Makita DSP600 Instruction Manual
Cordless plunge cut saw
Hide thumbs
Also See for DSP600:
- Instruction manual (148 pages) ,
- Instruction manual (108 pages) ,
- Instruction manual (25 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Makita DSP600
Summary of Contents for Makita DSP600
- Page 1 INSTRUCTION MANUAL Cordless Plunge Cut Saw DSP600 Read before use.
-
Page 2: Specifications
SPECIFICATIONS Model: DSP600 Blade diameter 165 mm Max. Cutting depth at 0° 56 mm at 45° bevel 40 mm at 48° bevel 38 mm No load speed 2,500 - 6,300 min Overall length 346 mm Rated voltage D.C. 36 V... -
Page 3: General Power Tool Safety Warnings
Prevent unintentional starting. Ensure the SAFETY WARNINGS switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with General power tool safety warnings your finger on the switch or energising power tools that have the switch on invites accidents. WARNING: Remove any adjusting key or wrench before Read all safety warnings, instruc-... - Page 4 Battery tool use and care Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. Use power tools only with specifically desig- nated battery packs. Use of any other battery packs may create a risk of injury and fire. When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one...
- Page 5 Support large panels to minimise the risk of Never force the saw. Push the saw forward at a blade pinching and kickback. Large panels tend speed so that the blade cuts without slowing. to sag under their own weight. Supports must be Forcing the saw can cause uneven cuts, loss of placed under the panel on both sides, near the line accuracy, and possible kickback.
- Page 6 Always use the blade which conforms to EN847-1. causing fires, personal injury and damage. It will SAVE THESE INSTRUCTIONS. also void the Makita warranty for the Makita tool and charger. WARNING: DO NOT let comfort or familiarity with product (gained from repeated use) replace...
-
Page 7: Functional Description
Overload protection FUNCTIONAL When the tool is operated in a manner that causes it to DESCRIPTION draw an abnormally high current, the tool automatically stops. In this situation, turn the tool off and stop the application that caused the tool to become overloaded. CAUTION: Always be sure that the tool is Then turn the tool on to restart. -
Page 8: Adjusting Depth Of Cut
Indicating the remaining battery capacity Only for battery cartridges with the indicator ► 1 . Mode indicator The mode indicator lights up in green when the tool is running in "high torque mode". If the tool is operated with excessive load, the mode indicator will blink in green. The mode indicator stops ► 1 . Indicator lamps 2. Check button blinking and then lights up or turns off if you reduce the load on the tool. -
Page 9: Bevel Cutting
Quick stop button for 2 to 3 mm depth of cut when using guide rail (optional accessory) This tool has the quick stop button for 2 to 3 mm depth of cut on the gear housing aside the rear handle when using guide rail. This is used when avoiding splinter on the workpiece in the cut. Make a pass of the 2 to 3 mm first cut and then make another pass of usual cut. - Page 10 WARNING: NEVER use the tool if it runs when you simply pull the switch trigger without pressing the lock-off button. A switch in need of repair may result in unintentional operation and serious personal injury. Return tool to a Makita ► 1 . Lever service center for proper repairs BEFORE further usage. -1°-bevel cutting To prevent the switch trigger from being accidentally pulled, a lock- off button is provided. To start the tool, depress the lock-off button To perform -1°-bevel cutting, loosen the clamping screws and...
-
Page 11: Electronic Function
Be sure the circular saw blade is 3,900 min installed with teeth pointing up at the front of the tool. 4,900 min CAUTION: Use only the Makita wrench to 6,300 min install or remove the circular saw blade. To remove the circular saw blade: CAUTION: The speed adjusting dial is not... -
Page 12: Operation
Optional accessory When you wish to perform clean cutting operation, connect a Makita vacuum cleaner to your tool. Connect a hose of the vacuum cleaner to the dust nozzle using the front cuffs 24. ► 1 . Hose of the vacuum cleaner 2. Front cuffs 24 3. -
Page 13: Guide Rail
Hold the tool firmly. The tool is provided with both a front grip and rear handle. Use both to best grasp the tool. If both hands are holding saw, they cannot be cut by the circular saw blade. Set the base on the workpiece to be cut without the circular saw blade making any contact. Then push in the lock-off button and pull the switch trigger. -
Page 14: Maintenance
► 1 . Front cutting point (165 mm blade) 2. Rear cut- ting point (165 mm blade) ► 1 . Clamping screw 2. Sub base Guide device Plunge cutting (Cutting-out) Optional accessory Use of the bevel guide allows exact miter cuts with WARNING: To avoid a kickback, be sure to angles and fitting works. observe the following instructions. -
Page 15: Optional Accessories
Adjust the blade angle. OPTIONAL 0° ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment 45° for its stated purpose. If you need any assistance for more details regard- ing these accessories, ask your local Makita Service Center. - Page 16 Makita Europe N.V. Jan-Baptist Vinkstraat 2, 3070 Kortenberg, Belgium Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 885581B229 www.makita.com 20170301...