en Index Information concerning disposal Safety and warning information Installation ......Changing over the door hinges Connecting the appliance Your new appliance .
Information concerning disposal x Disposal of packaging x Disposal of your old appliance Warning Safety and warning information Before you switch ON the appliance Technical safety If damage has occurred...
Important information when using the appliance Risk of explosion! Risk of electric shock! Explosion hazard! Children in the household General requirements...
Installation Installation location Installation under a worktop Fig. 1 Do not install hotplates above the appliance! Do not remove the worktop frame! Aligning the appliance Fig. 2 Changing over the door hinges Warning Fig. 4...
Connecting the appliance Warning Your new appliance Fig. 5 1 3 Fascia On/Off switch Light Drawers Vegetable and bottle drawer Door storage compartment...
Fascia Fig. 6 Temperature selection button For selecting the refrigerator compartment temperature (between +8 C and +2 C). Hold down or keep pressing the button until the required temperature display light (2) flashes. Temperature display lamp The numbers next to the temperature display lights indicate the refrigerator compartment temperatures in C.
Switching on the appliance Fig. 6 Press main switch 4 (red circle disappears). To do this, open the door switch is located at the bottom left hand side of the fascia. Temperature display light +5 °C flashes. The appliance begins to cool. We recommend a setting of +4 °C.
We recommend that you arrange the food inside the refrigerator as follows: S In the first and second drawers: e.g.: butter, cheese, cakes and pastries, ready meals. S In the third drawer: e.g. meat, sausage, fish and eggs. S In the fourth drawer: e.g.
Bottle shelf/compartment divider Fig. w Door storage compartment Fig. e Switching off the appliance Fig. 6 Disconnecting the appliance Cleaning the appliance Fig. 9 Fig. 9 Fig. 6 Fig. t Fig. 7 Attention!
Important care information for stainless steel appliances Use Chromol" cleaning agent for cleaning stainless steel surfaces. This cleaning agent is available on the market under the name Chromol" or from your customer service under ident no. 310359 as a 500 ml spray can or under ident no.
Eliminating minor faults yourself Before you call customer service: Please check whether you can eliminate the fault yourself based on the following information. Customer service will charge you for advice, even if the appliance is still under guarantee! Fault Temperature differs greatly from the set value.
Fault The refrigerating unit is switching on more is switching on more frequently and for frequently and for longer. Refrigerator has no cooling capacity. cooling capacity. Customer service Please check your telephone book or the customer service list for your nearest customer service facility.