at no charge provided the failure is not the result of incorrect installation, mishandling,
misuse, tampering, or normal wear and tear as determined by EarthWay.
EarthWay at its discretion may require that the part(s) or product be returned along with the original purchase receipt for
examination and compliance with the terms of this warranty. Do not return any product without first receiving authorization from
EarthWay Products, Inc.
To seek remedy under this warranty, contact EarthWay Products, Inc. at support@earthway.com or write to EarthWay
Products, Inc. 1009 Maple Street, Bristol, IN 46507 and describe the nature of the manufacturing defect. SPECIFIC
LIMITATIONS: This warranty covers only the part(s) or product; any labor charges associated with repair or replacement of
non-conformances are specifically excluded. Due to the corrosive nature of most fertilizers and ice melt products, EarthWay
Products, Inc. makes no warranty against and specifically excludes part(s) or product degradation or failure due to corrosion or
its effects.
2050Series_M52194_July2021
|
www.EARTHWAY.com
80 lb Broadcast Spreader
with Side Spread Control
ASSEMBLY INSTRUCTIONS
SIDE SPREAD CONTROL
Patent U.S. 10,993,368
Your EarthWay spreader includes a patented
feature to prevent fertilizer from being spread
to the left side. To activate this feature, slide the lever
below the hopper to the back (if standing behind the
spreader) and position the left wheel 6"-12" from your
sidewalk or border. This will not waste fertilizer like
competitor designs that leave 7X the fertilizer inside the
wheels from blocking material leaving the impeller.
For assembly, flip up handle and tighten each wing nut to
hold handle in position
| 1009 Maple Street, Bristol, IN 46507
ASSEMBLY
PAGE 1