Page 1
Contents subject to change without prior notice. GENERAL DESCRIPTION Toshiba’s 2.5" Hard Disk Drive 9.5mm GAS series, HDDXXXX, comprise a series of fast, high-capacity 2.5" Winchester disk drives which comply with ATA-5 standards and require only a simple adapter board for interfacing to standard IDE cables.
Page 2
DRIVE CONFIGURATION Toshiba’s 2.5" hard disk drives can be configured as either master or slave units. Master configuration is used for all single drive applications, and master or slave configuration (only one of each per port) is used for two drive applications. Use the information in the following table before setting M/S drive.
Page 3
FIGURE 2 – MOUNTING HOLE LOCATIONS INSTALLATION INSTRUCTIONS Note: Toshiba’s 2.5” HDDs are primarily used in notebook devices. Installation into a notebook varies depending on the system manufacturer. Toshiba’s 2.5” drives that are installed into a desktop PC require a 3.5” installation kit.
Page 4
Note: Symbol (–) in front of signal indicates negative logic. TECHNICAL SUPPORT Should you require technical support, contact your computer distributor. If your distributor is unable to answer your questions, have them call Toshiba Storage Device Division Technical Support, on your behalf. TOSHIBA - STORAGE DEVICE DIVISON TECHNICAL SUPPORT - 503/615-4364 toshibatech@teleplan.com...