hit counter script
Download
Share
Print this page
Cisco 7600 User Manual
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Network Router
  5. 7600 Series
  6. User manual

Cisco 7600 User Manual

Cisco systems network router user manual
Hide thumbs Also See for 7600:

Advertisement

Quick Links

Download this manual See also: Configuration Manual, Installation Manual
Overview: Cisco 7600 Series SIPs
This chapter describes the SPA interface processors (SIPs) that are supported on the Cisco 7600 series
routers and contains the following sections:
•
•
•
•
•
•

SIP Summary

Summary descriptions of the SIPs that are supported on the Cisco 7600 series routers are shown in
Table
The Description column indicates the aggregate bandwidth supported by the SIP across all subslots-not
Note
per SPA subslot.
Table 2-1
SIP Summary
SIP
Product Number
Cisco 7600 SIP-200 7600-SIP-200
Cisco 7600 SIP-400 7600-SIP-400
Cisco 7600 SIP-600 7600-SIP-600
Cisco 7600 SSC-400 7600-SSC-400
OL-5052-14
SIP Summary, page 2-1
2-1.
Description
622-Mbps SPA interface
processor
2.5-Gbps SPA interface
processor
1 x 10-Gbps SPA Interface
Processor
SPA services carrier
C H A P T E R
Maximum
Number of
SPAs
4
4
1
2
Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
2
Minimum Cisco
IOS Release
12.2(18)SXE
12.2(18)SXE
12.2(18)SXF
12.2(18)SXE2
2-1

Advertisement

loading

Related Manuals for Cisco 7600

Summary of Contents for Cisco 7600

  • Page 1: Table Of Contents

    • Cisco 7600 SSC-400 Overview, page 2-12 SIP Summary Summary descriptions of the SIPs that are supported on the Cisco 7600 series routers are shown in Table 2-1. The Description column indicates the aggregate bandwidth supported by the SIP across all subslots—not Note per SPA subslot.

  • Page 2: Checking Hardware And Software Compatibility

    Identifying Slots and Subslots for SIPs and SPAs This section describes how to specify the physical locations of a SIP and SPA on the Cisco 7600 series routers within the command-line interface (CLI) to configure or monitor those devices.
  • Page 3 POWE R SUPP LY 1 POWE R SUPP LY 2 INPUT OUTPUT FAIL INPUT OUTPUT FAIL SIP and SPA Installed in a Catalyst 6509 Switch Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide Identifying Slots and Subslots for SIPs and SPAs...
  • Page 4 SIP in the router chassis slot, as shown in the “SIP, SSC, and SPA Product Overview” chapter of the Cisco 7600 Series Router SIP, SSC, and SPA Software Configuration Guide. Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide...

  • Page 5: Cisco 7600 Sip-200 Overview

    Cisco 7600 SIP-200 installed with a vertical orientation on a Cisco 7609 router. The Cisco 7600 SIP-200 supports four subslots for the installation of SPAs. In this example, the subslot locations are vertically oriented as follows: SIP subslot 0—Top–right subslot...
  • Page 6 The SIP is loading. The SIP is powered off. Cisco 7600 SIP-200 Physical Specifications Specifications The SIP occupies one module slot and can be operated in Cisco 7600 series routers. 8 lb (3.64 kg) 32 to 104°F (0 to 40°C) 10 to 90 percent, noncondensing –4 to 149°F (–20 to 65°C)
  • Page 7 Cisco 7600 SIP-200 Memory Installation and Removal Figure 2-5 shows the location of the DIMMs on a Cisco 7600 SIP-200. Perform the following procedure to install and remove a DIMM: To install a DIMM, slide the DIMM into the slot. The retaining clips secure the DIMM in place.

  • Page 8: Cisco 7600 Sip-400 Overview

    SE RV IC ES CA RD 1 SW3 2 SW10 Cisco 7600 SIP-400 Overview The following sections describe the Cisco 7600 SIP-400 (Cisco part number 7600-SIP-400): • Cisco 7600 SIP-400 Processor, page 2-9 • Cisco 7600 SIP-400 LEDs, page 2-9 •...
  • Page 9 The SIP is loading. The SIP is powered off. Cisco 7600 SIP-400 Physical Specifications Specifications The SIP occupies one module slot and can be operated in Cisco 7600 series routers. 8 lb (3.64 kg) 32 to 104°F (0 to 40°C) 10 to 90 percent, noncondensing –4 to 149°F (–20 to 65°C)

  • Page 10: Cisco 7600 Sip-600 Overview

    Cisco 7600 SIP-600 Overview Cisco 7600 SIP-600 Overview The following sections describe the Cisco 7600 SIP-600 (Cisco part number 7600-SIP-600): Cisco 7600 SIP-600 Processor, page 2-10 • Cisco 7600 SIP-600 LEDs, page 2-10 • Cisco 7600 SIP-600 Physical Specifications, page 2-10 •...
  • Page 11 OL-5052-14 Cisco 7600 SIP-600 Physical Specifications Specifications The SIP occupies one module slot and can be operated in Cisco 7600 series routers. The Cisco 7600-SIP-600 supports installation of only a single SPA in the first subslot. 8 lb (3.64 kg) 32 to 104°F (0 to 40°C)

  • Page 12: Cisco 7600 Ssc-400 Overview

    Cisco 7600 SSC-400 Overview Cisco 7600 SSC-400 Overview The following sections describe the SPA services carrier (Cisco part number 7600-SSC-400): Cisco 7600 SSC-400 Processor, page 2-12 • Cisco 7600 SSC-400 LED, page 2-12 • Cisco 7600 SSC-400 Physical Specifications, page 2-13 •...
  • Page 13 Storage temperature OL-5052-14 Cisco 7600 SSC-400 Physical Specifications Specifications The Cisco 7600 SSC-400 occupies one module slot and can be operated in Cisco 7600 series routers. 8 lb (3.64 kg) 32 to 104°F (0 to 40°C) 10 to 90 percent, noncondensing –4 to 149°F (–20 to 65°C)
  • Page 14 Chapter 2 Overview: Cisco 7600 Series SIPs Cisco 7600 SSC-400 Overview Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 2-14 OL-5052-14...