IBM 3453-F7E Install Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

IBM Cloud Pak for Data system

Customer Install Guide

Connector Node

3453-F7E

Version 1.3

Note

Before using this information and the product it supports, read the information in

"Safety notices" on page 5, "Notices" on page 44, the IBM Systems Safety Notices

manual, G229-9054, and the IBM Environmental Notices and User Guide.

Customer Install Guide, Connector Node

Table of Contents

Summary of Contents for IBM 3453-F7E

Page 1 Note Before using this information and the product it supports, read the information in “Safety notices” on page 5, “Notices” on page 44, the IBM Systems Safety Notices manual, G229-9054, and the IBM Environmental Notices and User Guide. © Copyright IBM Corporation 2020, 2021.
Page 2 This edition applies to IBM Cloud Pak for Data System Components. Revised November 2021 © Copyright IBM Corporation 2020, 2021. US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp. © Copyright IBM Corporation 2020, 2021.
Page 3: Table Of Contents
Place the CMA onto the support bar and close the stop bracket....... 34 Cabling ........................35 Cable Straps ......................36 Assembly Notes ......................36 Electronic Emissions Notices ..................38 Regulatory and Compliance ..................43 Notices .......................... 44 Copyright License:......................47 © Copyright IBM Corporation 2020, 2021. Customer Install Guide, Connector Node...
Page 5: Safety
Avant d'installer ce produit, lisez les consignes de sécurité. Vor der Installation dieses Produkts die Sicherheitshinweise lesen. Prima di installare questo prodotto, leggere le Informazioni sulla Sicurezza. Les sikkerhetsinformasjonen (Safety Information) før du installerer dette produktet. © Copyright IBM Corporation 2020, 2021. Customer Install Guide, Connector Node...
Page 6: Safety Notices
Read any additional safety information that comes with your system or optional device before you install the device. D005 DANGER: When working on or around the system, observe the following precautions: © Copyright IBM Corporation 2020, 2021. Customer Install Guide, Connector Node...
Page 7 Electrical voltage and current from power, telephone, and communication cables are hazardous. To avoid a shock hazard: If IBM supplied the power cord(s), connect power to this unit only with the IBM provided power cord. Do not use the IBM provided power cord for any other product.
Page 8 (D005) C002 CAUTION: Only trained service personnel may replace this battery. The battery contains lithium. To avoid possible explosion, do not burn or charge the battery. © Copyright IBM Corporation 2020, 2021. Customer Install Guide, Connector Node...
Page 9 Use of the controls or adjustments or performance of procedures other than those specified herein might result in hazardous radiation exposure. (C026) IBM® servers can use I/O cards or features that are fiber-optic based and that utilize lasers or LEDs. Laser compliance IBM servers may be installed inside or outside of an IT equipment rack.
Page 10 DANGER: Observe the following precautions when working on or around your IT rack system: Heavy equipment–personal injury or equipment damage might result if mishandled. Always lower the leveling pads on the rack cabinet. © Copyright IBM Corporation 2020, 2021. Customer Install Guide, Connector Node...
Page 12 In addition, do not lean on rack-mounted devices and do not use them to stabilize your body position (for example, when working from a ladder). (L002) © Copyright IBM Corporation 2020, 2021. Customer Install Guide, Connector Node...
Page 14 (English translation: After providing the main product, if additional power cord is required, the cord is handled for repair/maintenance/mending purpose.) © Copyright IBM Corporation 2020, 2021. Customer Install Guide, Connector Node...
Page 15: Publications
Publications The following IBM documentation is available on the Safety and Regulatory CD included with your Cloud Pak for Data System rack & components: **** General Information Guides **** • Rack Safety Information • IBM Enterprise Slim Rack Safety Instructions •...
Page 16: Cloud Pak For Data System Connector Node Description
I/O. The chassis comes as a pretested building block loaded with software. The chassis can be installed in an IBM Cloud Pak rack or a customer supplied rack meeting the guidelines in the Customer Install Guide, Rack and System document included on the Safety and Regulatory CD shipped with your Cloud Pak for Data System components.
Page 17: Cloud Pak For Data System Connector Node Hardware Specifications
Connector Node, including dimensions, electrical power and cooling. . All component installation documents are available on the Safety and Regulatory CD that comes with your Cloud Pak for Data System components. 3453-F7E, Cloud Pak for Data System Connector Node [see Notes 1, 2] Table 1 Amperage...
Page 18: Operating Environment
[3] Short term temperature only for servers with SSDs [4] Unit must acclimate to data center environment before unboxing to prevent condensation. [5] PDUs do not have fresh air cooling and can function in 60C (140F) environments © Copyright IBM Corporation 2020, 2021. Customer Install Guide, Connector Node...
Page 19: Rack Requirements
Ensure that the rack in which you plan to install the system meets the space requirements outlined in the following figure: Figure 1: Top down view of installed chassis with 4-point horizontal mounting © Copyright IBM Corporation 2020, 2021. Customer Install Guide, Connector Node...
Page 20: Location In The Rack
25G switch, two compute chassis) that are designed to be integrated in the same rack with PDUs. The recommended component placement for the Connector Node is shown in Figure 2 below. Other configurations can be used if IBM Safety Notices translations Pub # G229-9054 rules are followed, and the lengths of the supplied cables are not exceeded.
Page 21: Connector Node Front And Rear View
Connector Node Front and Rear View SSD (8x) 32G Ports (2x) 32G Ports (2x) 100G Ports (2x) Figure 3: Connector Node front and rear view © Copyright IBM Corporation 2020, 2021. Customer Install Guide, Connector Node...
Page 22: Package Contents
– Two 100G Active Optical Cables – One Safety DVD – This document Note: KEEP ALL POWER CORDS AND SIGNAL CABLES WITH THE INSTALLED CHASSIS FOR USE BY IBM INSTALLERS. © Copyright IBM Corporation 2020, 2021. Customer Install Guide, Connector Node...
Page 23: Chassis Installation Procedure
The slide box kit includes the following parts. This kit comes with the enclosure. ▪ One right slide ▪ One left slide ▪ Two M6 screws © Copyright IBM Corporation 2020, 2021. Customer Install Guide, Connector Node...
Page 24: Install The Rear Mounting Bracket
Follow the steps to install each rail onto the flanges. Step 1 Fully slide the outer rail toward the rear of the rack. © Copyright IBM Corporation 2020, 2021. Customer Install Guide, Connector Node...
Page 25 Step 4 Push the rail backward until the pins are inserted into the corresponding holes and the rear latch rotates back to the closed position. Figure 5: Slide Installation © Copyright IBM Corporation 2020, 2021. Customer Install Guide, Connector Node...
Page 26: Install The Front Mounting Bracket
Step 3 Pull the entire rail forward until the pins protrude through the holes. Step 4 Release the front latch to lock the rail into position. Figure 7: Clip front latch in place © Copyright IBM Corporation 2020, 2021. Customer Install Guide, Connector Node...
Page 27: Install The Server Onto The Inner Rails
Ensure that the mounting studs are locked into position so the server is firmly secured. Caution: Ensure that two people are lifting the server together. Their hands must be positioned as illustrated. © Copyright IBM Corporation 2020, 2021. Customer Install Guide, Connector Node...
Page 28: Slide The Server Into The Rack
Slide the server into the rack. Step 1 Lift the locking levers on both sides of the rails. Step 2 Push the server all the way into the rack until it clicks into place. © Copyright IBM Corporation 2020, 2021. Customer Install Guide, Connector Node...
Page 29: Secure The Server Before You Move The Rack
Secure the server before you move the rack, or if you place the rack in a vibration-prone area. Open the latches in the front of the server, and then tighten the screws Figure 11: Secure the server © Copyright IBM Corporation 2020, 2021. Customer Install Guide, Connector Node...
Page 30: Server Removal (Optional)
Step 1 Press the blue touch points at the front of both the inner rails. Step 2 Carefully rotate the server upward. Step 3 Lift the server out of the rails Figure 12: Remove the server © Copyright IBM Corporation 2020, 2021. Customer Install Guide, Connector Node...
Page 31: Install The Cma Onto The Rails
For these reasons and more, the cable management arms are required. Should you choose not to install the management arms, IBM will not be able to install or support your Cloud Pak for Data System. Should they be removed after installation, you will void your system warranty and onsite service will not be provided.
Page 32: Cma Orientation
Step 1 Place the pin on the CMA support bar down into the slot in the rear end of the rail. Step 2 Rotate the other end of the support bar toward the rail on the opposite side. Figure 14: CMA support bar assembly (left side) © Copyright IBM Corporation 2020, 2021. Customer Install Guide, Connector Node...
Page 33: Connect The Cma Mounting Brackets To The Rail
Step 1 Connect the inner mounting bracket on the CMA to the inner mounting bracket on the rear of the rail. Step 2 Connect the outer mounting bracket on the CMA to the outer mounting bracket on the rear of the rail. © Copyright IBM Corporation 2020, 2021. Customer Install Guide, Connector Node...
Page 34: Place The Cma Onto The Support Bar And Close The Stop Bracket
To rotate the CMA on or off the support bar, you can press down the stop bracket and rotate it to the open or closed position. © Copyright IBM Corporation 2020, 2021. Customer Install Guide, Connector Node...
Page 35: Cabling
Attach the power cords and other cables to the rear of the server. Open the cable brackets on the CMA, route the cables, and then close the cable brackets. Fig 18: Cable routing © Copyright IBM Corporation 2020, 2021. Customer Install Guide, Connector Node...
Page 36: Cable Straps
ALL OPEN RACK BAYS REQUIRE FILLERS TO PREVENT HOT AIR FROM RECIRCULATING TO THE FRONT OF THE RACK AND INTO THE COLD AIR INLETS. DO NOT BLOCK ANY INLET OR EXHAUST DUCTS, VENTS OR PORTS © Copyright IBM Corporation 2020, 2021. Customer Install Guide, Connector Node...
Page 37 KEEP ALL POWER CORDS, SIGNAL CABLES AND TRANSCEIVERS WITH THE INSTALLED CHASSIS FOR USE BY IBM INSTALLERS. DO NOT POWER-ON THIS CHASSIS. POWER ON WILL BE DONE BY YOUR IBM INSTALLATION TEAM. © Copyright IBM Corporation 2020, 2021. Customer Install Guide, Connector Node...
Page 38: Electronic Emissions Notices
Properly shielded and grounded cables and connectors must be used in order to meet FCC emission limits. Proper cables and connectors are available from IBM-authorized dealers. IBM is not responsible for any radio or television interference caused by using other than recommended cables and connectors or by unauthorized changes or modifications to this equipment.
Page 39 EU-Mitgliedsstaatenund hält die Grenzwerte der EN 55032 Klasse A ein. Um dieses sicherzustellen, sind die Geräte wie in den Handbüchern beschrieben zu installieren und zu betreiben. Des Weiteren dürfen auch nur von der IBM empfohlene Kabel angeschlossen werden. IBM übernimmt keine Verantwortung für die Einhaltung der Schutzanforderungen, wenn das Produkt ohne Zustimmung von IBM verändert bzw.
Page 40 Erweiterungskomponenten von Fremdherstellern ohne Empfehlung von IBM gesteckt/eingebaut werden. EN 55032 Klasse A Geräte müssen mit folgendem Warnhinweis versehen werden: "Warnung: Dieses ist eine Einrichtung der Klasse A. Diese Einrichtung kann im Wohnbereich Funk-Störungen verursachen; in diesem Fall kann vom Betreiber verlangt werden, angemessene Maßnahmen zu ergreifen und dafür aufzukommen."...
Page 41 이 기기는 업무용 환경에서 사용할 목적으로 적합성평가를 받은 기기로서 가정용 환경에서 사용하는 경우 전파간섭의 우려가 있습니다. People's Republic of China Notice 警告此为 A 级产品，在生活环境中，该产品可能会造成无线电干扰。在这种情况下，可能需要用户对其干扰采取切实可行的措施。 © Copyright IBM Corporation 2020, 2021. Customer Install Guide, Connector Node...
Page 42 This product may cause interference if used in residential areas. Such use must be avoided unless the user takes special measures to reduce electromagnetic emissions to prevent interference to the reception of radio and television broadcasts. © Copyright IBM Corporation 2020, 2021. Customer Install Guide, Connector Node...
Page 44: Notices
Consult your local IBM representative for information on the products and services currently available in your area. Any reference to an IBM product, program, or service is not intended to state or imply that only that IBM product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any IBM intellectual property right may be used instead.
Page 45 Web sites. The materials at those Web sites are not part of the materials for this IBM product and use of those Web sites is at your own risk. IBM may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you.
Page 46 All of these names are fictitious and any similarity to the names and addresses used by an actual business enterprise is entirely coincidental. © Copyright IBM Corporation 2020, 2021. Customer Install Guide, Connector Node...
Page 47: Copyright License
You may copy, modify, and distribute these sample programs in any form without payment to IBM, for the purposes of developing, using, marketing or distributing application programs conforming to the application programming interface for the operating platform for which the sample programs are written.
Page 48 IBM, the IBM logo, ibm.com® and Netezza® are trademarks or registered trademarks of International Business Machines Corporation in the United States, other countries, or both. If these and other IBM trademarked terms are marked on their first occurrence in this information with a trademark symbol (® or ™), these symbols indicate U.S.
Page 49 IBM business partner, or your authorized remarketer. When you send comments to IBM, you grant IBM a nonexclusive right to use or distribute your comments in any way it believes appropriate without incurring any obligation to you. IBM or any other organizations will only use the personal information that you supply to contact you about the issues that you state on this form.

IBM 3453-F7E Install Manual

Quick Links

Related Manuals for IBM 3453-F7E

Summary of Contents for IBM 3453-F7E

Table of Contents