Related Manuals for LG 72WS70MS-B
Summary of Contents for LG 72WS70MS-B
- Page 1 USER GUIDE LG Digital Signage (MONITOR SIGNAGE) Please read this manual carefully before operating your set and retain it for future reference. webOS 3.0 www.lg.com...
-
Page 2: Table Of Contents
How to Use copyright notices are available for download. Follow the steps below if you encounter LG Electronics will also provide open issues with your security certificate while source code to you on CD-ROM for a attempting to access. -
Page 3: User Settings
NOTE The software-related contents may be changed without prior notice due to upgrade of the product functions. Some features described in the User Guide may not be supported in certain models. SNMP 2.0 is supported. USER SETTINGS Main Menu Settings Picture Settings To Select Picture Mode Picture... - Page 4 To fine-tune the picture mode Picture Picture Mode Settings Customize SETTINGS / Backlight/OLED LIGHT: adjusts the brightness of the screen by controlling the LCD backlight. The closer the value is to 100, the brighter the screen is. Contrast: adjusts the difference between the light and dark areas of the picture. The closer the value is to 100, the greater the difference is.
- Page 5 Picture Options: customizes the picture options. – Noise Reduction: Removes irregularly generated tiny dots for a clear picture. MPEG Noise Reduction: Reduces the noise produced while creating digital video signals. – Black Level: Adjusts the black level of the picture to correct the brightness and contrast of the picture. –...
- Page 6 To use the Energy Saving function Picture Energy Saving SETTINGS / Reduces power consumption by adjusting peak screen brightness. Auto: adjusts the brightness of the monitor according to ambient light. (This feature is available only with certain models.) Off: disables the Energy Saving mode. Minimum/Medium/Maximum: uses the Energy Saving according to the Energy Saving level specified for your monitor.
-
Page 7: Sound Settings
Sound Settings Only applies to certain models. To select a Sound Mode Sound Sound Mode SETTINGS / The best sound quality will be selected automatically depending on the video type currently being watched. Standard: this sound mode works well for content of all types. Cinema: optimizes sound for watching movies. - Page 8 Some recently connected devices may automatically attempt to reconnect to the Signage monitor when it is turned on. It is recommended that you set LG audio devices that support LG Sound Sync to LG TV mode or LG Sound Sync mode before connecting.
-
Page 9: Network Settings
Network Settings To Set a Signage Monitor Name Network Signage Name SETTINGS / You can set a name for Signage Monitor that will be used on the network by using the on-screen keyboard. To Set Your Wired Network Network Wired Connection (Ethernet) SETTINGS / Connecting to a wired network: Connect your monitor to a local area network (LAN) via the LAN port, and configure the network settings. - Page 10 For details, contact your ISP. LG is not responsible for any malfunction of the display and/or the Internet connection feature due to communication errors/malfunctions associated with your Internet connection, or other connected equipment.
-
Page 11: General Settings
General Settings To configure the language General Menu Language SETTINGS / Select one of the languages on the menu displayed on the screen. Menu Language: sets a language for Signage. Setting up the keyboard language General Keyboard Languages SETTINGS / Select the language you wish to show on the keyboard. - Page 12 Configuring Set ID General Set ID SETTINGS / Set ID (1 to 1000): Assigns a unique Set ID number to each product when several products are connected for display. Assign numbers ranging from 1 to 1000 and exit the option. You can control each product separately by using the Set ID you assigned to each product.
- Page 13 Configuring the Dual-View Screen [For double-sided flat OLED models only] General Dual-View Screen Setting SETTINGS / Front Screen Name: Sets the name of the front screen. Back Screen Name: Sets the name of the back screen. Screen Swap: Swaps the images on the front and back side of the screens. Screen Mirroring: Copies the image of the current screen to the opposite screen.
-
Page 14: Entertainment
ENTERTAINMENT Using Multimedia Features Connecting USB/SD Storage Devices Connect a USB storage device such as a USB flash memory, SD storage devices or an external hard drive to the display and use multimedia features. CAUTION Do not turn the monitor off or remove the USB storage device while Photo & Video or Music is playing. Back up files you have saved on a USB storage device frequently, as loss or damage to the files may be not covered by the warranty. - Page 15 Tips for using USB/SD storage devices Only a USB storage device can be recognized. A USB device does not work effectively when it is connected via a USB hub. A USB storage device using an automatic recognition program may not be recognized. A USB storage device using its own driver may not be recognized.
-
Page 16: Photo & Video
Photo & Video The photo feature is not supported in OLED models. Supported Photo & Video Files Supported External Subtitle Format *.smi, *.srt, *.sub (MicroDVD, SubViewer 1.0/2.0), *.ass, *.ssa, *.txt (TMPlayer), *.psb (PowerDivX), *.dcs (DLP Cinema) NOTE Subtitles are not supported in certain models. Embedded subtitles are not supported. - Page 17 Maximum data transfer rate Full HD video H.264 1920 x 1080@60P BP/MP/HP@L4.2 40 Mbps HEVC 1920 x 1080@60P MP@L4.1, Main10 Profile@L4.1 40 Mbps Ultra HD [Applies only to Ultra HD models] H.264 1920 x 1080@60P 4096 x 2160@30P BP/MP/HP@L5.1 50 Mbps HEVC 4096 x 2160@60P MP@L5.1, Main10 Profile@L5.1 50 Mbps Supported Photo File File Format...
-
Page 18: Viewing Photos And Videos
[For Ultra HD models only] Ultra HD image: 3840 X 2160 Some HEVC-encoded Ultra HD videos other than the content officially provided by LG Electronics may not be played. Some codecs can be used after upgrading software. -
Page 19: Scheduled Playing
Scheduled Playing Only applies to certain models. You can schedule your selected content to play at a certain time. (Scheduled playing is available with external inputs.) HOME / Select your desired storage device. Enter the folder that contains the file you wish to schedule. Click the NEW SCHEDULED PLAYING button in the upper right. -
Page 20: Music
Music Supported Music Files File Format Item Information .mp3 Bit rate 32 Kbps to 320 Kbps Sample freq. 16 KHz to 48 KHz Support MPEG1, MPEG2 Channels Mono, Stereo .wav Bit rate Sample freq. 8 kHz to 48 kHz Support Channels Mono, Stereo .ogg... -
Page 21: Supersign Contents
SuperSign Contents Plays stored files using the Export option in SuperSign Editor. To play back the stored files using the Export option HOME / Only contents distributed by SuperSign Manager are displayed and selectable. If there is a USB/SD storage device connected, the image on the USB/SD device is outputted additionally. -
Page 22: Local Contents Scheduler
Local Contents Scheduler Only applies to certain models. The recommended resolution for scheduled photo playback is 4096 x 2160 or below. Setting a Scheduled Playing You can create a scheduled playing using the Local Contents Scheduler and the Photo & Video app. Scheduled Playing with Photo &... -
Page 23: Screen Share
Run the Intel WiDi ( ) program on your laptop. Any nearby LG Signages supporting WiDi are detected. In the list of detected displays, select a Signage to connect to and then, click Connect. Enter the 8-digit PIN number (a) displayed on the Signage in the input field of your laptop (b) and click Continue. -
Page 24: Group Manager
Group Manager Only applies to certain models. Using this template-based content editing program, you can produce, manage and play content. There are three modes: Master, Slave and StandAlone. The program can be used to distribute and play schedules between the Master and Slave. - Page 25 NOTE If you use a mobile device, you need to go through an authorization process using a PIN code. The default PIN code is ‘000000’. When using a PC, use the full screen (F11) feature in 1920 x 1080 (Full HD) resolution to view the same screen as the monitor.
-
Page 26: Leveler Tool
Leveler Tool Only applies to certain models. You can check whether the product is horizontally and vertically level when installing the product outdoors in an enclosure. Accessing the Leveler Tool HOME / You can check whether the product is horizontally and vertically level. Exiting the Leveler Tool Exit the Leveler Tool by pressing the EXIT key on your remote control. -
Page 27: Control Manager
Control Manager Only applies to certain models. You can control and check the status of the display through web browser. This function is available on PC and mobile device. CAUTION Supported resolutions (this program is optimized for the following resolutions): –... -
Page 28: How To Use
How to Use On a PC Enter ‘https://Product IP address:3737’ in the browser's address bar to access the Control Manager login page. Enter the password in the Password window (The default password is ‘000000’). Click the Login button after entering the password to access the Dashboard. Click the face-shaped image to access the User Menu (Change Password, Logout). -
Page 29: Follow The Steps Below If You Encounter
Follow the steps below if you encounter issues with your security certificate while attempting to access. On Chrome Click ADVANCED Click Proceed to product IP address (unsafe) - Page 30 On FireFox Click Advanced Click Add Exception... Click Confirm Security Exception...
- Page 31 On Internet Explorer Click Continue to this website (not recommended). *The text of the links and buttons may differ depending on the OS (Operating System) or language settings used.
-
Page 32: Multi-Screen
Multi-Screen Changing Screen Input Press the button on the top right of each split Only applies to certain models. This feature allows you to view multiple external screen to select the desired input. inputs and videos on a single screen. Accessing Multi-Screen NOTE HOME /... -
Page 33: Picture Id Settings
PICTURE ID Settings NOTE Only applies to certain models. If PICTURE ID is set to 2, only the upper PICTURE ID is used to change the settings of a right monitor, which has a Set ID of 2, can be specific set (display) using a single IR receiver for controlled by IR signals. -
Page 34: Ir Codes
IR CODES All models do not support the HDMI/USB function. Some key codes may not be supported depending on the model. Code (Hex) Function Remarks Remote control button (POWER) MONITOR ON Remote control button MONITOR OFF Remote control button Energy Saving Remote control button INPUT Remote control button... - Page 35 Code (Hex) Function Remarks TILE Remote control button EXIT Remote control button PICTURE ID ON (RED) Remote control button PICTURE ID OFF (GREEN) Remote control button YELLOW Remote control Button BLUE Remote control button Remote control button Remote control button Remote control button Remote control button Remote control button...
-
Page 36: To Control Multiple Products
TO CONTROL MULTIPLE PRODUCTS Only applies to certain models. Use this method to connect several products to a single PC. You can control several products at a time by connecting them to a single PC. In the Option menu, the Set ID must be between 1 and 1000 without being duplicated. Connecting the Cable The image may be different according to the model. -
Page 37: Communication Parameter
Communication Parameter NOTE When using three-wire connections (non- Baud Rate: 9600 BPS standard), an IR daisy chain cannot be used. Data Length: 8 bit Be sure to only use the provided gender to Parity Bit: None connect properly. Stop Bit: 1 bit When monitors connected via Daisy Chain (that Flow Control: None controls multiple monitors) are turned off and... -
Page 38: Command Reference List
Command Reference List COMMAND DATA (Hexadecimal) Power 00 to 01 Select input See Select Input Aspect Ratio See Aspect Ratio Energy Saving See Energy Saving Picture Mode See Picture Mode Contrast 00 to 64 Brightness 00 to 64 Sharpness 00 to 32 Color 00 to 64 Tint... - Page 39 COMMAND DATA (Hexadecimal) Screen off 00 to 01 Tile Mode 00 to FF Check Tile Mode Tile ID See Tile ID Natural Mode 00 to 01 DPM Select 00 to 07 Remote Control/Local Key Lock 00 to 01 Power On Delay 00 to FA Fail Over Select 00 to 02...
- Page 40 COMMAND DATA (Hexadecimal) n, 89 Aspect Ratio(Rotation) 00 to 01 Easy Brightness Control Mode 00 to 01 Easy Brightness Control Schedule See Easy Brightness Control Schedule MultiScreen Mode & Input See MultiScreen Mode & Input Aspect Ratio(MultiScreen) See Aspect Ratio(MultiScreen) Screen Mute(MultiScreen) See Screen Mute(MultiScreen) n, 0d...
-
Page 41: Transmission/Reception Protocol
Transmission/Reception Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] * [Command1]: identifies between the factory setting and the user setting modes. * [Command2]: controls monitor sets. * [Set ID]: Used for selecting a set you want to control. A unique Set ID can be assigned to each set ranging from 1 to 1000(01H~3E8H) under Settings in the OSD menu. - Page 42 01. Power (Command: k a) 03. Aspect Ratio (Command: k c) Controls the power on/off of the set. Adjusts the aspect ratio. Transmission Transmission [k][c][ ][Set ID][ ][Data][Cr] [k][a][ ][Set ID][ ][Data][Cr] Data 01: 4:3 Data 00: Off 02: 16:9 01: On 04: Zoom Acknowledgement...
- Page 43 05. Picture Mode (Command: d x) 08. Sharpness (Command: k k) Selects a picture mode. Adjusts the screen sharpness. Transmission Transmission [d][x][ ][Set ID][ ][Data][Cr] [k][k][ ][Set ID][ ][Data][Cr] Data 00: Vivid Data 00 to 32: Sharpness 0 to 50 Acknowledgement 01: Standard [k][ ][Set ID][ ][OK/NG][Data][x]...
- Page 44 12. Balance (Command: k t) Transmission Adjusts the sound balance. [k][f ][ ][Set ID][ ][Data][Cr] Transmission Data 00 to 64: Volume 0 to 100 [k][t][ ][Set ID][ ][Data][Cr] Acknowledgement Data 00 to 64: left 50 to right 50 [f ][ ][Set ID][ ][OK/NG][Data][x] Acknowledgement * It may not be supported depending on the model.
- Page 45 18. Off Time Schedule (Command: f c) 20. Off Timer (Repeat/Time) (Command: f e) Enables/disables the Off Time Schedule. Configures Off Timer (Repeat/Time) settings. Transmission Transmission [f ][c][ ][Set ID][ ][Data][Cr] [f ][e][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] Data 00: Off Data1 01: On 1.
- Page 46 21. On timer (Repeat/Time) (Command: f d) 22. On Timer Input (Command: f u) Configures On Timer (Repeat/Time) settings. Select an external input for the current On Time setting and Transmission add a new schedule. Transmission [f ][d][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] [f ][u][ ][Set ID][ ][Data1][Cr] Data1 [f ][u][ ][Set ID][ ][Data1][][Data2][Cr]...
- Page 47 23. No Signal Power Off (15Min) (Command: f g) 25. Language (Command: f i) Sets the monitor to enter Automatic Standby mode if there is Sets the OSD language. no signal for 15 minutes. Transmission Transmission [f ][i][ ][Set ID][ ][Data][Cr] [f ][g][ ][Set ID][ ][Data][Cr] Data 00: Czech...
- Page 48 26. Reset (Command: f k) 29. Time Elapsed (Command: d l) Performs the reset function. Checks the elapsed time. Transmission Screen Reset can only be performed in RGB input mode. Transmission [d][l][ ][Set ID][ ][Data][Cr] [f ][k][ ][Set ID][ ][Data][Cr] Data FF: Read status Data...
- Page 49 33. White Balance Green Gain (Command: j n) 36. White Balance Green Offset (Command: s y) Adjusts the white balance green gain value. Adjusts the white balance green offset value Transmission Transmission [j][n][ ][Set ID][ ][Data][Cr] [s][y][ ][Set ID][ ][Data][Cr] Data 00 to 7F: Green Offset 0 to 127 Data...
-
Page 50: Screen Off K D
39. Screen Off (Command: k d) 42. Tile ID (Command: d i) Turns the screen on or off. Sets the tile ID value of the product. Transmission Transmission [d][i][ ][Set ID][ ][Data][Cr] [k][d][ ][Set ID][ ][Data][Cr] Data 01 to E1: Tile ID 1 to 225** Data 00: turns the screen on FF: checks the tile ID... -
Page 51: Remote Control/Local Key Lock K M
45. Remote Control/Local Key Lock (Command: k m) 48. Fail Over Input Select (Command: m j) Adjusts the remote control/local key (front) lock. Selects an input source for auto switch. Transmission * This command is only available when the Fail Over (auto) [k][m][ ][Set ID][ ][Data][Cr] mode is set to Custom. -
Page 52: Ir Operation T P
49. IR Operation (Command: t p) Data: 03 (when checking the PM mode) Configures the IR operation settings of the product. Data1 00: The PM mode is set to Screen On Transmission 01: The PM mode is set to Screen Off [t][p][ ][Set ID][ ][Data][Cr] 02: The PM mode is set to Screen Off Always 03: In Sustain Aspect Ratio mode. -
Page 53: Check Screen
52. Check Screen (Command: t z) 55. PM Mode (Command: s n, 0c) Sets Check Screen. Selects the desired PM mode option. Transmission Transmission [t][z][ ][Set ID][ ][Data][Cr] [s][n][ ][Set ID][ ][0c][ ][Data][Cr] Data 00: Off Data 00: Sets the Power Off mode. 01: On 01: Sets the Sustain Aspect Ratio mode. -
Page 54: Network Settings
58. Auto-adjustment (Command: j u) 57. Network Settings (Command: s n, 80 or 81 or 82) Automatically corrects the position and shaking of the picture. Configures network and DNS settings. (Works only in RGB-PC input mode.) Transmission Transmission [s][n][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][ ][Data4][ ] [j][u][ ][Set ID][ ][Data][Cr] [Data5][Cr] Data1... -
Page 55: Position
63. Wake On LAN (Command: f w) 60. V Position (Command: f r) Selects the desired Wake On LAN option. Adjusts the vertical position of the screen. This feature only works when the Tile Mode is set to Off. Transmission * The operational range varies depending on the RGB input [f ][w][ ][Set ID][ ][Data][Cr] resolution. -
Page 56: Reset To Initial Settings
66. Reset to Initial Settings (Command: t n) 69. Pivot Mode (Command: t a) Enables/disables the Reset to Initial settings. Sets Pivot Mode to on/off. Transmission Transmission [t][n][ ][Set ID][ ][Data] [Cr] [t][a][ ][Set ID][ ][Data][Cr Data 00: Disables the settings. Data 00: Off 01: Enables the settings. -
Page 57: Dpm Wake Up Control S N, 0B
77. Easy Brightness Control Mode (Command: s m) 73. DPM Wake up Control (Command: s n, 0b) Selects whether to turn on/off Easy Brightness Control Mode. Sets the DPM Wake up Control Mode. Transmission Transmission [s][m][ ][Set ID][ ][Data][Cr] [s][n][ ][Set ID][ ][0][b][ ][Data][Cr] Data 00: Easy Brightness Control off Data... -
Page 58: Easy Brightness Control Schedule
78. Easy Brightness Control Schedule (Command: s s) 79. MultiScreen Mode & Input (Command: x c) Sets Easy Brightness Control schedules. Saves or controls the MultiScreen Mode and input. Transmission Transmission [s][s][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] [x][c][ ][Set ID][ ][Data1][ ][Data2][ ][Data3[ ][Data4] [ ][Data5[ ]Cr] Data1 Data1 (sets the MultiScreen Mode) -
Page 59: Screen Mute(Multiscreen)
81. Screen Mute (MultiScreen) (Command: x e) 84. Wireless Wake-on-LAN (Command: s n, 90) Turns on/off each screen in MultiScreen. Sets Wireless Wake-on-LAN. Transmission Transmission [x][e][ ][Set ID][ ][Data1][ ][Data2][Cr] [s][n][ ][Set ID][ ][9][0][ ][Data][Cr] Data 00: Off Data1 01: Controls the Main input 01: On 02: Controls the Sub1 input Acknowledgement... -
Page 60: Holiday Schedule S N, 1B
87. Holiday Schedule (Command: s n, 1b) 88. Dual Screen Off (Command: s n, 92) Configures the Holiday Schedule. Turn Dual Screen On or Off. Transmission Transmission [s][n][ ][Set ID] ][ ][1][a] [s][n][ ][Set ID][ ][9][2][ ][Data][Cr] [ ][Data1][ ][Data2][ ][Data3] [ ][Data4] [Cr] Data 00 : MainScreen –... -
Page 61: Luminance Value Read M U
91. Luminance Value Read (Command: m u) 93. Power Indicator (Command: f o) Reads luminance value. Sets the Power Indicator Settings. Transmission Transmission [m][u][ ][Set ID][ ][FF][Cr] [f ][o][ ][Set ID][ ][Data][Cr] Data 00: Off Acknowledgement 01: On [u][][SetID][][OK/NG][Data1][Data2][Data3] ** This may not be supported on some models. [Data4][Data5][Data6][Data7][x] Acknowledgement [o][ ][Set ID][ ][OK/NG][Data][x]... -
Page 62: Hybrid Mode S N
96. Hybrid Mode (Command: s n, 96) 99. HDMI IT Contents (Command: s n, 99) Sets display’s transparency mode. Uses HDMI data to automatically set Picture Mode. Transmission Transmission [s][n][ ][Set ID][ ][9][6][ ][Data][Cr] [s][n][ ][Set ID][ ][9][9][ ][Data][Cr] Data 00 : Hybrid (effect: Off) Data 00: Off... - Page 63 102. No Signal Image (Command: s n, a9) Turns No Signal Image On or Off. Transmission [s][n][ ][Set ID][ ][a][9][ ][Data][Cr] Data 00: Off 01: On Acknowledgment [n][ ][Set ID][ ][OK/NG][a][9][Data][x] *This feature may not be supported on some models.