Page 1
Washer-Dryer User Manual HTV9746XMG Document Number : 2820528499_EN/ 20-05-20.(14:07)
Page 2
INFORMATION Dear Customer, • Important information or useful hints about Thank you for choosing a Beko product. We usage. hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology.
1 Important instructions for safety and environment 1.1.1 Electrical safety This section contains safety instructions that will help protect from risk of personal injury or property damage. Failure to follow DANGER! these instructions shall void any warranty. • If the product has a failure, it should 1.1 General safety not be operated unless it is repaired by the Authorised Service Agent.
1.1.2 Product safety INFORMATION DANGER! • Do not install or leave the product in places where it might be exposed to • Never open the loading door or remove outdoor conditions. the filter while there is still water in the •...
Page 5
CAUTION! DANGER! • Do not stop the machine before the • Rubber (latex) foam, shower caps, drying programme is completed. waterproof fabrics, clothes and If you have to do so, remove all rubber-reinforced/rubber-foam laundry, place it at an appropriate pillows must not be dried with the place and wait for it to cool down.
1.2 Intended use WARNING! INFORMATION • Before loading the machine, check each laundry item and make sure • This product has been designed for that there is no lighter, change, domestic use. It is not suitable for metal objects, needles etc. inside commercial use and it must not be them or in their pockets.
1.3 Children's safety Help protect the environment and natural resources by recycling used products. For children’s safety, cut the power CAUTION! cable and break the lock mechanism of the loading door to make the product • Children under the age of 3 must be non-functional before disposal.
2.2 Package contents Power cable Water discharge hose Transit bolts Mains water inlet hose Liquid detergent container (*) User manual Plastic plug group INFORMATION • Figures in this manual are schematic and may not match the product exactly. (*) This may be supplied with the machine depending on the model of your product. 8 / EN Washer-Dryer / User’s Manual...
• Do not place the product close to the 3 Installation edge if the floor contains steps. Do not also place the product on a platform. To make the product ready for use, review the • Do not place the product on the power cable. information in the user manual and make sure •...
1 Connect the special hose supplied 1 Use a tool to with the product loosen all bolts until to the water inlet they rotate freely. on the product. CAUTION! • Ensure that the cold water connection 2 Remove the transit is made correctly when installing the bolts by turning product.
90 cm 90 cm 90 cm 90 cm min.40 90 cm CAUTION! • Adjust feet so that the product will be balanced in the location it will be used. n.40 • Balance the machine by adjusting the feet. • Check for any play by pressing the •...
• The voltage specified in the “Technical 4 Preparation specifications” section must be equal to your mains voltage. 4.1 Sorting the laundry * Sort laundry according to type of DANGER! fabric, colour, degree of soiling and the suitable water temperature. •...
To prepare the product for washing INFORMATION laundry, perform first operation in Drum Cleaning programme. If this programme • Laundry that are subjected to materials is not available on your machine, apply such as flour, lime dust, milk powder, the method described in section 6.2. etc.
• Do not select a programme with prewash if you are using a detergent bag or dispensing INFORMATION ball. Place the detergent bag or the • The loading door is locked while a programme dispensing ball directly among the laundry is running.
4.7.5 Using softeners 4.7.7 Using gel and tablet detergent Pour the softener into the softener • If the gel detergent thickness is fluidal and compartment of the detergent drawer. your machine does not contain a special • Do not exceed the (>max<) level marking liquid detergent container, put the gel in the softener compartment.
4.7.10 Using limescale remover • Use just a little amount (approximately 50 ml) of bleach and rinse the clothes • When required, use limescale very well as it causes skin irritation. Do removers manufactured specifically not pour the bleach onto the laundry and for washing machines only.
4.9 Tips for correct drying Programmes Cottons Drying Synthetics Drying Babyprotect + Washing and Drying Wash&Wear Washes and dries Washes and dries respectively! Stainless clothes that has Sheet, bedding, baby respectively! Sheet, Sheet, bedding, baby clothes, been worn for a short time clothes, t-shirts, sweatshirts, bedding, baby clothes, t-shirts, sweatshirts, durable...
5.3 Preparing the Machine 5 Operating the product 1. Check if the hoses are connected tightly. 5.1 Control panel 2. Plug in your machine. 3. Turn the tap on completely. 4. Place the laundry in the machine. 5. Add detergent and fabric softener. 5.4 Selecting a washing programme 1.
Page 20
• Cottons • Woollens / Hand Wash You can wash your durable cotton laundry Use this programme to wash your woolen (sheets, bedlinen, towels, bathrobes, underwear clothes. Select the appropriate temperature etc.) in this programme. When you press the complying with the tag of your clothes. Your quick wash function key, programme duration laundry will be washed with very delicate becomes notably shorter but effective washing is...
Page 21
• Down Wear INFORMATION Use this programme to wash down coats, vests, jackets etc. that bear a “machine-washable” tag. • You can dry your laundry without any Thanks to special spin profiles, it is ensured that interruption right after the washing water reaches the air gaps between feathers.
• Towel Use this program to wash durable cotton INFORMATION laundry such as towels. Load the towels into the • You can dry your laundry without any machine paying attention to place them in a way interruption right after the washing that they will not contact the bellow or the glass.
Page 23
5.7 Spin speed selection You can also change the spin speed after the washing cycle has started. After the washing cycle has ended, you can press the spin speed adjustment button to select a spin speed. However, you need to do this before the spinning step begins.
• 5 kg Wash & Dry INFORMATION Use this programme to wash cotton laundry of up to 5 kg and to dry right after the washing • There is a spinning step in the drying programme without making any other selection. programmes.
• Hygiene+ Wash & Dry Applying a steam step at the beginning of the INFORMATION programme allows to soften the dirt easily. Use this programme to wash and quickly • The Hygiene+ programme has been tested and dry laundry (up to 2 kg) that requires anti- approved by the “British Allergy Foundation”...
Page 26
INFORMATION • The auxiliary functions in the table may vary according to the model of your machine. • Water and power consumption may vary subject to the changes in water pressure, water hardness and water temperature, ambient temperature, type and amount of laundry, selection of auxiliary functions and spin speed, and changes in the mains voltage.
5.11 Auxiliary function selection INFORMATION Select the desired auxiliary functions before starting the programme. When a programme is selected, • If the selected wetness level (Iron Dry, lights of the auxiliary functions that can be selected Cupboard Dry, Cupboard Extra Dry) together with that programme will turn on.
Page 28
• Remote Control • Anti-Crease+ If you press and hold the spin selection button You can use this auxiliary function button to connect your product to smart devices. for 3 seconds, this function will be selected and the programme follow-up light of the For detailed information, see HomeWhiz and the Remote Control Function.
5.12.3 Extra Dry • Bluetooth You can use the Bluetooth connection function Drying continues until the drying level to pair your machine with your smart device. reaches the Cupboard Extra Dry step. This way, you can use your smart device to get information about your machine and control it.
5.14 End Time 5.15 Starting the programme With the End Time function, start of 1. Press the Start/Pause button the programme can be delayed up to to start the programme. 24 hours. After pressing the End Time 2. The flashing light of the Start/Pause button, the programme's estimated end button will remain on, indicating that time will be displayed.
If the water level in the machine is not suitable when you press the Start/Pause button, the panel will warn you that the door is closed. 5.17.2 Switching the machine to pause mode • Turn off and unplug the appliance. •...
5.18 Cancelling the programme 5.21 HomeWhiz and the Remote Control Function HomeWhiz allows you to use your smart device to control your washing machine and get information about it. Thanks to the HomeWhiz application, you can use your smart device to carry out some procedures you can also do on the machine.
Page 33
5.21.1 HomeWhiz Setup INFORMATION Your product and the HomeWhiz app must be connected for the app to run. To • If you cannot complete the setup establish this connection, please follow successfully in 5 minutes, the washing the steps below for setup both on your machine will switch off automatically.
5.21.2 Setting up a washing WARNING! machine that is connected to someone else’s account • If the Bluetooth connection is enabled on your product, you can select the If the washing machine you want to use has Remote Control function. If the Remote previously been registered in the system Control function cannot be selected, with someone else’s account, you need...
In certain cases, it deactivates 6 Maintenance and cleaning itself for safety reasons: • When your washing machine Service life of product extends and frequently undergoes a power interruption. experienced problems will be reduced • When the programme knob is turned if it is cleaned at regular intervals.
2. Remove the nuts of the water intake After every washing and hoses to access the filters on the water drying make sure that intake valves. Clean residues on them no foreign substance with an appropriate brush. If the filters are is left in the drum.
2. Open the filter cover. Press the tab 7 Troubleshooting in the direction of the arrow and pull the cover out towards yourself. Programmes won’t start after the loading door has been closed. • You did not press the Start/Pause/Cancel button.>>> *Press the Start/Pause/Cancel button.
Page 38
Machine directly discharges the water it takes in. Programme time does not countdown. (*) • The drain hose might be at an inappropriate height. >>> • The laundry in the machine might be unbalanced. >>> The Connect the water drain hose as described in the user manual. automatic unbalanced load detection system might have been activated due to uneven distribution of the laundry in the drum.
Page 39
Colour of the clothes faded. (**) There is detergent left on the laundry. • Machine might have been overloaded. >>> Do not overload • Machine might have been overloaded. >>> Do not overload the machine. the machine. • Detergent used might be damp. >>> Keep detergents closed •...
Page 40
Machine does not start or programme cannot be started. • Power cable might be unplugged. >>> Make sure that the power cable is plugged in. • Programme might not be set, or the Start/Pause/ Cancel button might not be pressed. >>> Make sure the programme is set and the machine is not in Stand-by mode.