hit counter script
Cisco AS5400 Installation Manual
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Gateway
  5. AS5400 Series
  6. Installation manual
Cisco AS5400 Installation Manual

Cisco AS5400 Installation Manual

Universal gateway card
Hide thumbs Also See for AS5400:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Configuration Manual, Quick Reference Manual
Cisco AS5350 and Cisco AS5400
Universal Gateway Card

Installation Guide

Corporate Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 526-4100
Customer Order Number: DOC-7813311=
Text Part Number: 78-13311-01

Advertisement

Table of Contents
loading

Related Manuals for Cisco AS5400

Summary of Contents for Cisco AS5400

  • Page 1: Installation Guide

    Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide Corporate Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 526-4100 Customer Order Number: DOC-7813311= Text Part Number: 78-13311-01...
  • Page 2 Modifications to this product not authorized by Cisco Systems, Inc. could void the FCC approval and negate your authority to operate the product. The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCB’s public domain version of the UNIX operating system.

  • Page 3: Table Of Contents

    C H A P T E R Overview Online Installation and Removal of the T1 or E1 DFC 78-13311-01 viii xiii xiii Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide C O N T E N T S...
  • Page 4 Using the Bantam Jacks for Test Port Functionality Monitoring Mode for the T1, E1 and T3 DFCs Drop and Insert Mode for the CT3 DFC Troubleshooting Network Interfaces Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide 3-11 3-11 3-11...
  • Page 5 8-Port T1 or E1 DFC Attaching the 8-Port Interface Cable to a Bracket (Optional) CT3 Cable and Port Pinouts Bantam Jack Port Pinouts I N D E X 78-13311-01 6-10 A-10 A-10 Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide Contents...
  • Page 6 Contents Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide 78-13311-01...

  • Page 7: Preface

    T1 or E1 DFC. Describes online insertion and removal (OIR) tasks you must perform on the T3 DFC. Describes online insertion and removal (OIR) tasks you must perform on the universal port DFC. Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide...

  • Page 8: Document Conventions

    This symbol means reader be careful. In this situation, you might do something that could result in Caution equipment damage or loss of data. Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide viii Title Description...
  • Page 9 La traduzione delle avvertenze riportate in questa pubblicazione si trova nel documento Regulatory Compliance and Safety Information (Conformità alle norme e informazioni sulla sicurezza) che accompagna questo dispositivo. 78-13311-01 Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide Document Conventions...
  • Page 10 Se förklaringar av de varningar som förkommer i denna publikation i dokumentet Regulatory Compliance and Safety Information (Efterrättelse av föreskrifter och säkerhetsinformation), vilket medföljer denna anordning. Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide 78-13311-01...

  • Page 11: Obtaining Documentation

    Preface Obtaining Documentation The following sections provide sources for obtaining documentation from Cisco Systems. World Wide Web You can access the most current Cisco documentation on the World Wide Web at the following sites: http://www.cisco.com • • http://www-china.cisco.com http://www-europe.cisco.com •...

  • Page 12: Obtaining Technical Assistance

    If you cannot resolve your technical issue by using the TAC online resources, Cisco.com registered users can open a case online by using the TAC Case Open tool at the following website: http://www.cisco.com/tac/caseopen Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide Preface 78-13311-01...

  • Page 13: Related Documentation

    No workaround is available. Related Documentation This guide describes how to install and connect the Cisco AS5350 and Cisco AS5400 dial feature cards. You will also need the following publications to configure the dial feature cards: Refer to the Cisco AS5350 Universal Gateway Regulatory Compliance and Safety Information •...
  • Page 14 Preface New Hardware Features Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide 78-13311-01...

  • Page 15: Chapter 1 Safety Warnings, Recommendations, And Tools Required

    To see translations of the warnings that appear in this publication, refer to the Regulatory Compliance and Safety Information document that accompanied this device. 78-13311-01 C H A P T E R Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide...

  • Page 16: Maintaining Safety With Electricity

    Determine if the person needs rescue breathing or external cardiac compressions; then take – appropriate action. Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide Chapter 1 Safety Warnings, Recommendations, and Tools Required 78-13311-01...

  • Page 17: Preventing Electrostatic Discharge

    Straight through RJ-45-to-RJ-45 cable for CT1/CE1 connections • 75-ohm coaxial cable for a CT3 connection • PC running terminal emulation software for local administrative access • • Modem for remote administrative access 78-13311-01 Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide Preventing Electrostatic Discharge...

  • Page 18: Where To Go Next

    Chapter 4, “T3 Dial Feature Card” • Chapter 5, “Universal Port Dial Feature Card” • Chapter 6, “Troubleshooting” • Appendix A, “Cabling Specifications” • Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide Chapter 1 Safety Warnings, Recommendations, and Tools Required 78-13311-01...

  • Page 19: Chapter 2 Dial Feature Card And Carrier Card Guidelines

    One backplane slot accepts one dial feature card (DFC) carrier card and the other backplane slot accepts one DFC. Cisco AS5400 Chassis The Cisco AS5400 universal gateway chassis has a motherboard, high-speed backplane, and four backplane slots. Three backplane slots accept DFC carrier cards and the other backplane slot accepts one DFC.

  • Page 20: Online Insertion And Removal (Oir) Of Dfcs

    • Online Insertion and Removal (OIR) of DFCs All DFCs on the Cisco AS5350 and Cisco AS5400 chassis support online insertion and removal (also known as hot swapping). You can install, remove, replace, and rearrange the DFCs without turning off the chassis power.

  • Page 21: Removing A Populated Carrier Card

    Loosen the Captive Screws on the Cisco AS5350 Captive screw 78-13311-01 Chapter 1, “Safety Warnings, Recommendations, and Tools Figure 2-3.) Carrier card Captive screw Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide Removing and Installing Populated Carrier Cards Chassis...
  • Page 22 Removing the Carrier Card from the Cisco AS5400 After you remove the carrier card from the chassis, set it aside on an ESD-preventive mat. Step 5 Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide Carrier card Chapter 2...

  • Page 23: Installing A Populated Carrier Card

    Install the Carrier Card in the Cisco AS5400 Align the captive screws with their holes, and seat the card completely. Step 2 78-13311-01 Figure 2-6.) Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide Removing and Installing Populated Carrier Cards Figure 2-7...
  • Page 24 Figure 2-9 Tighten the Captive Screws on the Cisco AS5350 Captive screw Figure 2-10 Tighten the Captive Screws on the Cisco AS5400 Captive screw If the carrier card has a blank DFC slot, install a blank cover over the open DFC slot to ensure proper Step 4 airflow inside the chassis.

  • Page 25: Getting Help

    Chapter 4, “T3 Dial Feature Card.” • Chapter 5, “Universal Port Dial Feature Card.” • Chapter 6, “Troubleshooting.” • Appendix A, “Cabling Specifications.” • 78-13311-01 in the “Preface.” Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide Getting Help...
  • Page 26 Chapter 2 Dial Feature Card and Carrier Card Guidelines Where to Go Next Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide 78-13311-01...

  • Page 27: Chapter 3 T1 And E1 Dial Feature Cards

    HDLC controllers to terminate digital (ISDN) calls. For network specifications see Table 3-2. You can use the bantam ports on the DFC to monitor a line. The Cisco AS5350 and Cisco AS5400 support only one type of WAN DFC at a time. Refer Note Chapter 6, “Troubleshooting”...
  • Page 28 Description Line rate Data rate (per port) number x 56 or number x 64 kbps, where number = 1 to 31. Input impedance Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide Bantam ports 4 PRI MAIN T Specification 1.544 Mbps...

  • Page 29: Online Installation And Removal Of The T1 Or E1 Dfc

    If you replace the existing DFC with a new DFC of a different type, you will have to reconfigure the system. For configuration details, refer to the Cisco AS5350 and Cisco AS5400 Universal Gateway Software Configuration Guide.
  • Page 30 Compliance and Safety Information document that accompanied this device. Disconnect all interface cables from the DFC and secure them out of the way. Step 7 Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide Slot 0 Slot 1 Slot 3...
  • Page 31 Avoid touching any pins or circuit board components during removal and installation of a DFC. Caution 78-13311-01 Figure 3-7.) 2 PRI Captive screw Carrier card Captive screw 3-9.) Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide Online Installation and Removal of the T1 or E1 DFC Chassis...
  • Page 32 :s s p p p p p p p p p p p p p n p p p p p p p p p p p p p p p Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide...
  • Page 33 2/73 active 2/65 active 2/57 active 2/49 active 2/41 active 2/33 active 2/25 active 2/17 active 2/09 active 2/01 active 1/107 active 1/99 active 1/91 active Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide txA txB txC txD...
  • Page 34 DFC type is E1 8 PRI DFC OIR events: Number of insertions = 1, Number of removals = 1 DFC State is DFC_S_OPERATIONAL Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide Chapter 3 T1 and E1 Dial Feature Cards 78-13311-01...

  • Page 35: Installing The T1 Or E1 Dfc

    DFC of a different type, you will have to reconfigure the system. For configuration details, refer to the Cisco AS5350 and Cisco AS5400 Universal Gateway Software Configuration Guide. To install the T1 or E1 DFC, follow these steps: Step 1 Attach an ESD preventive wrist strap.
  • Page 36 Online Installation and Removal of the T1 or E1 DFC Figure 3-12 Install the T1 or E1 DFC in the Cisco AS5400 Align the captive screws with their holes, and seat the card completely. Step 3 Tighten the screws to secure the DFC to the chassis. (See...

  • Page 37: Configuring Input Impedance For The E1 Dfc

    Chapter 3 T1 and E1 Dial Feature Cards For information about configuring the T1 or E1 ports, refer to the Cisco AS5350 and Cisco AS5400 Note Universal Gateway Software Configuration Guide. Configuring Input Impedance for the E1 DFC Use the line-termination command to set the input impedance for the E1 DFC.
  • Page 38 6 pri-group timeslots 1-31 controller E1 7 clock source line secondary 7 pri-group timeslots 1-31 interface Ethernet0 ip address 1.6.44.2 255.255.255.0 no ip directed-broadcast no ip route-cache Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide 3-12 78-13311-01...
  • Page 39 10 in interface Serial3:15 no ip address no ip directed-broadcast isdn switch-type primary-5ess no cdp enable hold-queue 10 in Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide 3-13 78-13311-01...

  • Page 40: Getting Help

    Chapter 5, “Universal Port Dial Feature Card.” Chapter 6, “Troubleshooting.” • Appendix A, “Cabling Specifications.” • Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide 3-14 igrp any any in the “Preface.” Chapter 3 T1 and E1 Dial Feature Cards...

  • Page 41: Chapter 4 T3 Dial Feature Card

    You can install a T3 DFC in any DFC slot of the universal gateway chassis. The Cisco AS5350 and Cisco AS5400 support only one type of WAN DFC at a time. Refer Note Chapter 6, “Troubleshooting,”...

  • Page 42: Online Installation And Removal (Oir) Of The T3 Dfc

    If you replace the existing DFC with a new DFC of a different type, you will have to reconfigure the system. For configuration details, refer to the Cisco AS5350 and Cisco AS5400 Universal Gateway Software Configuration Guide.
  • Page 43 Slot 2 Slot 3 Slot 5 Slot 7 slot-number slot-number slot-number/control-number slot-number/port number Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide Online Installation and Removal (OIR) of the T3 DFC timeslot-number timeslot Chapter 3, “T1 and E1 Dial...
  • Page 44 Grasp the ventilated metal cover with your other hand to support and guide the DFC out of the slot. (See Figure 4-6 Figure Caution Avoid touching any pins or circuit board components during removal and installation of the DFC. Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide Figure 4-5.) Captive screw...

  • Page 45: Installing The T3 Dfc

    If you replace the existing DFC with a new DFC of a different type, you will have to reconfigure the system. For configuration details, refer to the Cisco AS5350 and Cisco AS5400 Universal Gateway Software Configuration Guide. 78-13311-01...
  • Page 46 Figure 4-9 Figure 4-9 Install the T3 DFC in the Cisco AS5350 Figure 4-10 Install the T3 DFC in the Cisco AS5400 Align the captive screws with their holes, and seat the card completely. Step 3 Tighten the screws to secure the DFC to the chassis. (See...

  • Page 47: Getting Help

    Chapter 4 T3 Dial Feature Card Figure 4-12 Tighten the Captive Screws on the Cisco AS5400 Captive screw Check the card LEDs to verify that the card is working properly. For information about dial feature card Step 5 LEDs, refer to...

  • Page 48: Where To Go Next

    Chapter 4 T3 Dial Feature Card Where to Go Next Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide 78-13311-01...

  • Page 49: Chapter 5 Universal Port Dial Feature Card

    You can install a universal port DFC in any DFC slot of the universal gateway chassis. The universal port DFC does not require external connections. (See Figure 5-1 Universal Port DFC 78-13311-01 C H A P T E R Figure Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide 5-1.)

  • Page 50: Online Insertion And Removal (Oir) Of The Universal Port Dfc

    If you replace the existing DFC with a new DFC of a different type, you will have to reconfigure the system. For configuration details, refer to the Cisco AS5350 and Cisco AS5400 Universal Gateway Software Configuration Guide. For information on voice and fax commands, refer to the Monitoring Voice and Fax Services on the Cisco AS5350 and Cisco AS5400 Universal Gateways document.
  • Page 51 Disconnect all interface cables from the DFC. Step 7 78-13311-01 Online Insertion and Removal (OIR) of the Universal Port DFC Slot 0 Slot 1 Slot 2 Slot 3 Slot 5 Slot 7 slot-number slot-number slot-number/port number Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide...
  • Page 52 Grasp the ventilated metal cover with your other hand to support and guide the DFC out of the slot. (See Figure 5-6 Figure Figure 5-6 Remove the DFC from the Cisco AS5350 Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide Figure 5-5.) Carrier card Captive...
  • Page 53 DFC type is NP108 DFC OIR events: Number of insertions = 0, Number of removals = 0 DFC State is DFC_S_OPERATIONAL 78-13311-01 Online Insertion and Removal (OIR) of the Universal Port DFC Figure 5-8.) Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide...
  • Page 54 1 00:16:37.843:%NP_BS-6-MODULE_STARTED:NextPort module 3/0/1 Started - 1.1.3.77 *Jan 1 00:16:40.615:%NP_MD-6-MODULE_UP:NextPort module 3/0/0 up Router# *Jan 1 00:16:41.847:%NP_BS-6-MODULE_STARTED:NextPort module 3/0/2 Started - 1.1.3.77 Router# Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide Chapter 5 Universal Port Dial Feature Card 78-13311-01...

  • Page 55: Installing The Universal Port Dfc

    DFC of a different type, you will have to reconfigure the system. For configuration details, refer to the Cisco AS5350 and Cisco AS5400 Universal Gateway Software Configuration Guide. To install the universal port DFC, follow these steps: Attach an ESD preventive wrist strap.
  • Page 56 Step 5 Figure 5-11 Tighten the Captive Screws on the Cisco AS5350 Captive screw Figure 5-12 Tighten the Captive Screws on the Cisco AS5400 Captive screw Step 6 Check the card LEDs to verify that the card is working properly. For information about dial feature card LEDs, refer to Chapter 6, “Troubleshooting”...

  • Page 57: Spe Firmware

    Cisco AS5400 Universal Gateway Software Configuration Guide. For information on managing universal port services, refer to Managing Port Services on the Cisco 5350 Universal Gateway and Managing Port Services on the Cisco AS5400 Universal Gateway. Getting Help For information about technical support, onsite service, and exchange and repair services, refer to the “Obtaining Technical Assistance”...
  • Page 58 Chapter 5 Universal Port Dial Feature Card Where to Go Next Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide 5-10 78-13311-01...

  • Page 59: Leds

    6-4), note any fault condition that the product is encountering, and then Table 6-1 ACTIVITY (ACT) OK/MAINT Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide C H A P T E R “Obtaining Technical for a description of the LEDs.

  • Page 60: Leds

    8-Port T1 or E1 DFC LEDs Figure 6-3 T3 DFC LEDs Loop Figure 6-4 Universal Port DFC LEDs Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide Local alarm, ACTIVITY (ACT) Remote alarm, or Loopback LED for OK/MAINT each T1/E1 port...
  • Page 61 Yellow Remote Alarm On (Yellow) (RA), Local Alarm (LA), or Loopback (LB) Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide LEDs Description Indicates DFC is up and running. Indicates DFC is not yet fully functional. The T1 or E1 DFC has passed initial power-up diagnostics tests and is operating normally.
  • Page 62 LEDs Table 6-1 LEDs (continued) T3 DFC Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide State ACTIVITY (ACT) Fast flicker Slow flicker OK/MAINT On (Green) Yellow M13 Alarm (MA) Remote Alarm (RA) Local Alarm (LA) T3 EN/DIS Green...

  • Page 63: Mixing Wan Dfcs

    1. To display information about an M13 alarm, use the show CT3 EXEC command. Mixing WAN DFCs The Cisco AS5350 and Cisco AS5400 support only one type of WAN DFC at a time. The DFCs that can be installed at one time are: •...

  • Page 64: Environment Monitoring

    Environment Monitoring Overview The Cisco AS5350 and Cisco AS5400 contain temperature sensors to detect abnormal temperature conditions during system operation. The three levels of sensor detection are as follows: When the operating temperature of the system exceeds 45° C, the system reaches a warning state. A warning message appears on the console.

  • Page 65: Displaying Environment Status

    RPS Input Voltage status: normal RPS Output Voltage status: normal RPS Fan status: normal RPS Thermal status: normal RPS OverVoltage status: normal Temperature:sensor failed. Fans:monitor dropped. Temperature:warning. Temperature:sensor recovered. Fans:monitor recovered. Fans:normal. Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide Environment Monitoring...
  • Page 66 Router> show environment Temperature: Fans: Power Supply: Environmental monitor experienced the following events: Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide Temperature Reading: Temperature at inlet is measured as 62C/143F. Temperature at outlet is measured as 74C/165F. Temperature State: Temperature is in critical state.

  • Page 67: Using The Bantam Jacks For Test Port Functionality

    Use software commands to select a T1 line. For information on software commands, see the Cisco AS5350 and Cisco AS5400 Universal Gateway Software Configuration Guide for details. Passive monitoring equipment is used to listen on the TX MON and RX MON jacks during regular operation to detect T1 errors.

  • Page 68: Troubleshooting Network Interfaces

    Documentation CD-ROM that shipped with your universal gateway. Getting Help For information about technical support, onsite service, and exchange and repair services, refer to the “Obtaining Technical Assistance” section on page -xii Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide 6-10 Chapter 6 Troubleshooting in the “Preface.”...
  • Page 69 Table A-1 T1 or E1 Port Pinouts RJ-45 Pin Description RX Tip RX Ring RX Shield TX Tip TX Ring TX Shield 78-13311-01 A P P E N D I X Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide...
  • Page 70 J1-1 J1-2 J1-3 J1-4 J1-5 J1-6 Figure A-2 Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide Figure A-5 show the types of cables that can connect to the RJ-45 connector on the RJ-45-to-DB-15 Cable Assembly Signal Description Ground...
  • Page 71 RJ-45-to-RJ-45 Cable Assembly RJ-45-to-RJ-45 TE Cable Pinouts Signal Description Ground Shell/Braid RX Tip Twisted Pair #1 Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide T1 and E1 Cable and Port Pinouts Direction BNC Pin RX, TX Shields <— RX-Tip <—...
  • Page 72 RJ-45 Pin Shield J1-1 J1-2 J1-3 J1-4 J1-5 J1-6 Figure A-5 Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide Signal Description RX Ring Twisted Pair #1 RX Shield Twisted Pair #3 TX Tip Twisted Pair #2 TX Ring...
  • Page 73 CAB-E1-RJ45DB15N 72-1338-01 CAB-E1-RJ45BNC 72-1339-01 CAB-E1-RJ-45TWIN 72-1340-01 CAB-E1-RJ45TE 72-1341-01 CAB-E1-RJ45NT 72-1342-01 CAB-E1-RJ45RJ45 72-1343-01 CAB-T1-RJJ45BARE Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide T1 and E1 Cable and Port Pinouts Direction Bare <— WIRE-1 <— WIRE-2 —> WIRE-3 —> WIRE-4...
  • Page 74 RX_TIP J1-18 RX_RING J1-19 TX_TIP J1-20 TX_RING J1 connector is male 36 position plug, J2-J9 connectors are female RJ-45 receptacles Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide Note Direction SHELL/BRAID Twisted Pair #1 <------ Port 7 <------ Twisted Pair #1 <------...
  • Page 75 ------> Twisted Pair #2 ------> Port 1 ------> Twisted Pair #2 ------> Port 0 ------> Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide T1 and E1 Cable and Port Pinouts Signal TX_TIP J8-4 TX_RING J8-5 TX_TIP J7-4 TX_RING...
  • Page 76 RJ-45 end of the cable with the holes on the bracket. (See Figure A-7.) Figure A-7 Placing the Molded RJ-45 End of the Cable on the Bracket Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide 78-13311-01...
  • Page 77 (See Figure A-8 Routing Cables with Molded RJ-45 Ends of Cables Next to Each Other 78-13311-01 Attaching the 8-Port Interface Cable to a Bracket (Optional) Figure A-8.) Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide...
  • Page 78 This placement creates space between each adjacent molded RJ-45 end. Route the cables through this space. (See Figure A-9.) Figure A-9 Routing Cables with Molded RJ-45 Ends of Cables Flush with Bracket Edges Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide A-10 78-13311-01...
  • Page 79 Use the end screws on the bracket to secure the cable bracket to the rack. (See Step 4 78-13311-01 Attaching the 8-Port Interface Cable to a Bracket (Optional) Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide Figure A-10.) A-11...
  • Page 80 36-pin cable connector to secure the cable to the AS54-DFC-8CT1/CE1 card. (See Figure A-11.) Figure A-11 Connecting the 36-Pin Cable Connector to an 8-Port T1 DFC Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide A-12 78-13311-01...

  • Page 81: Bantam Jack Port Pinouts

    Table A-13 Bantam Jack Port Pinouts 78-13311-01 Description Rx signal Ground Tx signal Ground Description Ring Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide CT3 Cable and Port Pinouts Table A-12 for the CT3 cable A-13...
  • Page 82 Appendix A Cabling Specifications Bantam Jack Port Pinouts Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide A-14 78-13311-01...
  • Page 83 Dial Feature Cards, overview documentation, getting document organization document organization (table) documents, related drop and insert mode for the CT3 DFC Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide I N D E X viii 3-11 A-10 A-10...
  • Page 84 Install the DFC in the Cisco AS5400 Install the T1 or E1 DFC in the Cisco AS5350 Install the T1 or E1 DFC in the Cisco AS5400 Install the T3 DFC in the Cisco AS5350 Install the T3 DFC in the Cisco AS5400...

  • Page 85: Installing The T3 Dfc

    Install the DFC in the Cisco AS5400 (figure) Install the T1 or E1 DFC in the Cisco AS5350 (figure) Install the T1 or E1 DFC in the Cisco AS5400 (figure) 3-10 Install the T3 DFC in the Cisco AS5350 (figure)
  • Page 86 Note viii Timesaver viii Tips Warning Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide IN-4 T1 and E1 Cable and Port Pinouts T1 and E1 Cable Assemblies (table) T1 network specifications (table) T1 or E1 DFC, overview T1 or E1 DFCs (table)
  • Page 87 2-3, 3-4, 3-9, 4-3, 4-5, 5-3, 5-7 power supply disconnection product disposal remove jewelry telecommunications lines Warning symbol, meaning of 78-13311-01 3-11 Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide Index IN-5...
  • Page 88 Index Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide IN-6 78-13311-01...

This manual is also suitable for:

As5350

Table of Contents

Save PDF