About Gateway Features - Cisco 3545 PRI Installation And Upgrade Manual
Cisco unified videoconferencing gateway releases 5.6 and 5.7
Hide thumbs
Also See for 3545 PRI:
- Online help manual (8 pages) ,
- Installation and upgrade manual (74 pages)
Table of Contents
Advertisement
About Gateway Features
About Gateway Features
Table 1-1
Table 1-1
Gateway Feature Summary
Feature
Interoperability
Web-based management
SNMP management
Diagnostics
Network load balancing
T.120 data collaboration
Quality of service (QoS)
Dial plan
Direct dialing and call routing
Access control
DTMF translation
Installation and Upgrade Guide for Cisco Unified Videoconferencing 3545 PRI Gateway and 3545 Serial Gateway Releases 5.6 and 5.7
1-2
lists the major features of the Cisco Unified Videoconferencing 3545 Gateway.
Description
The gateway provides a high degree of interoperability with other H.323
compliant gateways, gatekeepers, terminals, proxy, and Multipoint Control Unit
(MCU) products by being based on the H.320 standard and H.323 protocol stack.
The gateway features the gateway interface. This is a web interface used to
configure and monitor the gateway. You can view and modify all aspects of the
gateway configuration from a remote location using a Java-enabled web browser.
The gateway features Simple Network Management Protocol (SNMP)
management that supports all aspects of monitoring, diagnostics, configuration,
and trapping.
The gateway features front and rear panel LED indicators that display status for
the unit. You can also access remote diagnostics of the unit through the gateway
interface, Telnet, SNMP, or a serial port.
The gateway supports load balancing on the network by communicating with a
gatekeeper through H.323 RAI (Resource Available Indication)/RAC (Resource
Available Confirmation) messages.
The gateway supports data transfers in calls between ISDN and IP by using high
speed T.120 in HMLP and VarMLP formats.
The gateway features configurable coding of media packets to achieve QoS
routing priority on the Internet Protocol (IP) network. The Type of Service (ToS)
bits of the IP datagram header can be configured for priority level.
The gateway supports a simplified dial plan for outbound dialing using a single
universal prefix. Using the dial plan, the gateway automatically detects the
capabilities received in the Setup message from the IP endpoint and sets the same
bit rate for the ISDN (or serial interface) side of the call.
The gateway dial plan supports these direct dialing and call routing facilities:
Direct Inward Dialing (DID)
•
Multiple Subscriber Network (MSN)
–
Q.931 Sub-addressing Information Element
–
Cisco Unified Videoconferencing 3545 Serial Gateway supports DID in DCE
mode only.
Internal and External Interactive Voice Response (IVR)
•
TCS4
•
Default extension
•
The gateway features password-controlled access to the gateway interface. You
can define up to ten different administrator access profiles for the gateway.
The gateway supports translation between in-band Dual Tone Multi-Frequency
(DTMF) signals (on the ISDN side) and out-of-band H.245 messages (on the IP
side). DTMF translation occurs for voice and video calls.
Chapter 1
Functionality
OL-17011-01
Advertisement
Table of Contents
