Disclaimer OMCAN IS NOT RESPONSIBLE FOR ANY DAMAGES DUE TO WATER LEAKS. WARRANTY FOR WATER LEAKS IS VOID IF THE AMBIENT ROOM TEMPERATURE EXCEEDS 75°F AND 55% RELATIVE HUMIDITY, AND THE APPLIANCE DRAIN IS NOT CONNECTED DIRECTLY TO A FLOOR DRAIN.
If the package has suffered rough handling, bumps or damage (visible or concealed), please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be filled out within three days, from the delivery date shown in the shipping documents.
Si el paquete ha sufrido un manejo de poco cuidado, golpes o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro de las 24 horas, de modo que podamos iniciar una reclamación con la compañia.
Page 6
2 YEARS PARTS AND LABOUR / 5 YEARS PARTS ONLY ON COMPRESSOR WARRANTY Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule an Omcan authorized service technician to repair the equipment locally. Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not improper use.
In any case, for suitable recycling, we suggest disposing of the products separately (differentiated waste) according to the current norms. DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT! Technical Specifications Model RE-CN-0021-G-HC RE-CN-0041-G-HC RE-CN-0067-G-HC Net Volume 650 L / 23 cu.ft.
Installation IMPORTANT!!!PLEASE READ BEFORE INSTALLATION • If the unit has recently been transported. Please let unit stand still for a minimum of 24 hours before plugging it in. • Make sure that the unit drops down to desired temperature before loading the unit with product. •...
Installation 7. Reassemble the door so it is facing the opposite direction. 8. Reassemble the top panel and the lower louver. 9. The door is now reversed. Maintenance CLEANING THE CONDENSER COIL • For efficient operation, it is important that the condenser surface be kept free of dust, dirt, and lint. •...
Troubleshooting Before requesting any service on your unit, please check the following points. Please note that this guide serve only as a reference for solutions to common problems. SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION Compressor not running. Fuse blown or circuit breaker Replace fuse or reset circuit tripped.
Page 11
Troubleshooting Cabinet Temperature Is too warm. Thermostat set too warm. Set thermostat to lower Temperature. Blocking air flow. Re-arrange product to allow for Proper air flow. Make sure there Is at least four inches of clearance from evaporator. Excessive amount of warm product Allow adequate time for product to Placed in cabinet.
Controller Instructions Digital controller model: PJEZ for cooler Display and functions During normal operation, the controller displays the value of the probe set using parameter/4(=1 ambient probe, default, = 2 second probe, = 3 third probe).In addition, the display has LEDs that indicate the activation of the control functions (see Table 1), while the 3 buttons can be used to activate/deactivate some of the functions(see Table 2).
Page 13
Controller Instructions Table of Functions activated by the buttons - Models S, X, Y, C (Table 2) Button Normal Operation Start Up Pressing the Button Alone Pressed Together More than 3 sec: toggle ON/ Start/Stop ON/OFF continuous cycle Down More than 3 sec: start/stop Pressed For 1 sec.
Page 14
Controller Instructions • To display/set the values of the parameter displayed, press SET, then UP/DOWN and finally SET to confirm the changes (returning to the parameter menu). To save all the new values and exit the parameter menu, press SET for 3 s. To exit the menu without saving the changed values (exit by timeout) do not press any button for at least 60 s.
Page 16
Parts Breakdown Model RE-CN-0021-G-HC 51024 Item No. Description Position Item No. Description Position Item No. Description Position AG440 Cabinet for 51024 AG450 Back Grill for 51024 AG456 Bottom Right Hinge for 51024 AG441 Control Panel for 51024 AB977 Door Switch for 51024...
Page 17
Parts Breakdown Model RE-CN-0041-G-HC 51026...
Page 18
Parts Breakdown Model RE-CN-0041-G-HC 51026 Item No. Description Position Item No. Description Position Item No. Description Position AG548 Cabinet for 51026 AG554 Back Grill for 51026 AG457 Upper Right Hinge for 51026 AG549 Control Panel for 51026 26246 Caster with Brake for 51026 AG560 Right Glass Door for 51026 AF048...
Page 19
Parts Breakdown Model RE-CN-0067-G-HC 51028...
Page 20
Parts Breakdown Model RE-CN-0067-G-HC 51028 Item No. Description Position Item No. Description Position Item No. Description Position AG565 Cabinet for 51028 AB977 Door Switch for 51028 AG561 Gasket for 51028 AG566 Control Panel for 51028 AG571 Back Grill for 51028 AG457 Upper Right Hinge for 51028 AF060...
Warranty Registration Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at the perforation and then send to the address specified below. You can also register online by visiting: Merci d’avoir acheté...
Page 28
Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North American food service industry. Our success over these many years can be attributed to our commitment to strengthen and develop new and existing relationships with our valued customers and manufacturers.