Related Manuals for Beko DIS28122
Summary of Contents for Beko DIS28122
- Page 1 Dishwasher User’s Manual Document Number : 18 7283 0100_AA_BEKO_E545_EN/ 05-09-18.(8:20)
- Page 2 Please read this user manual first! Dear Customer, We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
- Page 3 Dishwasher User’s Manual Document Number : 18 7283 0100_AA_BEKO_E545_EN/ 05-09-18.(8:20)
- Page 4 Please read this user manual first! Dear Customer, We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
-
Page 5: Table Of Contents
CONTENTS 1 INSTRUCTIONS FOR SAFETY 5 OPERATING THE PRODUCT 25 Keys ............26 AND ENVIRONMENT Function keys ........26 General safety ........4 Preparing the machine...... 26 Intended use ..........4 Programme selection ......26 Children’s safety ........5 Auxiliary functions ......28 Disposing of packaging material ..5 Scheduling the washing time .. -
Page 6: Instructions For Safety And Environment
instructions for safety and environment This section contains safety Never touch the plug with • instructions that will help to get wet hands! Never unplug by protected from risk of personal pulling on the cable, always injury or property damage. Failure pull out by grabbing the plug. -
Page 7: Children's Safety
instructions for safety and environment Children’s safety This appliance is intended • to be used in household and Electrical products are • similar applications such as: dangerous for the children. - Staff kitchen areas in shops, Keep children away from the offices and other working product when it is in use. -
Page 8: Transportation Of The Product
instructions for safety and environment Transportation of the learn about these collection centers. product Compliance with RoHS If you need to move the Directive product, do it in upright position and hold from The product you have purchased the rear side. Slanting complies with EU RoHS Directive the product onto its (2011/65/EU). -
Page 9: Dishwasher Overview
Dishwasher Overview 1. Upper basket 2. Upper impeller 3. Lower impeller 4. Silverware basket 5. Door 6. Rating Label 7. Control panel 8. Detergent dispenser 9. Lower basket 10. Filters 11. Salt reservoir lid 12. Upper basket rail 13. Upper cutlery basket (depends on model) 14. -
Page 10: Fan Drying System
Dishwasher Technical specifications Compliance to standards and test data / EC declaration of conformity This product complies with the following EU directives; Development, production and sales stages of this product comply with the safety rules included in all pertaining European Community regulations. 2014/35/EU, 2014/30/EU, 93/68/EC, IEC 60436/DIN 44990, EN 50242 Power input 220-240 V, 50 Hz (see rating label) -
Page 11: Installation
Installation Appropriate installation Refer to the nearest Authorised Service Agent for installation of your product. To location make the product ready for use, make sure Place the product on a solid and flat • that the electricity, tap water supply and floor that has sufficient load carrying water drainage systems are appropriate capacity! The product must be... -
Page 12: Connection To The Drain
Installation Permitted water temperature: up must be min. 50 cm and max. 100 cm from to 25°C the floor. A discharge hose longer than 4 The dishwasher may not be connected to meters causes dirty washing. open warm water devices or flow-through Attach the water discharge hose to the water heaters. -
Page 13: Aquasafe
Installation Aquasafe+ The voltage and allowed fuse or breaker • protection are specified in the “Technical (depends on model) specifications” section. If the current The Aquasafe+ system protects against value of the fuse or breaker in the house water leaks that may occur at the hose is less than 16 Amps, have a qualified inlet.Water contact with the valve box of electrician install a 16 Amp fuse. -
Page 14: Preparation Tips For Energy Saving
Preparation Tips for energy saving Adjusting the water softening system Following information will help you use the product in an ecological and energy- Cleaning, rinsing and drying performance of efficient manner. your dishwasher will increase when water Wipe away any coarse food remnants on softening system is adjusted properly. - Page 15 Preparation Remove the test Turn on the tap and Hold the test strip in Remove the test Wait for 1 minute. The test strip shows strip from the let the water run for the water for about strip from the water you the hardness packet.
-
Page 16: Adding Salt
Preparation If the hardness level of the supply water Salt reservoir will be filled is above 90 °dF or if you are using well with water when you start water, then it is recommended to use water the product. For this reason, purification devices and special filters. -
Page 17: Detergent
Preparation Put the detergent into the detergent You need to add salt right before dispenser just before operating the starting the machine. Thus, the machine as illustrated below. overflowing salty water will be Push the latch to right to open the flushed immediately, preventing detergent dispenser lid (A). -
Page 18: Tablet Detergents
Preparation salt and rinse aid must also be used 3. Push the lid of the detergent dispenser together with the detergent if the water to close it. A "click" will be heard when hardness level is above the mentioned level. the lid is closed. -
Page 19: Rinse Aid
Preparation Rinse aid 4. If there are stains on tableware items after washing, level must be increased The rinse aid used in and if there is a blue trace after wiping dishwashers is a special them by hand, it must be decreased. combination that aims to This is set to position 3 as factory increase drying efficiency and... -
Page 20: Placing The Dishes Into The Dishwasher
Preparation Placing the dishes into the dishwasher You can use your dishwasher in the optimum way with respect to energy consumption and washing and drying performance only if you place the dishes in an orderly way. Wipe away any coarse food remnants •... - Page 21 Preparation Suggestions for loading the dishwasher Improper Loading Of Dishware Lower basket Upper basket Dishwasher / User’s Manual 19 / 41 EN...
-
Page 22: Cutlery Basket
Preparation Cutlery basket Collapsible lower basket tines (depends on model) Cutlery basket is designed to wash your (depends on model) dishes such as knife, fork, spoon, etc. in an Foldable tines (A) located at the lower efficient manner. basket of the machine are designed for Since the cutlery basket can be moved (A, an easier placement of large pieces such B), you can create more space while placing... -
Page 23: Collapsible Lower Basket Tines
Preparation Bringing the tines to the horizontal position by holding them from the tips may cause them to bend. Therefore, it will be appropriate to bring the tines in the middle to horizontal or vertical position by holding them from their stems and pushing in the direction of arrow. -
Page 24: Collapsible Upper Basket Wires
Preparation Collapsible upper basket Upper basket multipurpose wires service rack (depends on model) (depends on model) You can use collapsible wires when you This accessory located at the upper basket of need a larger space for your dishes in the your machine allows you to easily wash pieces upper basket of your machine. -
Page 25: Adjusting The Height Of The Upper Basket
Preparation Adjusting the height of the To lower the basket, while it is in the uppermost position; upper basket Hold the upper basket wires with both (depends on model) hands, slightly lift up the basket and The upper basket height adjustment simultaneously push and release the mechanism has been designed for you to latches shown in the figure (B). -
Page 26: Upper Basket Rack
Preparation Upper basket rack (depends on model) Ceiling cutlery basket (depends on model) Ceiling cutlery basket is designed to wash your cutlery items such as forks, spoons and etc. by placing them between the bars on the basket. /41 EN Dishwasher / User’s Manual... -
Page 27: Operating The Product
Operating the product 5 5 5 On/Off key 2. Programme Selection / Programme Cancel (3 seconds) key 3. Function keys Half Load function Fast+ Function Super Rinse Function AquaIntense Function 4. Programme indicator 5. Salt indicator Auto Door Open Indicator 7. -
Page 28: Keys
Operating the product Keys Programme selection On/Off key Press the On/Off button to turn on When you press On / Off key, indicator lights your machine. illuminate on the display for ON position. 2. Check the Salt and Rinse Aid indicators The lights turn off in OFF position. - Page 29 Operating the product Dishwasher / User’s Manual 27 / 41 EN...
-
Page 30: Auxiliary Functions
Operating the product Auxiliary functions Fast+ Function It shortens the time of the washing cycle Washing programmes of your dishwasher selected and decreases water consumption are designed to obtain the best cleaning by enabling washing under higher pressure. effect, considering the type of the soiling, soiling degree and properties of the dishes AquaIntense Function to be washed. -
Page 31: Scheduling The Washing Time
Operating the product Changing the interior lighting Feature can be activated if automatic setting detection is desired. After turning on the machine, To activate / to deactivate: After turning on the machine, press press Time Delay and P+ keys simultaneously. Continue to press until Time Delay and P keys simultaneously. -
Page 32: Starting The Programme
Operating the product Changing the settings while Time Auto Door Open feature, Delay function is active opens the door using the “door While the Time Delay function is activated, opening shafts” you cannot make changes in the washing This action takes approx. 2 programme, auxiliary functions or the minutes. -
Page 33: Cancelling The Programme
Operating the product Pay attention not to open the Adjusting the water hardness door of the machine when it is level is explained in Water running. There may be a rush of Softening System section. vapour when you open the door of your machine;... -
Page 34: End Of Programme
Operating the product Overflowing warning End of programme If the machine intakes too much water or When the programme you have there is leakage at any of the components selected comes to an end, an then the machine will detect this and E:01 audible warning signal will warn icon will flash on the Programme indicator. -
Page 35: Maintenance And Cleaning
Maintenance and cleaning Cleaning the filters Service life of the product extends and frequently faced problems decrease if it is Clean the filters at least once a week in cleaned at regular intervals. order for the machine operates efficiently. Unplug the product and turn off Check if food residues are left on the filters. -
Page 36: Cleaning The Hose Filter
Maintenance and cleaning Cleaning the hose filter Damages on the machine that may be caused by impurities coming from the urban supply water or your own water installation (such as sand, dirt, rust, etc.) can be prevented by means of the filter attached to the water inlet hose. -
Page 37: Cleaning The Impellers
Maintenance and cleaning Cleaning the impellers Upper impeller Clean the impellers at least once a week in Check if the holes on the upper impeller (1) order for the machine operates efficiently. are clogged. If they are clogged, remove and clean the impeller. Turn its nut to left to Lower impeller remove the upper impeller. -
Page 38: Troubleshooting
Troubleshooting Machine does not start. • Power cable is unplugged. >>> Check if the power cable is plugged in. • Fuse is blown. >>> Check the fuses in your house. • Water is cut. >>> Make sure that the water inlet tap is open. •... - Page 39 Troubleshooting • Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the machine. • Machine is unloaded right after the programme is over. >>> Do not unload your machine right after washing process is completed.
- Page 40 Troubleshooting Since the salt granules that will remain under the lid will dissolve during prewash, causing the lid loosen, check the lid once again at the end of the programme. There is a different odour in the machine A new machine has a peculiar odour. It will fade out after a couple of washes. •...
- Page 41 Troubleshooting Detergent remains in detergent dispenser. • Detergent dispenser was damp when adding detergent. >>> Make sure that the detergent dispenser is dried well prior to filling it with detergent. • Detergent is added long before the washing process. >>> Pay attention to add detergent shortly before start-up of the washing.
- Page 42 Troubleshooting A smear remains on glasses that resembles milk stain which can not be removed when wiped by hand. A bluish / rainbow appearance occurs when the glass is pointed to light. • Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled rinse aid when adding rinse aid.