Connecting The Console Terminal And Modem; Connecting To The Console Port - Cisco AS5300 Manual

Access server

Hide thumbs Also See for AS5300:

Table of Contents

Connecting the Console Terminal and Modem

Use the console terminal for local administrative access to the access server. You can only

connect a terminal to the console port. You can use the auxiliary port to connect a terminal or a

modem for remote access to the access server.

To connect a terminal (an ASCII terminal or a PC running terminal emulation software) to the

console port on the access server:

Step 1 Connect the terminal using an RJ-45 rollover cable and an RJ-45-to-DB-25 or RJ-45-to-

DB-9 adapter. The adapters provided are labeled TERMINAL. Other types of adapters are not

included. (See .)

For additional information on rollover cable pinouts, see the appendix "."

Step 2 Configure your terminal or PC terminal emulation software for 9600 baud, 8 data bits, no

parity, and 2 stop bits.

Figure 3-12 Connecting the Console Terminal

Table of Contents