Thank you for purchasing equipment from Dakota Micro, Inc. Always read the manual prior to operating this equipment. Also, please follow all safety signs and precautions. See the Dakota Micro, Inc. website for installation training videos at www.dakotamicro.com. Author: CNR...
WARNING: Dakota Micro, Inc. is not responsible for any damages caused to your monitor, or yourself, due to the improper installation or use of a suction cup monitor mount, whether it be product sold by DM or product purchased from another source.
If you would like to hardwire your power supply, please contact your local AgCam® dealer for available hardwire power adaptors (PN: DM-HDWRE is included in four-camera kits only) 2. Dakota Micro hardwire power adaptors have a maximum circuit capability of 5 amp. C. Fuses 1.
H9Q/H9QD User Manual B. Monitor Operations Headphone Jack Output for audio (disabled) Full Screen Will show cameras 1/2/3/4 each time pressed. Will show cameras 1/2 and cameras 3/4 each time Duplex Screen pressed. First press will display all four (4) cameras connected. Second press initiates auto.
H9Q/H9QD User Manual C. Remote Operations DVR Remote POWER ON (few seconds delay)/OFF Switches between video channels Navigation Arrows Navigation Arrows Navigation Arrows Navigation Arrows Next File/Skip Standard Remote POWER ON (give it a few seconds) / OFF Switches between video channels Displays Menu Navigation Arrows Navigation Arrows...
H9Q/H9QD User Manual MENU SETTINGS A. Monitor Menu Settings 1. Press the MENU key on the face of monitor or remote. 2. Use the AV key on the monitor (up and down arrows on remote) to select an item under each section. Selected menu items turn green.
Page 8
H9Q/H9QD User Manual SETTING MENU LANGUAGE: Adjusts menu language AHD1 TRIGGER DELAY: Turns ON/OFF Trigger Delay for Camera 1 AHD2 TRIGGER DELAY: Turns ON/OFF Trigger Delay for Camera 2 AHD3 TRIGGER DELAY: Turns ON/OFF Trigger Delay for Camera 3 AHD4 TRIGGER DELAY: Turns ON/OFF Trigger Delay for Camera 4 BLUE: Allows for selection of BLUE or BLACK screen...
Page 9
H9Q/H9QD User Manual REC SET (RECORD MENU) REC MODE: FILESIZE: Adjust the length of the recording in the file. (5Min, 10Min,15Min, 20Min, 30Min, 45Min) Audio: Record Audio On/Off (Separate audio recording device required) REC CHN CFG: Access Record Channel Configuration Menu Enable: Channel Recording On/Off (Is ON by Default)
WARNINGS • When selecting a camera system from Dakota Micro, be sure to utilize the appropriate system for your use. AgCam and EnduraCam cameras are designed for high impact, moisture, vibration, and a variety of other rough conditions. OverView cameras and kit components are designed for light use, low vibration, and low moisture. OverView equipment is not warranted when used in situations outside of the above-mentioned parameters.
10. Product returned with unconfirmed problems will be assessed a $60 evaluation fee per unit 11. Return shipping costs will be borne by the party at fault; in other words, if Dakota Micro determines that the defective product was covered under warranty, Dakota Micro pays the shipping charges. If Dakota Micro determines that it was the customers fault, the customer will pay shipping charges.
Dakota Micro to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims. In no event shall Dakota Micro be liable or in any way responsible for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than Dakota Micro.