Page 2
Please read these instructions first before using your appliance Thank you for choosing a Beko appliance. Please take some time to read this user manual before using your appliance, to ensure you know how to safely operate the controls and functions.
Contents Introduction & safety warnings................2 Electrical requirements..................3 Transportation instructions.................4 Important installation instructions ..............5 Getting to know your fridge / freezer..............6 Suggested arrangement of food in the fridge / freezer........7 HarvestFresh.......................7 Temperature control and adjustment..............8 Starting........................9 Storing frozen food....................9 Freezing fresh food.....................9 Making ice cubes....................9 Defrosting......................10 Cleaning and care.....................11...
Congratulations on your choice of a quality Appliance which has been designed to give you service for many years. WARNING! IMPORTANT! DO NOT connect your appliance to the electricity supply until all packing and transit protectors have been removed. • Leave to stand for at least 4 hours before switching on to allow compressor oil to settle if transported horizontally.
Should the mains lead of the appliance become damaged or should it need replacing at any time, it must be replaced by a special purpose made mains lead which can only be obtained from a Beko Authorised Service Agent. WARNING! THIS APPLIANCE MUST BE EARTHED If the fitted moulded plug is not suitable for your socket, then the plug should be cut off and an appropriate plug fitted.
/ moving the appliance, to avoid the mains cable becoming cut or damaged. Do not allow children to play with the appliance or tamper with the controls. Beko plc declines to accept any liability should the instructions not be followed.
IMPORTANT INSTALLATION INSTRUCTIONS 1. The space in the room where the appliance is installed must not be smaller than 10 cubic metres. 2. See pages 14 to 17 for detailed instructions regarding reversing door opening direction, including Installation of high levelling foot. 3.
TEMPERATURE CONTROL AND ADJUSTMENT CONTROL PANEL 1- On/Off function 6- Quick Fridge Function Press the On/Off button for 3 When you press Quick Fridge button, the seconds to turn off or turn on the temperature of the compartment will be fridge.
STARTING Final Check Before you start using the fridge/freezer check that: 1. The interior is dry, and air can circulate freely at the rear of the cabinet. 2. Clean the interior as recommended under "CLEANING AND CARE". 3. Insert the plug into the wall socket and switch on the electricity supply. •...
DEFROSTING A) ) FRIDGE COMPARTMENT The fridge compartment defrosts automatically. The defrosting water runs to the drain tube via a collection container at the back of the appliance (1) (see diagram). During defrosting water droplets may form at the back of the fridge compartment where concealed evaporator is located. Some droplets may remain on the liner and refreeze when defrosting is completed.
CLEANING AND CARE ** We recommend that you switch off the appliance at the socket outlet and pull out the mains plug before cleaning. ** Never use any sharp abrasive instrument, soap, household cleaner, detergent and wax polish for cleaning. ** Use lukewarm water to clean the cabinet of the appliance and wipe it dry.
DO'S AND DON'TS Clean and defrost your appliance regularly (see "Defrosting"). Keep raw meat and poultry below cooked food and dairy products. Take off any unusable leaves on vegetables and wipe off any soil. Leave lettuce, cabbage, parsley and cauliflower on the stem. Wrap cheese firstly in greaseproof paper and then in a polythene bag excluding as much air as possible.
ENERGY SAVING TIPS 1- Ensure your appliance is installed in a well ventilated area. If the ambient temperature is low (but in no case lower than 10 degrees C), then the energy saving will be more. In this case, check temperatures of fridge and freezer compartments with an accurate thermometer and lower the thermostat setting (towards 1) if necessary.
REVERSING THE DOORS Proceed in numerical order. Top door 1.Unscrew top hinge (1). 2.Carefully remove the top door (2). 3.Unscrew lower hinge (3). 4.Remove plastic plugs (7 & 8). 5.Refit top hinge (1) as lower hinge (16) on the left hand side. 6.Replace top door (17).
AND CONDITIONS The standard guarantee starts from the date of original purchase of the product, and lasts for a period of twelve (12) months unless Beko plc (the “Manufacturer”) agrees to extend the guarantee for the product in writing. If you have purchased an American style Fridge freezer, the standard guarantee starts from the date of original purchase of the product, and lasts for a period of twenty four (24) months unless Beko plc (the “Manufacturer”) agrees to extend the guarantee for the product in writing.
When will the repair take place? Will there be any charge for the repairs? BEKO UK AND IRELAND BUILT-IN APPLIANCES GUARANTEE TERMS AND CONDITIONS If you have purchased a built-in or integrated appliance, and registered it within 90 days of...
BEKO UK AND IRELAND PROSMART INVERTER MOTOR GUARANTEE TERMS AND CONDITIONS This 10 year guarantee relates to Beko products that feature the ProSmart Inverter Motor. In order to activate the 10 year guarantee you MUST register the appliance within 90 days of the original purchase date.
HOW TO OBTAIN SERVICE FOR YOUR APPLIANCE Model number Serial number Purchased from Date of purchase For service under guarantee or for product advice please call our Contact centre UK Mainland & Northern Ireland: 0333 207 9710 Landline or mobile calls to 0333 numbers cost no more than calls to geographic numbers 01 or 02, and are charged at the basic rate.