Table of contents Safety precautions ............ 5 Your new appliance ..........8 The gas burner ............9 Switching on automatically ........... Safety system ..............Switching off the burner............Power levels ............... Warnings ................Suitable pans ..............Accessories ................ Cooking recommendations..........Precautions for use..........
Page 4
Dear customer, Congratulations on your choice and thank you for purchasing one of our appliances. This practical, modern and functional appliance is manufactured using materials of the highest quality which are subject to strict Quality Control checks throughout the entire manufacturing process. The appliance is meticulously tested to ensure that it meets your demands and produces perfect cooking results.
Safety precautions Read these instructions carefully. Reading these instructions will enable you to use your appliance safely and effectively. Use approved gas tubing bearing EMSD approval 機電工程署批准 marking (example: EMSD APPROVAL GTXXXX) for connection to appliances, or other appropriate methods accepted by EMSD. HK Town Gas connection External Gas Governor Beckley 2300 or Elitre EL-130 should be installed, the operating pressure is...
Page 6
Please do not use additional fitting, such as aluminum cover. All operations relating to installation and regulation must be carried out by an authorised installation engineer, respecting applicable regulations, standards and the specifications of the local gas and electricity providers. Before installing your new hob, ensure that it is being installed...
Page 7
out. Risk of burns! Put the fire out by covering the pan with a lid and switch off the hotplate. In the event of a malfunction, turn off the appliance’s gas and electricity supply. For repairs, call our Technical Assistance Service. If one of the controls will not turn, do not force it.
Your new appliance Double-flame burner town gas hob with flame sensor safety Product description: device. 6.0 kW (with Hong Kong town gas at 12.5 mbar) Heat input: Product dimension: 527 x 306 x 87 mm (D x W x H) Net weight: 8,0 kg Operating gas pressure/...
The gas burner Operation It is essential to ensure that all the burner parts and the pan supports are correctly installed for the appliance to work correctly. Fig. 1 + 2. burner cover burner cap outer burner spreader intermediary ring flame diffuser Fig.
Your hob has a safety system (thermocouple) that prevents Safety system the flow of gas if the burner accidentally switches off. To ensure that this device is active, switch on the burner as usual and, without releasing the control, press and hold it down firmly for 4 seconds after lighting the flame.
Keep the burner as clean as possible. If the ignition sparkers are dirty, they will not light properly. Clean them periodically using a small non-wire brush. Bear in mind that the ignition sparkers must not suffer any serious impacts. An orange-coloured flame is normal. This is caused by the presence of dust in the atmosphere, spilt liquids, etc.
The hob includes the following accessories. These are also Accessories available from the Technical Assistance Service. Only for use with pans which are more than 26 cm in diameter Additional wok pan (roasting dishes, earthenware pots, etc.) and with pans with a support concave base.
Precautions for use The following advice is intended to help you save energy and prevent pan damage: Use pans which are the right size for each burner. Do not use small pans on large burners. The flame should not touch the sides of the pan. Do not use damaged pans, which do not sit evenly on the hob.
Cleaning and maintenance Once the appliance is cool, use a sponge to clean it with soap Cleaning and water. After each use, clean the surface of the respective burner parts once they have cooled down. If any bits are left (overcooked food, drops of grease etc.), however few, they will become stuck to the surface and more difficult to remove later.
Faults Sometimes certain faults detected can be easily resolved. Before calling the Technical Assistance Service, bear in mind the following advice: Fault Possible cause Solution The general electrical Defective fuse. Contact a registered gas system is installer. The automatic safety switch malfunctioning.
Technical Assistance Service When contacting our Technical Assistance Service, please provide the product number (E-Nr.) and production number (FD) of the appliance. This information is given on the specifications plate located on the lower section of the hob. Warranty conditions The applicable warranty conditions are those set out by the company’s representative office in the country of purchase.