2. Open the filling door.
As soon as K /W (DOOR/LIGHT) is illuminated green from the rear the
door can be opened (not when Program Saving is activated, also see
"Program Saving").
3. Remove the washing.
4. Turn the program selector to I (OFF).
5. After washing, pull out the washing detergent drawer slightly so that it
can dry out. Only lean the door against the washing machine so that
the latter can air out.
If Å (OVERDOSING) is illuminated from the rear, too much de-
3
tergent was used in the washing program which has just ended.
During the next wash, pay attention to the detergent manufacturer's
dosing information and to the load quantity!
Caution! If the washing machine is not used for a long time:
Close the water tap and disconnect the washing machine from the
electricity mains. (Anti-flood system Aqua Control with Aqua Alarm
does not function if the power supply is interrupted.)
Operating Instructions
27