hit counter script

Advertisement

The manufacturer reserves the right to change and release product firmware
updates and to keep this manual up to date.
https://www.okai.co

Advertisement

Table of Contents
loading

Summary of Contents for OKAI ES30L

  • Page 1 The manufacturer reserves the right to change and release product firmware updates and to keep this manual up to date. https://www.okai.co...
  • Page 2 ES30L Instruction Manual...
  • Page 3: Table Of Contents

    Contents 1.Introduction 1-1.Technical Data 1-2.Symbol Explanations 1-3.List of finished product and parts 2.Intended Use 3.Safety Instructions 3-1.Safety instructions 3-2.Battery safety precautions 3-3. Safety instructions for battery charger 4.How To Use 4-1.Using the product for the first time 4-2.Ride preparation 5.Maintenance,Cleaning and Service 5-1.Maintain 5-2.Clean 5-3.Storage and transportation...
  • Page 4: Introduction

    Failure to comply with this user manual may cause serious injury to people or cause damage to the product. OKAI does not assume any responsibility for this. In order to be concise and easy to read, the OKAI E-Scooter will be referred to as “product” in the following Content.
  • Page 5: 1-1.Technical Data

    1-1.Technical Data Item Content ES30L Dimensions(Unfolding):length,width,height 1168*450*1156(mm) Dimensions(folding):length,width,height 1168*450*430(mm) N.W. 20kg Maximum Speed 25km/h *Range 45km Specifications Maximum Gradient Adapted Terrain Flat /Mountain Operating Temperature 0~40℃ —20~45℃ Storage Temperature Finished product IP55 IP Rating Charging Time 2A<6h Rated Voltage Rated Capacity 9.8Ah (13 series 2 parallel)...
  • Page 6 Item Content ES30L Braking Distance <10m Brake Front: electronic brake Brake Type rear: disc brake Tire Size Front and rear wheel: 10inch Tire Tire Material Vacuum Tire Input Voltage 100-240V Output Voltage 54.6V Charger Output current Minimum Load 40kg User...
  • Page 7: 1-2.Symbol Explanations

    1-2.Symbol Explanations DANGER Indicates a hazard signal with a high degree of danger. If not avoided, death or serious injury may occur. WARNING A hazard signal that indicates a moderate hazard. If not avoided, death or serious injury may occur. CAUTION A hazard signal that indicates a lower hazard.
  • Page 8: 1-3.List Of Finished Product And Parts

    1-3.List of finished product and parts Meter Grips Bell Speed up Headlight Brake lever Hook up Foldable Front tube Charging port Straight tube ambient light Rear light Rear fender Disc brake Folder Front fork Frame Kickstand Front Mudguard Side reflector 10in Wheel Hub Motor Size: length 1168*width 450*height 1156mm...
  • Page 9: Intended Use

    China, please be sure to comply with the safety requirements for drivers in this manual. Zhejiang Okai Vehicle Co., Ltd will not bear any direct or joint liabilities for any financial losses, losses of life, legal disputes, or any other unfavorable events that occur due to the violation of the recommended uses indicated in this manual.
  • Page 10 5. Keep a distance of at least 1m/3ft from pedestrians, other vehicles and any obstacles. 6. This product can only be used when the environment permits it and the personalsafety of bystanders is guaranteed. 7. Pay attention to the obstacles in front and of those far away. 8.
  • Page 11 38. When riding, the noise should not exceed 70dB. 39. When using the product, users must wear shoes. 40. This appliance can be used by children aged from 14 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
  • Page 12: 3-2.Battery Safety Precautions

    3-2 Battery safety precautions ·The battery should not be exposed to excessive heat such as sunlight, fire or the like. Otherwise there will be a risk of explosion! ·If this product is not used for more than 30 days, please fully charge the battery. ·Fully charge the battery every 90 days.
  • Page 13: How To Use

    4.How to use 4-1 Using the product for the first time This section provides information on how to use the product correctly. To ensure user safety and service life, it is important to follow these instructions. 1.Take out the manual, charger and accessory bag. 2.Take the front and rear foam out of the carton.
  • Page 14 3.Remove the car head from the middle foam, after the wiring harness connection is completed, lift up the front tube, then insert the car head into the front tube and tighten it with screws, and then tighten the embrace hoop. 4.Lift up the front tube,...
  • Page 15 5.Remove the scooter from the carton. 6.Uncover the protective cover of the charging port, connect the charger, plug in the power source to charge and activate the vehicle. Plug in power Charging port Connect to the vehicle charging port Note: For first use, please connect the charger to activate vehicle.
  • Page 16 7.NFC key card:In the off state, the NFC key card is close to the screen to turn on and unlock; in the power on state, the NFC key card is close to the screen, shut down and lock the scooter; Function button:...
  • Page 17 8.Wear a helmet and protective gear. 9.Please check the vehicle before each use. Press the brake lever to confirm that braking power is If the folding pole is loose normal. and shaking, tighten as soon as possible using stacker fixing screws. 10.After there is an initial speed through 11.Release the acceleration handle to reduce pedalling,use the throttle to accelerate.
  • Page 18 12.To change the center of gravity when 13.When you need to stop, release the turning, turn the handle slightly. acceleration handle to reduce speed, squeeze and brake the handlebar. Lay down the foot support and let the vehicle lean slightly in the foot support direction so that the foot support touches the ground, and the vehicle can be stabilized.
  • Page 19 15.Folding operation ①Hold the front tube, press the folding handle down and then open it outwards; ②Put down the front tube, the front ③Hold the fronttube to lift the electric tube is automatically locked; scooter.
  • Page 20 16.Activate the app Please scan the QR code to download the app (the system version and Bluetooth version are subject to the actual requirements of the app). You can find the cruise control function in the app, and discover more ways to use the scooter. ①Install APP, please register/login ②...
  • Page 21: 4-2.Ride Preparation

    4-2 Ride preparation Checklist: ·Wheels - check that the wheels are not damaged or excessively worn. ·Loose parts - make sure that all parts, such as nuts, bolts and fasteners are safe. Parts should not make any abnormal sounds. ·Operating area-make sure that the operating area is open and flat without any obstacles. ·Laws and requirements - check and comply with any local laws or regulations.
  • Page 22: 5-3.Storage And Transportation

    5-3.Storage and transportation ·Store the product in a dry, clean place, out of the reach of children, preferably in the original packaging. ·During transportation, turn off the product. ·The product can only be shipped in its original packaging. Don't throw away the packaging because shipping the product may be required in the future.
  • Page 23: Explanation Of Error Codes

    7.Explanation of error codes Error Error name The reason Troubleshooting method number The instantaneous output Overcurrent The controller output current is less current of the controller exceeds protection than 22A and then recovers the current limit range(>22A) 1. The fault is resolved automatically Undervoltage When the battery voltage is after charging...

Table of Contents