hit counter script
NEC ND-3100 User Manual
NEC ND-3100 User Manual

NEC ND-3100 User Manual

Internal dvd r/rw drive

Advertisement

Quick Links

---------------------------------------------------------------------------------------------
Internal DVD R/RW Drive
ND-3100
User's Manual
- 1 -

Advertisement

Table of Contents
loading

Summary of Contents for NEC ND-3100

  • Page 1 --------------------------------------------------------------------------------------------- Internal DVD R/RW Drive ND-3100 User's Manual - 1 -...
  • Page 2 --------------------------------------------------------------------------------------------- Laser Safety Information This drive employs a laser. Do not remove the cover or attempt to service this device when connected due to the possibility of eye damage. CAUTION Use of control of adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
  • Page 3 --------------------------------------------------------------------------------------------- NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 4: Table Of Contents

    --------------------------------------------------------------------------------------------- Table of Contents Heed the following Warning ............................. 5 Caution .............................. 6 Cautions Cleaning............................. 7 Handling the Disc ..........................7 Part Names and Functions Front View............................8 Rear View ............................9 Preparation Jumper Setting..........................10 Installing the DVD R/RW drive in a host PC ..................11 Inserting/Removing a Disc Using the DVD R/RW Drive Installed Vertically ................
  • Page 5: Heed The Following

    --------------------------------------------------------------------------------------------- HEED THE FOLLOWING Read the operating instructions carefully before using the unit and be sure to use it properly. After reading the instructions, store them in an easily accessible place so they can be consulted whenever necessary. WARNING • Continued use should there be an irregularity (smoke, abnormal smell or sound, etc.) will lead to fires or electric shocks.
  • Page 6: Caution

    --------------------------------------------------------------------------------------------- CAUTION • When connecting computer equipment, audio equipment, speakers, etc., be sure to read the respective manuals carefully, turn of the power and follow the connection instructions. Using cords other than the specified cords or extending cords could generate heat and result in burns, etc. •...
  • Page 7: Cautions

    --------------------------------------------------------------------------------------------- Cautions Cleaning To clean the DVD R/RW drive, wipe it with a soft, damp cloth, using mild detergent if necessary. Please avoid using solvents such as benzine or paint thinner. This can cause color changes or deformation of DVD R/RW drive. Handling the Disc •...
  • Page 8: Part Names And Functions

    --------------------------------------------------------------------------------------------- Part Names and Functions Front View 1 Phones Jack This jack is used to connect a set of headphones. Please use headphones with a stereo mini-jack plug. 2 Volume Control This control is used to adjust the headphone volume. NOTE: This control has no effect on the audio output from the LINE OUT connector on the back of the DVD R/RW drive.
  • Page 9: Rear View

    --------------------------------------------------------------------------------------------- Rear View 7 Jumper Blocks These blocks of jumper locations set the configuration for the DVD R/RW drive. (See page 10, “Jumper Setting” for details.) 8 DIGITAL OUT Connector This connector is used to connect CD Digital Audio to an audio board. 9 Line Out Connector This connector is used to connect CD-Audio to an audio board.
  • Page 10: Preparation

    --------------------------------------------------------------------------------------------- Preparation Jumper Setting A jumper consists of a pair of pins and a connector which fits over the pins. When the connector is in place it establishes an electronic link between the pins, which enables the function being controlled by the jumper.
  • Page 11: Installing The Dvd R/Rw Drive In A Host Pc

    --------------------------------------------------------------------------------------------- Installing the DVD R/RW drive in a host PC Note Refer to the guidebook included with your personal computer for instruc-tions on installing the DVD R/RW drive. This chapter gives one example of installation. And, when disconnecting the DVD R/RW drive from computer equipment, please wait to remove a couple of minutes until it gets cold.
  • Page 12 --------------------------------------------------------------------------------------------- 5. Locate a spare power cable in your computer. 6. Connect that power cable to the power connector on the back of the DVD R/RW drive. - 12 -...
  • Page 13 --------------------------------------------------------------------------------------------- 7. Connect the I/O BUS connector on the DVD R/RW drive and the IDE connector. Connect the colored stripe side of the cable to the side marked with the arrow . 8. Slide the disc drive and DVD R/RW drive into the computer. 9.
  • Page 14: Inserting/Removing A Disc

    --------------------------------------------------------------------------------------------- Inserting/Removing a Disc Using the DVD R/RW Drive Installed Vertically When using the DVD R/RW drive, in the vertical position, load and unload discs as shown on the diagram below. DVD R/RW drive installed vertically DVD R/RW drive installed vertically (left side) (right side) Caution...
  • Page 15: Inserting A Disc

    --------------------------------------------------------------------------------------------- Inserting a Disc 1. Press the Load/Eject button. The disc tray will be ejected. 2. Place the disc in the center of the tray with the label side facing up. 3. Press the Load/Eject button. The disc tray will be retracted. Removing a Disc 1.
  • Page 16: Specifications

    --------------------------------------------------------------------------------------------- Specifications DVD Section User Data Capacity ............4.7 GBytes (Single layer, 12cm), 8.54 GBytes (Dual layer, 12cm) 1.46 GBytes (Single layer, 8cm), 2.66 GBytes (Dual layer, 8cm) User Data Blocks ............2048 Bytes/block Data Transfer Rate ............16.6 Mbytes/sec (Maximum) Access Time ..............
  • Page 17: Cd Section

    --------------------------------------------------------------------------------------------- CD Section User Data Capacity ............656 Mbytes/disc (Mode 1) (1MBytes = 1024 x 1024) ..........748 Mbytes/disc (Mode 2) User Data Blocks ............2048 Bytes, Mode 1 and Mode 2 Form 1 2336 Bytes, Mode 2 2328 Bytes, Mode 2 Form 2 Access Time ..............
  • Page 18: Ide Interface Section

    --------------------------------------------------------------------------------------------- IDE Interface Section Burst Transfer Rate ............PIO mode 4 DMA Single Word mode 2 DMA Multi Word mode 2 Ultra DMA 33 mode 2 Memory Buffer ............... 2 MBytes Audio Section FREQUENCY RESPONS ..........20 Hz - 20 kHz +3.0 dB, -3.0 dB S/N RATIO ..............

Table of Contents