Page 1
Washing machine WG54G200ES User manual and installation instructions Register your product on My Siemens and discover exclusive services and offers. siemens-home.bsh-group.com/welcome The future moving in. Siemens Home Appliances...
Table of contents 1 Safety .......... 4 10 Before using for the first time........ 32 1.1 General information.... 4 10.1 Starting an empty washing 1.2 Intended use....... 4 cycle ........ 32 1.3 Restriction on user group... 4 1.4 Safe installation ...... 5 11 Laundry........ 33 1.5 Safe use ........ 7 11.1 Preparing the laundry ..... 33 1.6 Safe cleaning and mainten-...
Page 3
14 Childproof lock...... 39 14.1 Activating the childproof lock ......... 39 14.2 Deactivating the childproof lock ......... 39 15 Basic settings...... 40 15.1 Overview of the basic set- tings........ 40 15.2 Changing the basic set- tings........ 41 16 Cleaning and servicing .... 41 16.1 Tips on appliance care... 41 16.2 Cleaning the drum.... 41 16.3 Cleaning the detergent...
en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡...
Safety en 1.4 Safe installation Take note of the safety instructions when installing the appliance. WARNING ‒ Risk of electric shock! Improper installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing.
Page 6
en Safety WARNING ‒ Risk of injury! The high weight of the appliance may result in injury when lifted. ▶ Do not lift the appliance on your own. If this appliance is not correctly installed in a washer-dryer stack, the installed appliance may fall. ▶...
Safety en ▶ Wear protective gloves when installing and transporting the ap- pliance. 1.5 Safe use WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. ▶ Never operate a damaged appliance. ▶ Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains.
Page 8
en Safety WARNING ‒ Risk of poisoning! Detergents and care products may result in poisoning if con- sumed. ▶ If accidentally swallowed, seek medical advice. ▶ Keep detergents and care products out of the reach of children. WARNING ‒ Risk of explosion! Laundry that has been pretreated with cleaning agents that con- tain solvents may cause an explosion in the appliance.
Safety en CAUTION ‒ Risk of chemical burns! If the detergent drawer is opened, detergent and care products may spray out from the appliance. Contact with eyes or skin may cause irritation. ▶ Rinse eyes and/or skin thoroughly with clean water if they come into contact with detergents or care products.
en Preventing material damage Make sure that the valve housing ▶ Preventing material damage 2 Preventing material for the water inlet hose does not come into contact with its sur- damage roundings and is not subjected to any external forces. Follow these instructions to avoid ma- Preventing material damage Ensure that the inner diameter of terial damage and damage to the ap-...
Environmental protection and saving energy en Do not use cleaning products with Reduce the washing temperature for ▶ a high alcohol content. lightly and normally soiled laundry. Do not use hard scouring pads or ▶ a At low temperatures, the appliance cleaning sponges.
en Installation and connection erate properly, or this may result in Installation and connection 4 Installation and con- material damage or damage to the appliance. nection Do not operate the appliance with ▶ incomplete or defective accessor- Installation and connection 4.1 Unpacking the appliance ies.
Page 13
Installation and connection en Installation loca- Requirements WARNING tion Risk of injury! When using the appliance on a base, Against a wall Do not trap the the appliance may tip over. hoses between Always secure the feet of the appli- the wall and the ▶...
en Installation and connection Unscrew and remove all 4 Put on the 4 cover caps. screws for the transit bolts with a WAF 13 wrench. Press down on the 4 cover caps. Pull the power cable out of the holder. 4.5 Connecting the appliance Connecting the water inlet hose Remove the 4 sleeves.
Installation and connection en Connect the water inlet hose to a Sink Fix and secure tap (26.4 mm = 3/4"). the water outlet hose with an el- → Page 32. Plastic pipe with Fix and secure rubber sleeve or the water outlet gully hose with an el- → Page 32.
en Installation and connection To align the appliance, turn the ap- Check the mains plug is inserted pliance feet. Check that the appli- properly. ance is level using a spirit level. All appliance feet must stand firmly on the ground. Screw the lock nuts tightly against the housing using a WAF 17 wrench.
Familiarising yourself with your appliance en Familiarising yourself with your appliance 5 Familiarising yourself with your appliance Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured.
en Familiarising yourself with your appliance 5.2 Detergent drawer Measuring aid for liquid deter- gent → "Using a measuring aid for liquid detergent", Page 37 Compartment II: ¡ Detergent for main wash ¡ Water softener ¡ Bleach ¡ Stain remover Compartment ¡ Fabric softener ¡...
Display en Display 6 Display The display shows the current settings, options or relevant information. Display Example: Display Display Designation More information 0:40 Programme dura- Approximate expected programme dura- tion/programme tion or programme time remaining. time remaining "Ready in" time → "Buttons", Page 22 10 kg Recommended The maximum load capacity for the selec-...
Page 20
en Display Display Designation More information Rinse Programme status Spin Programme status End of pro- Programme status gramme Childproof lock ¡ lights up: The childproof lock is activ- ated. ¡ flashes: The childproof lock is activated and the appliance has been operated. → "Deactivating the childproof lock", Page 39 Less Ironing...
Page 21
Display en Display Designation More information Voltage control Flashes: The programme has been system paused because of impermissible voltage drops. The voltage is permissible again and the programme will continue. Note: The programme duration is exten- ded. Door ¡ Lights up: The door is locked and can- not be opened.
en Buttons Buttons 7 Buttons The selection of programme settings depends on the programme that is set. Buttons You can see the selection options for each programme in the overview for → "Programmes", Page 24. Button Selection More information inicio pausa ¡ Start Start, cancel or pause the pro- +carga (Start/Re- gramme.
Page 23
Buttons en Button Selection More information menos (Easy ¡ Activate Activate or deactivate the reduced Iron) creasing programme. ¡ Deactivate In order to reduce creasing in the laundry, the spin cycle and the spin speed are adapted. The laundry is damp enough after washing that it needs to be hung out on a washing line.
Page 24
en Programmes menos prelav. extra manchas varioSpeed Max. spin speed 1400 (rpm) Max. temperature (°C) Max. load (kg)
Page 25
Programmes en – menos – prelav. – extra – manchas – varioSpeed Max. spin speed 1400 1200 (rpm) – Max. temperature (°C) Max. load (kg)
Page 26
en Programmes – menos – prelav. – extra – manchas – – varioSpeed Max. spin speed 1400 (rpm) Max. temperature (°C) Max. load (kg)
Page 27
Programmes en – menos – – – prelav. – – extra – – – manchas – – – varioSpeed Max. spin speed 1400 1400 1200 (rpm) – – Max. temperature (°C) Max. load (kg)
Page 28
en Programmes – menos – prelav. – extra – manchas – varioSpeed Max. spin speed 1200 (rpm) – Max. temperature (°C) Max. load (kg)
Page 29
Programmes en – menos – prelav. extra manchas – varioSpeed Max. spin speed (rpm) Max. temperature (°C) Max. load (kg)
Page 30
en Programmes – menos – prelav. extra – manchas varioSpeed Max. spin speed 1400 1200 (rpm) Max. temperature (°C) Max. load (kg)
Page 31
Programmes en menos prelav. extra manchas varioSpeed Max. spin speed (rpm) Max. temperature (°C) Max. load (kg)
en Accessories Accessories 9 Accessories Use original accessories. These have been made especially for your appliance. Accessories Order number Water inlet hose exten- Extend the water inlet WZ10131 sion hose for cold water or AquaStop (approx. 2.50 Pedestal with drawer Install the appliance at a WZWP20W raised height so that it can be easily loaded and...
Laundry Note: More detailed instructions for several times use can be found on www.siemens- – Wash large and small items of home.bsh-group.com or by scanning laundry together the QR code on the title page of this –...
en Laundry Wash laundry of the same 11.2 Sorting laundry type of fabric and fibre to- Note: Observe the information on gether. safety → Page 4 and preventing ma- – Care symbols on the care labels terial damage → Page 10. → Page 34 – Description of the programmes To improve washing results and ▶...
Detergents and care products en ¡ Do not mix different liquid deter- Detergents and care products 12 Detergents and care gents ¡ Do not mix detergent and fabric products softener ¡ Do not use products that have ex- Detergents and care products Note: Observe the information on pired or are highly congealed safety → Page 4 and preventing ma-...
en Basic operation Water hardness Hardness range Total hardness in mmol/ German degrees in °dH soft (I) 0–1.5 0–8.4 medium (II) 1.5– 2.5 8.4–14 hard (III) over 2.5 over 14 Example of a manufacturer's instructions for detergent These example values refer to a standard load of 4–5 kg.
Basic operation en Open the door. 13.6 Use the measuring aid Make sure that the drum is empty. for liquid detergent Place the laundry in the drum. To add liquid detergent, you can use Close the door. a measuring aid in the detergent Ensure that there is no laundry drawer.
en Basic operation ¡ Observe the information about de- 13.10 Cancelling the pro- tergents and care products gramme → Page 35. Note: Observe the information on Pull out the detergent drawer. safety → Page 4 and preventing ma- Pour in detergent. terial damage → Page 10. → "Detergent drawer", Page 18 Press inicio pausa+carga.
Childproof lock en a The controls are locked. 13.13 Switching off the appli- a The childproof lock remains active ance even after the appliance has been switched off. Turn the programme selector to 14.2 Deactivating the child- proof lock Requirement: To deactivate the childproof lock, the appliance must be switched on.
en Basic settings Basic settings 15 Basic settings You can configure the appliance to meet your needs. Basic settings 15.1 Overview of the basic settings Basic setting Programme Value Description position End signal 0 (off) Set the volume of the signal at the 1 (quiet) end of the programme.
Cleaning and servicing en 15.2 Changing the basic set- Remove all de- Fresh deposits tergent residue, are easier to re- tings spray residue or move without Set the programme selector to po- other residues leaving any sition 1. immediately. residue. Keep the appli- This allows the ance door and residual water to...
en Cleaning and servicing Press down on the insert and re- Fit the insert and click it into place. move the detergent drawer. Clean the opening for the deter- Pull out the insert upwards. gent drawer. Clean the detergent drawer and in- Push in the detergent drawer.
Cleaning and servicing en Slide a sufficiently large receptacle 16.5 Cleaning the drain pump under the opening. Clean the drain pump in the event of faults, e.g. blockages or rattling noises. Emptying the drain pump Note: Please read the information in the Safety → Page 4 and Preventing material damage → Page 10 sections to ensure that you use the appliance safely.
Page 44
en Cleaning and servicing Cleaning the drain pump CAUTION - Risk of scalding! When you wash at high temperat- Note: Please read the information in ures, the detergent solution gets the Safety → Page 4 and Preventing hot. material damage → Page 10 sections Do not touch the hot detergent to ensure that you use the appliance ▶...
Cleaning and servicing en Clean the water outlet hose and si- Before the next wash phon connecting piece. To prevent unused detergent from flowing straight into the outlet in the next wash, run the programme after you have emptied the drain pump.
Page 46
en Cleaning and servicing Connect the water inlet hose and Cleaning the filter on the tap check for leaks. Note: Please read the information in the sections on Safety → Page 4 and Preventing material damage → Page 10. Requirement: The water inlet hose is empty. Remove the water inlet hose from the tap.
Page 47
Cleaning and servicing en Use pliers to remove the filter. Clean the filter with a small brush. Reinsert the filter. Connect the hose and check for leaks.
en Troubleshooting Troubleshooting 17 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- Troubleshooting ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶...
Page 49
Troubleshooting en Fault Cause and troubleshooting The water pressure is low. No remedial action possible. The filters in the water inflow are blocked. Clean the filters in the water inflow → Page 45. ▶ The tap is turned off. Turn on the tap. ▶...
Page 50
en Troubleshooting Fault Cause and troubleshooting The appliance is not Check whether the lighting in your kitchen or other ▶ working. appliances are working. The programme does You have not pressed inicio pausa+carga. not start. Press inicio pausa+carga. ▶ Door is not closed. Close the door.
Page 51
Troubleshooting en Fault Cause and troubleshooting The water is not drain- Immediate measure: Mix one tablespoon of fabric ▶ ing. softener with 0.5 litres of water and pour the mix- ture into the left-hand compartment (not for outdoor clothing, sportswear or items stuffed with down). Reduce the amount of detergent for the next wash- ▶...
Page 52
en Troubleshooting Fault Cause and troubleshooting No water is visible in Water is below the visible area. the drum. Not a fault – no action required. ▶ Do not add any extra water to the appliance while it ▶ is operating. Drum jerks after the This is caused by an internal motor test.
Page 53
Troubleshooting en Fault Cause and troubleshooting The spin programme Drain pipe or water outlet hose is blocked. does not start. Clean the drain pipe and the water outlet hose. ▶ Drain pipe or water drain hose is caught or jammed. Ensure that the drain pipe and water drain hose are ▶...
Page 54
en Troubleshooting Fault Cause and troubleshooting Detergent or fabric Too much detergent/fabric softener in the detergent softener drips off the drawer. seal and collects on When dosing liquid detergent and fabric softener, ▶ the door or in the seal observe the marking in the detergent drawer and fold.
Page 55
Troubleshooting en Fault Cause and troubleshooting Water is leaking out at Water inlet hose is not correctly/securely connected. the water inlet hose. Connect the water supply hose correctly. Connect- ing the water inlet hose Tighten the screw connection. Water is leaking out at The water outlet hose is damaged.
18.1 Removing the appliance again Note: More detailed instructions for For further information, see ▶ use can be found on www.siemens- → "Installation and connection", home.bsh-group.com or by scanning Page 12 and the QR code on the title page of this → "Before using for the first time", user manual.
Customer Service en 18.4 Disposing of old appli- Customer Service 19 Customer Service ance If you have any queries on use, are Customer Service Valuable raw materials can be re- unable to rectify faults on the appli- used by recycling. ance yourself or if your appliance needs to be repaired, contact Cus- WARNING tomer Service.
Page 58
en Customer Service Make a note of your appliance's de- tails and the Customer Service tele- phone number to find them again quickly.
Consumption values en Consumption values 20 Consumption values The following information is provided in accordance with the EU Ecodesign Consumption values Regulation. The values given for programs other than the Eco 40-60 are indicat- ive only and were determined in accordance with the applicable standard EN60456.
Page 60
en Technical specifications Minimum in- 10 A stallation protec- tion Nominal power 2300 W Power consump- ¡ Off mode: tion 0,10 W ¡ Left-on mode: 0,50 W Water pressure ¡ Minimum: 100 kPa (1 bar) ¡ Maximum: 1000 kPa (10 bar) Length of the wa- 150 cm ter inlet hose Length of the wa- 150 cm ter outlet hose...
Page 64
Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT United Kingdom Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG *9001652826* 9001652826 (010616)