Table of Contents
Advertisement
Operation
Risk of fire due to overheated
food.
Unattended food can overheat and
ignite.
Do not leave the cooktop unattended
whilst it is being used.
Please note that the heating-up time
on induction cooktops is much
shorter than on conventional
cooktops.
28
Switching on the cooktop
Touch the sensor.
Further sensor controls will light up.
If no further entry is made, the
cooktop will switch itself off after a
few seconds for safety reasons.
Setting the power level
Permanent pan recognition is
activated as standard (see
"Programming"). When the cooktop is
switched on and you place a pan on
one of the cooking zones, all the
sensors for that cooking zone's
numerical keybank will light up.
Place a pan on the cooking zone you
want to use.
Touch the sensor control for the
desired power level on the respective
numerical keybank.
Switching off a cooking zone/
the cooktop
To switch off a cooking zone, touch
the 0 sensor for that cooking zone.
To switch off the cooktop and all the
cooking zones, touch the sensor.
Advertisement
Table of Contents
