HP Net PC 20 Hardware Manual
Hp net pc 20: hardware guide
Hide thumbs
Also See for Net PC 20:
- User manual (232 pages) ,
- Reference manual (175 pages) ,
- Getting started manual (120 pages)
Table of Contents
Advertisement
Quick Links
Hard Disk Drive
Slim CD-ROM Drive
Accessory Board Slots
HP NetVectra PC
Replacing Hardware Components
For information about upgrading your PC and installing accessories,
refer to the Accessories Guide, available on HP's web site
www.hp.com/go/vectrasupport
Slim Floppy Disk Drive
Main Memory (SDRAM)
32 MB 64-bit SDRAM module (D6501A)
64 MB 64-bit SDRAM module (D6502A)
128 MB 64-bit SDRAM module (D6503A)
.
Advertisement
Table of Contents
Related Manuals for HP Net PC 20
Summary of Contents for HP Net PC 20
- Page 1 Accessory Board Slots HP NetVectra PC Replacing Hardware Components For information about upgrading your PC and installing accessories, refer to the Accessories Guide, available on HP’s web site www.hp.com/go/vectrasupport Slim Floppy Disk Drive Main Memory (SDRAM) 32 MB 64-bit SDRAM module (D6501A)
-
Page 2: Before You Start
PC, or to HP, so that they can either be recycled or disposed of in an environmentally sound way. Returned used batteries will be accepted free of charge. -
Page 3: Removing And Replacing The Cover
HP NetVectra PC Replacing Hardware Components Removing and Replacing the Cover Removing and Replacing the Cover WARNING For your safety, never remove the NetVectra PC’s cover without first removing the power cord from the power outlet and any connection to a telecommunication network. - Page 4 HP NetVectra PC Replacing Hardware Components Removing and Replacing the Cover 5 Pull the sides outward and lift off the cover. Replacing the Cover 1 Ensure that you have installed all your accessories and that all internal cables are properly connected and safely routed.
- Page 5 HP NetVectra PC Replacing Hardware Components Removing and Replacing the Cover 3 Slide the cover forward into place. 4 Replace the three rear screws. 5 Reconnect all the power cables. English 5...
- Page 6 HP NetVectra PC Replacing Hardware Components Removing and Replacing the Front Chassis Removing and Replacing the Front Chassis Removing the Front Chassis 1 Remove the cover (described in this chapter). 2 Remove the two screws at the top of the chassis.
- Page 7 7 Lift off the front chassis and place it on a flat work surface. You are now ready to install accessories, such as a slim CD-ROM drive or slim floppy drive. HP NetVectra PC Replacing Hardware Components Removing and Replacing the Front Chassis English 7...
- Page 8 HP NetVectra PC Replacing Hardware Components Removing and Replacing the Front Chassis Replacing the Front Chassis 1 Replace the connectors to the CD-ROM drive and the hard disk drive. 2 On the system board, replace the floppy drive connector and the front panel.
-
Page 9: Replacing A Memory Module
NetVectra PC (described in this chapter). It is not necessary to disconnect any cables. 4 Open the two tabs and remove the old memory module. HP NetVectra PC Replacing Hardware Components Replacing a Memory Module Location of two memory sockets... - Page 10 HP NetVectra PC Replacing Hardware Components Replacing a Memory Module 5 Line up the two side notches correctly and insert the new memory module. (You can use either slot.) 6 Replace the front chassis, ensuring that all cables are properly routed as you slide it carefully into place.
-
Page 11: Which Connectors To Use For Mass Storage Devices
Slim Floppy Disk Drive Connector Slim CD-ROM Drive Connector HP NetVectra PC Replacing Hardware Components Which Connectors to Use for Mass Storage Devices Hard Disk Drive Power Connector Hard Disk Drive Data... -
Page 12: Replacing The Hard Disk Drive
HP NetVectra PC Replacing Hardware Components Replacing the Hard Disk Drive Replacing the Hard Disk Drive Your NetVectra PC has one hard disk drive installed. You can replace the installed disk drive with a larger disk drive. 1 Remove the computer’s cover (described in this chapter). - Page 13 HP NetVectra PC Replacing Hardware Components Replacing the Hard Disk Drive 5 Carefully remove the hard disk drive from the front chassis. 6 Carefully slide the hard disk drive into the shelf, and secure the drive with the screws. 7 Place the front chassis upside down on the rear of the NetVectra PC.
- Page 14 HP NetVectra PC Replacing Hardware Components Replacing the Hard Disk Drive 8 Connect the power and data cables to the rear of the drive. The connectors are shaped to go in one way only. 9 Reconnect the front panel cable, the CD-ROM drive cable (if you have a CD-ROM drive), and the floppy disk drive cable (if you have a floppy disk drive).
- Page 15 3 For improved access, remove the hard disk drive (described in this chapter). 4 Remove the CD-ROM’s data adaptor from the back of the CD-ROM drive. 5 Unfasten the four screws that secure the CD-ROM in position. HP NetVectra PC Replacing Hardware Components Replacing a Slim CD-ROM Drive English 15...
- Page 16 HP NetVectra PC Replacing Hardware Components Replacing a Slim CD-ROM Drive 6 Remove the old CD-ROM drive from the PC. 7 Remove the CD-ROM rail from the old CD-ROM drive and attach it to the new drive. 8 Insert the new CD-ROM drive.
- Page 17 5 Undo the three screws and remove the old floppy drive from the front chassis. 6 Remove the tray from the old floppy drive and attach it to the new drive using the screws provided. HP NetVectra PC Replacing Hardware Components Replacing a Slim Floppy Disk Drive English 17...
- Page 18 HP NetVectra PC Replacing Hardware Components Replacing a Slim Floppy Disk Drive 7 Slide the floppy drive into the front chassis and secure it with the three screws. 8 Replace the hard disk drive (described in this chapter). 9 Place the front chassis upside down on the rear of the NetVectra PC.
-
Page 19: Replacing An Accessory Board
3 Hold the old accessory board firmly and carefully pull it out. If you are installing an ISA accessory board, you may need to slide the front chassis forward to allow access (described in this chapter). HP NetVectra PC Replacing Hardware Components Replacing an Accessory Board English 19... - Page 20 HP NetVectra PC Replacing Hardware Components Replacing an Accessory Board 4 Align the board’s connector with the slot’s socket. Firmly press the board into the socket. Ensure that the board’s connector engages completely with the socket. 5 Close the retaining bracket and fasten the screw.
-
Page 21: Replacing The System Board
5 Install the connectors and components (described in this chapter) to the new system board. 6 Replace the front chassis and the cover (described in this chapter). HP NetVectra PC Replacing Hardware Components Replacing the System Board Removing the riser card... - Page 22 HP NetVectra PC Replacing Hardware Components Replacing the System Board 7 Ensure that the latest version of the BIOS is installed on your PC. To learn which BIOS version is currently installed on your PC, press during startup. To get the latest BIOS version for your PC, connect to the web site www.hp.com/go/vectrasupport...
-
Page 23: Replacing The Processor
8 Ensure that the latest version of the BIOS is installed on your PC. To learn which BIOS version is currently installed on your PC, press during startup. To get the latest BIOS version for your PC, connect to the web site www.hp.com/go/vectrasupport HP NetVectra PC Replacing Hardware Components Replacing the Processor English 23... -
Page 24: Replacing The Fan
HP NetVectra PC Replacing Hardware Components Replacing the Fan Replacing the Fan 1 Remove the computer’s cover and the front chassis (described in this chapter). 2 Remove the processor (described in this chapter). 3 Remove the old fan from the processor by unfastening the four screws that secure it in position. -
Page 25: Replacing The Power Supply
7 Replace the riser card and bracket (described in this chapter). 8 Fasten the two screws that secure the power supply in position. 9 Replace the front chassis and the computer’s cover (described in this chapter). HP NetVectra PC Replacing Hardware Components Replacing the Power Supply English 25... -
Page 26: Replacing The Internal Battery
HP NetVectra PC Replacing Hardware Components Replacing the Internal Battery Replacing the Internal Battery 1 Remove the computer’s cover (described in this chapter). 2 Remove the old battery by pressing the clip and then lifting the battery clear of the battery holder with a screwdriver (note the position of the cross). - Page 27 4 Insert the new status panel and fasten the screws. 5 Replace the plastic cover. 6 Replace the front chassis and the computer’s cover (described in this chapter). HP NetVectra PC Replacing Hardware Components Replacing the Status Panel English 27...