Table of Contents
Advertisement
Available languages
Available languages
General
WARNING! The user must only carry out the maintenance and service work described in this
!
Operator's Manual. More extensive work must be carried out by an authorized service workshop.
Inspection and/or maintenance should be carried out with the motor switched off and the plug
disconnected.
Wear personal protective equipment. See instructions under the "Personal protective equipment"
heading.
The life span of the machine can be reduced and the risk of accidents can increase if machine
maintenance is not carried out correctly and if service and/or repairs are not carried out
professionally. If you need further information please contact your nearest service workshop.
Let your Husqvarna dealer regularly check the machine and make essential adjustments and repairs.
Maintenance schedule
In the maintenance schedule you can see which parts of your machine that require maintenance, and with which
intervals it should take place. The intervals are calculated based on daily use of the machine, and may differ depending
on the rate of usage.
Cleaning
Functional inspection
*See instructions in the section "Machine's safety equipment".
** See instructions in the section "Blades" and "Assembly and settings".
Cleaning
External cleaning
•
Clean the machine daily by rinsing it with clean water after the work is finished.
WARNING! Do not use high-pressure
!
washers to clean the machine.
22 – English
MAINTENANCE
Daily maintenance
External cleaning
General inspection
Water system
Throttle trigger*
Throttle lockout*
Blade guard*
Blade**
Support and guide rollers
Weekly maintenance/40
hours
Vibration damping
system*
Drive belt
Monthly maintenance
Drive wheel
Advertisement
Chapters
Table of Contents
