SERVICE MANUAL
Ver. 1.1 2005.06
• STR-K1000P is the tuner and the amplifier
section in HT-DDW1000.
Manufactured under license from Dolby Laboratories.
"Dolby", "Pro Logic" and the double-D symbol are trademarks of
Dolby Laboratories.
"DTS" and "DTS Digital Surround" are registered trademarks of
Digital Theater Systems, Inc.
Amplifier section
1)
Power Output
Models of area code SP, MX, E51
(6 ohms 1 kHz, THD 0.7%)
2)
FRONT
:
80 W/ch
2)
CENTER
:
80 W
2)
SURR
:
80 W/ch
2)
SURR BACK
:
80 W
(6 ohms 1 kHz, THD 10%)
2)
FRONT
:
130 W/ch
2)
CENTER
:
130 W
2)
SURR
:
130 W/ch
2)
SURR BACK
:
130 W
Models of area code AUS
(6 ohms 120 Hz – 20 kHz, THD 0.09%)
2)
FRONT
:
70 W/ch
2)
CENTER
:
70 W
2)
SURR
:
70 W/ch
2)
SURR BACK
:
70 W
(6 ohms 1 kHz, THD 0.7%)
2)
FRONT
:
80 W/ch
2)
CENTER
:
80 W
2)
SURR
:
80 W/ch
2)
SURR BACK
:
80 W
(6 ohms 1 kHz, THD 10%)
2)
FRONT
:
130 W/ch
2)
CENTER
:
130 W
2)
SURR
:
130 W/ch
2)
SURR BACK
:
130 W
Sony Corporation
9-879-636-02
Audio Group
2005F16-1
Published by Sony Engineering Corporation
© 2005.06
STR-K1000P
SPECIFICATIONS
1) Measured under the following conditions:
Area code
Power requirements
SP, SP6
230 V AC, 50 Hz
AUS, E51
240 V AC, 50 Hz
MX
127 V AC, 60 Hz
2) Depending on the sound field settings and the
source, there may be no sound output.
Inputs (Analog)
MULTI CH IN,
Sensitivity: 800 mV
SA-CD/CD, MD/TAPE,
Impedance: 50 k ohms
DVD, VIDEO 1, 2, 3
Inputs (Digital)
DVD (Coaxial)
Sensitivity: –
Impedance: 75 ohms
VIDEO 2, SA-CD/CD
Sensitivity: –
(Optical)
Impedance: –
Outputs (Analog)
MD/TAPE (OUT),
Voltage: 800 mV
VIDEO 1 (AUDIO OUT)
Impedance: 10 k ohms
SUB WOOFER
Voltage: 2 V
Impedance: 1 k ohm
Reproduction frequency range:
28 – 20,000 Hz
Australian Model
Tone
Gain levels
FM tuner section
Tuning range
Antenna
Antenna terminals
Intermediate frequency
AM tuner section
Tuning range
Models of area code SP, SP6, AUS
With 9-kHz tuning scale: 531 – 1,602 kHz
Models of area code E51
With 10-kHz tuning scale: 530 – 1,610 kHz
With 9-kHz tuning scale: 531 – 1,602 kHz
Models of area code MX
With 10-kHz tuning scale: 530 – 1,610 kHz
Antenna
Intermediate frequency
3) You can change the AM tuning scale to 9 kHz or 10
kHz. After tuning in any AM station, turn off the
receiver. While holding down PRESET TUNING +
or TUNING +, press ?/1. All preset stations will be
erased when you change the tuning scale. To reset
the scale to 10 kHz (or 9 kHz), repeat the procedure.
FM STEREO FM-AM RECEIVER
E Model
±6 dB, 1 dB step
87.5 - 108.0 MHz
FM wire antenna
75 ohms, unbalanced
10.7 MHz
3)
3)
Loop antenna
450 kHz
– Continued on next page –