Page 1
OWNER’S MANUAL Safety and Reference LED TV* * LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your TV and retain it for future reference. 65SK9500PUA 55SK8000AUB 49UK7700AUB 70UK6550PUA 55UK6300PUE 43UK6300BUB 43UK6250PUB 55SK9500PUA...
By using this product, you agree that all disputes between you and LG arising out of or relating in any way to this product (including but not limited to warranty disputes) shall be resolved exclusively through binding arbitration on an individual basis. The terms of the arbitration agreement (including details on the procedure for resolving disputes) is available at www.lg.com/us/arbitration (USA) or www.lg.ca/arbitration...
Page 3
Warning! Safety Instructions • Ventilation - Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. - Do not install the product on a carpet or cushion. - Do not block or cover the product with cloth or other materials while unit is plugged in.
Page 4
• Use only an authorized attachments / accessories approved by LG Electronics. Otherwise, this may result in fire, electric shock, malfunction, or product damage. • Never disassemble the AC adapter or power cord. This may result in fire or electric shock.
Preparing Optional Extras • When the TV is turned on for the first time after being shipped Optional extras can be changed or modified for quality improvement from the factory, initialization of the TV may take approximately without any notification. Contact your dealer for buying these items. one minute.
• Use at least two people to move a large TV. 55/65SK95* • When transporting the TV by hand, hold the TV as shown in the 55/65SK90* following illustration. 55/65SK85* 65SK80* 75SK80* Model 65UK77* 70/75/86UK65* 65UK75* 75UK62* 65UK65* 65UK63* 60/65UK62* •...
Detailed instructions will be included with the wall mount. • Make sure that the screws are fastened tightly. (If they We recommend that you use an LG brand wall mount. The LG wall are not fastened securely enough, the TV may tilt forward mount is easy to adjust or to connect the cables.
Connections You can connect various external devices to the TV. For more information on external device’s connection, refer to the manual provided with each device. Antenna/Cable Connect an antenna, cable, or cable box to watch TV while referring to the following. The illustrations may differ from the actual items and an RF cable is optional.
To obtain the RS-232C external control setup information, please - Off : Support 4K @ 60 Hz 8 bit (4:2:0) visit www.lg.com. Download and read the manual, (Depending upon If the device connected to Input Port also supports ULTRA HD Deep model).
Using Remote Control * To use the button, press and hold for more than 3 seconds. (POWER) Turns the TV on or off. (Depending upon model) Returns to the last TV channel. Activates or deactivates the subtitles. The descriptions in this manual are based on the buttons on the remote (Q.
Page 11
Using Magic Remote Control * To use the button, press and hold for more than 3 seconds. (POWER) Turns the TV on or off. (Depending upon model) You can turn your set-top box on or off by adding the set- top box to the universal remote control for your TV.
Troubleshooting Registering Magic Remote Control How to register the Magic Remote Control Cannot control the TV with the remote control. To use the Magic Remote, first pair it with your TV. • Check if anything such as tape has been placed over the receiver. 1 Put batteries into the Magic Remote and turn the TV on.
Page 13
Generated Sound • Cracking noise A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required. • Electrical circuit humming/panel buzzing A low level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate a product.
Specifications Product specifications may be changed without prior notice due to upgrade of product functions. Estimated yearly energy consumption indicated on the FTC label is measured in accordance with the Test Procedures for Television Sets (USA only). The actual energy consumption depends on the usage environment (The content watched, TV settings, etc.). (Depending upon country) Broadcasting Specifications Television system...
Page 15
(Only LK61*) Wireless module (LGSWFAC81) Specifications Wireless LAN (IEEE 802.11a/b/g/n/ac) Frequency Range Output Power (Max.) 2400 to 2483.5 MHz 20 dBm 5150 to 5725 MHz 15 dBm 5725 to 5850 MHz 14.5 dBm As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional frequency table.
This equipment generates, uses LG Electronics will also provide open source code to you on CD-ROM and can radiate radio frequency energy and, if not installed and used...
FCC RF Radiation Exposure RSS-247 Requirement Statement (For Canada) [For product having the wireless function using 5 GHz frequency bands] [For having wireless function (WLAN, Bluetooth,...)] • The device for operation in the band 5150–5250 MHz is only for This equipment complies with FCC radiation exposure limits set forth for indoor use to reduce the potential for harmful interference to an uncontrolled environment.
Page 18
WARNING! Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as: • Using cabinets or stands recommended by the manufacturer of the television set.
CHILD SAFETY: PROPER TELEVISION PLACEMENT MATTERS THE CONSUMER ELECTRONICS INDUSTRY CARES • Manufacturers, retailers and the rest of the consumer electronics industry are committed to making home entertainment safe and enjoyable. • As you enjoy your television, please note that all televisions – new and old- must be supported on proper stands or installed according to the manufacturer’s recommendations.
Page 20
Declaration of Conformity Trade Name: LG LG Customer Information Center Responsible Party: LG Electronics Inc. For inquires or comments, visit www.lg.com or Address: 1000 Sylvan Ave. Englewood Cliffs NJ 07632 call; U.S.A 1-800-243-0000 USA, Consumer User TEL: 201-266-2534 1-888-865-3026 USA, Commercial User...
OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.com...
KEY CODES KEY CODES • This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) CH +, PR + R/C Button List R/C Button CH -, PR - R/C Button Exit R/C Button Volume + R/C Button PIP(AD) R/C Button...
Page 23
(TV) (PC) • LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial converter RS-232C IN which is not made nor provided by LG. (CONTROL & SERVICE) (PC) (TV) • It can be purchased from computer stores that carry accessories for IT support professionals.
Page 24
EXTERNAL CONTROL DEVICE SETUP (TV) (PC) (TV) (PC) Phone jack Type RS-232C IN • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and (CONTROL & SERVICE) (PC) (TV) the TV, which is specified in the manual. RS-232C IN (CONTROL &...
EXTERNAL CONTROL DEVICE SETUP Communication Parameters • Baud rate : 9600 bps (UART) • Stop bit : 1 bit • Data length : 8 bits • Communication code : ASCII code • Parity : None • Use a crossed (reverse) cable. Command reference list (Depending on model) DATA...
Page 26
EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99.
Page 27
EXTERNAL CONTROL DEVICE SETUP * Commands may work differently depending on model and signal. 01. Power (Command: k a) Ack [d][ ][Set ID][ ][OK/NG][Data][x] ► To control Power *On or Off of the set. * In case of video mute on only, TV will display On Transmission[k][a][ ][Set ID][ ][Data][Cr] Screen Display(OSD).
Page 28
EXTERNAL CONTROL DEVICE SETUP 08. Color/Colour (Command: k i) 13. Treble (Command: k r) ► To adjust the screen Color(Colour). ► To adjust treble. You can also adjust colour in the PICTURE menu. You can also adjust in the AUDIO menu. Transmission [k][i][ ][Set ID][ ][Data][Cr] Transmission [k][r][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64...
Page 29
EXTERNAL CONTROL DEVICE SETUP 18. Equalizer (Command : j v) * Analog Antenna/Cable ► Adjust EQ of the set. [Data 00][Data 01] Channel Data Transmission [j][v][ ][Set ID][ ][Data][Cr] Data 00 : High byte channel data Data 01 : Low byte channel data - 00 00 ~ 00 C7 (Decimal : 0 ~ 199) Data 02 : Input Source (Analog) - 00 : Antenna TV (ATV)
Page 30
EXTERNAL CONTROL DEVICE SETUP * Analog Antenna/Cable 2. Tune to the digital antenna (ATSC) channel 30-3. Set ID = All = 00 Data 00 : Physical Channel Number Data 00 = Don’t know Physical = 00 - Antenna (ATV) : 02~45 (Decimal: 2 ~ 69) Data 01 &...
Page 31
11 11 EXTERNAL CONTROL DEVICE SETUP 2. Tune to the BS (ISDB-BS) channel 30. 24. Input select (Command: x b) Set ID = All = 00 (Main Picture Input) Data 00 = Don’t know Physical = 00 ► To select input source for main picture. Data 01 &...
Page 32
EXTERNAL CONTROL DEVICE SETUP * [Data 02], [Data 03] functions depend on model 3) When [Data 00] is 06, 07 and signal. 00 : Off 01 : On * If [Data 00] is 00 (3D On), [Data 03] has no meaning.
Page 34
Please read this manual carefully before operating your set and retain it for future reference. ESPAÑOL (1802-REV01) www.lg.com Guía Rápida de Configuración Printed in Korea Lea atentamente este manual antes de poner en marcha el equipo y consérvelo para futuras consultas.
Page 35
ENGLISH Easy TV Connect Guide (Animation) ESPAÑOL Guía Rápida de Conexión del televisor (Sólo en Inglés) FRANÇAIS Guide simplifié pour la connexion du téléviseur (Offert en anglais seulement) : mm (inches / pulgadas / po) : kg (lbs / libras / lb) 216.4...
Connect via WPS PIN Advanced Wi-Fi Settings Accessibility Accessibility 4 The device automatically tries to connect to the network available (wired network first). When you select the Wi-Fi Connection, the network list available is displayed. Choose the www.lg.com network you wish to use.
Troubleshooting Network Problems (Home) button on the remote to 1 Press the Follow the instructions below that match to your network status. (Settings) access the Home menu. Point the Wheel (OK) icon and select by pressing the Check the TV or the AP (Router). button on the remote.
1 Check that Wi-Fi is enabled on your smartphone. To use SmartShare, both devices must on the same local network. 2 Install/run the app for sharing content on your smartphone (It's called LG TV Plus on LG phones). 3 Enable your smartphone to share content files with other devices.
Page 39
1 Miracast should be set to "ON" on your portable device. 2 When your TV is detected, select the device on your portable device. When connection is completed, the device screen appears on the TV screen. Please call LG Customer Service if you experience any problems.