Heat Sink Assembly - HP Mini 1000 Maintenance And Service Manual
Hp mini 1000: supplementary guide
Hide thumbs
Also See for Mini 1000:
- Maintenance and service manual (121 pages) ,
- User manual (99 pages) ,
- User manual (83 pages)
Table of Contents
Advertisement
Heat sink assembly
NOTE:
The heat sink assembly spare part kit includes replacement thermal material.
Description
Heat sink assembly
Before removing the heat sink assembly, follow these steps:
1.
Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device
on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the device.
3.
Disconnect the power from the device by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the device.
4.
Remove the battery (see
5.
Remove the following components:
a.
Keyboard (see
b.
Hard drive or solid-state drive (see
c.
Top cover (see
d.
WLAN module (see
Remove the heat sink assembly:
1.
Remove the two Phillips PM1.6×2.5 screws (1) that secure the heat sink assembly to the system
board.
Battery on page
32).
Keyboard on page
35)
Mass storage devices on page
Top cover on page
40)
WLAN module on page
37)
43)
Component replacement procedures
Spare part number
515099-001
51
- Quick Links:
- Product Description
- Battery
- Mass Storage Devices
Hide quick links:
Advertisement
Table of Contents
