Download Print this page

Fig. 20: Tightening Pressure Screws; Table 7: Torque-Controlled Tightening Of The Pressure Screws - ABB HT612570 Operation Manual

Table of Contents

Operation Manual / A130-H.. - A140-H..

3 Removing and Installing / 3.3 Installing the turbocharger

Tightening pressure screws

Fig. 20: Tightening pressure screws

Product

A140

Table 7: Torque-controlled tightening of the pressure screws

1. Screw in pressure screws crosswise by hand until reaching the stop.

2. Tighten pressure screws crosswise to 50 % of the tightening torque specified in the

table.

3. Tighten pressure screws crosswise to 100 % of the tightening torque specified in the

table.

4. Work in a circle to tighten all pressure screws to 100 % of the tightening torque specified

in the table.

5. Tighten pressure screws to 100 % in 5 ... 7 rounds until the required residual tightening

angle of < 20° is achieved.

Fixing screw [mm]

M24

HZTL4030_EN

Tightening torques [Nm]

Rev.G

July 2021

Table of Contents

Chapters

Table of Contents

A140-h56