hit counter script
Download
Share
Print this page
Sony SIR-3100T Instruction Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. DVR
  5. SIR-3100T
  6. Instruction manual

Sony SIR-3100T Instruction Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
Hi-speed AIT Data Recorder
SIR-3100T
Precision Analog Unit / Wide Band Analog Unit
SIR-3032i / SIR-3032W
Read all the instructions in the manual carefully before use and strictly follow them.
Keep the manual for future references.
A d v a n c e d
I n t e l l i g e n t
T a p e
Instruction Manual

Advertisement

loading

Related Manuals for Sony SIR-3100T

Summary of Contents for Sony SIR-3100T

  • Page 1 Hi-speed AIT Data Recorder SIR-3100T Precision Analog Unit / Wide Band Analog Unit SIR-3032i / SIR-3032W Read all the instructions in the manual carefully before use and strictly follow them. Keep the manual for future references. A d v a n c e d...
  • Page 2 10 m. For AC power-driven products to meet EN 61000-6-2/2001, the following operational conditions must be satisfied. 1. Input and output signal cable length : 30 m or less SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 3 Durch Ihren Beitrag zum korrekten Entsorgen dieses Produkts schützen Sie die Umwelt und die Gesundheit Ihrer Mitmenschen. Umwelt und Gesundheit werden durch falsches Entsorgen gefährdet. Materialrecycling hilft, den Verbrauch von Rohstoffen zu verringern. Weitere Informationen über das Recycling dieses Produkts erhalten Sie auf der Webseite von Sony Manufacturing Systems Europe: http://www.sonymanufacturing.com/environment...
  • Page 4 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 5 Safety Precautions Sony Manufacturing Systems Corporation products are designed in full consideration of safety. However, improper handling during operation or installation is dangerous and may lead to fire, electric shock or other accidents resulting in serious injury or death. In addition, these actions may also worsen machine performance.
  • Page 6 . Be sure to input to the unit only the specified signal voltage. . Replace only with specified type and rated fuse. CAUTION . Disconnect the power cord from the unit if it is not in use. . Disconnect the power cord before replaceing fuse. SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 7 FWD key with REC key pressed down. Power Switch When turning off the unit completely, first confirm that the ACCESS lamp is out and then turn off the POWER switch on the rear of unit. SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 8 * IEPE input format: The input format for using a sensor with built-in the pre-amplifier (IEPE type). In this unit, either TEDS mode, which acquires the TEDS data, or IEPE mode, which doesn’t acquire TEDS data, can be selected. SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 9 Overwriting Data ..................2-2 2-6. ID Block ....................... 2-3 3. Names and Functions of Parts ........3-1 3-1. SIR-3100T (Recording unit) ................ 3-1 3-1-1. Front Panel .................. 3-1 3-1-2. Rear Panel ................. 3-11 3-1-3. Side Panels ................3-15 3-2. SIR-3032i/W (Measuring Unit) ..............3-16 3-2-1.
  • Page 10 12-6. Setting the Input DC Offset ................ 12-5 12-6-1. Setting Input DC Offset Manually ..........12-5 12-6-2. Setting Input DC Offset Automatically ........12-6 12-7. Setting the Input Format ................12-7 12-8. Setting the Transmission Format ..............12-8 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 11 15-6-2. Trigger Recording ..............15-12 15-6-3. Playback of the Pre-trigger Data ..........15-12 16. Search ................16-1 16-1. ID/INDEX Number Search ................ 16-2 16-1-1. Searching with the SEARCH key ..........16-2 16-1-2. Searching with the TOC Viewer ..........16-2 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 12 21. Attaching the Rack Mount Adaptor ......21-1 21-1. Before Use ....................21-1 21-2. Attachment Procedure for Rack Mount Adaptor ........21-1 22. Specifications ............... 22-1 22-1. Specifications (SIR-3100T) ................ 22-1 22-1-1. AIT Cartridges ................22-1 22-1-2. Voice Annotation Channel ............22-1 22-1-3. Monitor Out ................22-1 22-1-4.
  • Page 13 By combining with a measuring unit, the SIR-3000 series can be used to build the optimum system for measurement subjects. Support for 32 ch x 20 kHz is provided by combining the minimum configuration of the SIR-3100T and SIR-3032i/W. Connection of 4 SIR-3032i/W to the recording unit enables recording and playback at 128 ch x 5 kHz.
  • Page 14 AIT-2 Turbo tape recorded by the SIR-3000 series can be read out directly using an external AIT tape drive (made by Sony). Therefore, even if the recording unit is not available, data can be directly analyzed. External AIT tape drive (made by Sony) AITE200T-UL High-speed Data Transfer Interface By employing the high-speed data transfer interface (option), digital data can be transferred to a computer in real-time during recording or playing back.
  • Page 15 10 kg for the recording unit and 7.5 kg for the measuring unit give the SIR-3000 a design with superior compactness and portability. Playback compatibility with the SIR-1000 series Tapes recorded by the SIR-1000 series can be played back by the SIR-3100T. Number of SIR-3100T playback speed...
  • Page 16 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 17 2. Data Format and Basic Operations 2-1. Data Format Tapes recorded by the SIR-3100T are compliant with the AIT standard physical and logical formats (ECMA 246, 291, 292), but at the application level, the data is in the SIR dedicated format. This is outlined below.
  • Page 18 ID or index number. 2-3. Initialization of Recording Media (Formatting) When a different format or unformatted AIT cartridge is loaded in the SIR-3100T, the LCD screen automatically changes to the Utility screen and “Format” is selected. To format this AIT cartridge, press the F1 key, and then press the FWD key while holding down the REC key.
  • Page 19 Each ID block consists of segments of approximately 550 kbytes referred to Records. Therefore, the shortest ID block length is one Record. This is approximately 170 ms at 1x speed (normal speed) and 2.7 seconds at 1/16x speed. Thus, recording at 1/16x speed cannot be stopped within 2.7 seconds. SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 20 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 21 These slits are used to take in air to cool the inside of the recording unit. The filter prevents dust from entering inside the recorder. For details on filter replacement, see “4-4. Filter Replacement”. To prevent the inside of the recording unit from overheating, do not cover the ventilation slits. SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 22 REC key Press this key alone to select the E-E mode. Press this key together with the FWD key to record data. qs PAUSE key Used when performing a recording pause or playback pause. SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 23 When the playback signal source of the speakers or earphones are set to voice annotation When the playback signal source of the speakers or earphones are set to analog data signals SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 24 REMAIN : Displays the amount of recording media remaining in hour and minute according to the speed. S-TIME : Displays the current time in recording unit in year/month/day and in hour/minute/second. R-TIME : Displays the time recorded on the recording media in year/month/day and in hour/minute/ second. SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 25 This area displays the recording media capacity that is being used. wg Function key command display area This area displays the function key commands during setting. (The function key commands vary depending on the setting option.) SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 26 The descriptions in this section use the expressions below to indicate how the key was pressed. When the key is pressed by itself : No additional comment When the setting key is pressed after the SHIFT key : in SHIFT mode SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 27 / G key : Every channel el F1 to F4 keys The functions displayed on the current LCD screen are assigned to F1 to F4 keys. The assigned functions vary depending on the setting item. SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 28 MIC jack Insert the supplied microphone plug here. The lamp at the bottom right lights according to the sound input. rd MONITOR The channel of the measuring unit displayed on the LCD screen is output. SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 29 It is time to replace the cartridge. * This occurs when errors due to the tape exceed a certain level. . If the rk, rl, and t; indicators are all blinking at the same time, a hardware-related problem has occurred. SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 30 Recording media error lamps (red) Lit when an error occurs in the AIT-2 Turbo Drive. Lamp status Main error cause Error recovery method An error occurred during tape access. . Tape initialization . Tape replacement 3-10 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 31 . To prevent the inside of the recording unit from overheating, do not block the air outlet. . Leave a space of at least 100 mm between the rear side of the recording unit and any other object. 3-11 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 32 Rated current 10 A Rated voltage 250 V Size 5 ø20L Be sure to disconnect the DC power cord before replacing the fuse. 7 Ground terminal This is a ground terminal for the frame ground. 3-12 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 33 TO SYNC connector Used to synchronously operate multiple recording units. qd TO HOST connector Used to control the recording unit from a host computer. qf TO EXPMAIN1/TO EXPMAIN2 connector Used to connect the measuring units. 3-13 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 34 3. Names and Functions of Parts Option Slots qg Option slot Insert optional boards here. 3-14 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 35 3. Names and Functions of Parts 3-1-3. Side Panels Right side panel Left side panel 1 Measuring unit connection holes Used to connect the measuring units. Used to secure the shock mount adaptor. 3-15 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 36 Operating mode 2 Ventilation slits These slits are used to take in air to cool the inside of the measuring unit. To prevent the measuring unit from overheating, do not block the ventilation slits. 3-16 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 37 TEDS mode, which acquires the TEDS data, or IEPE mode, which doesn’t acquire TEDS data, can be selected. 5 S/D selector switch Sets the transmission format in the analog input block. S : Single-ended D : Differential 3-17 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 38 If the setting button is not pressed within three seconds after the EXP No. display is displayed, it changes back to the monitor channel display. qa Monitor output Outputs the channel number displayed on the indicator from the analog channel output in the measuring unit. 3-18 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 39 When there are multiple measuring units, the channels are put in order starting from the smallest EXP <Example> Channel assignments for two 32-channel measuring units EXP No. 1 : Channels 1 to 32 EXP No. 2 : Channels 33 to 64 3-19 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 40 Rated current 10 A Rated voltage 250 V Size 5 ø20L Be sure to disconnect the DC power cord before replacing the fuse. 9 Ground terminal This is a ground terminal for the frame ground. 3-20 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 41 . Do not place hot objects on the right and left side of the measuring unit. . Leave a space of at least 50 mm between the right and left sides of the measuring unit and any other object. 3-21 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 42 3-22 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 43 . Make sure that spike noise is not included when taking AC power from an inverter, etc. . The internal backup battery is charged whenever the POWER switch is set to ON regardless of whether the unit is in standby mode. SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 44 Connect the AC power cord (supplied) to the AC IN connector. Supply the power. When set to 100/120 V : 90 to 132 V AC When set to 220/240 V : 198 to 250 V AC SIR-3100T SIR-3032i/W SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 45 Connect the 12 V DC power supply (allowable 11 to 30 V) SIR-3100T SIR-3032i/W The polarities of the DC power cord are red: positive and black: negative. The connector pin assignment is Pin 1: positive, Pin 2: negative and Pin3: frame GND. SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 46 . 24 V power is supplied to BNC cable when the recorder is set in E-E, REC-PAUSE or REC mode during IEPE input (IEPE or TEDS). Be sure to check the input format when connect a signal source to the INPUT connector. SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 47 Confirm that the lamp at the left side of standby key on the front panel lights. When the right and left lock knobs on the front panel are set to RELEASE, the front panel can be opened. Open the dust cover. Dust cover SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 48 Set the right and left lock knobs on the front panel to RELEASE, and then open the front panel. Press the eject key. The AIT cartridge is unloaded. During unloading, the access lamp blinks, and it turns off when unloading is complete. The AIT cartridge is ejected after rewinding to the BOD. SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 49 Recording allowed ... 4-3-5. Cleaning Tape If x (recording/playback error) is displayed frequently, use the supplied cleaning cartridge to clean the head. After loading the cleaning tape, it is automatically ejected after head cleaning is complete. SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 50 Dust tends to adhere to the filter, and so it should be cleaned or replaced at regular intervals. Be sure to always reattach it after cleaning. New filters can be ordered by requesting “SIR-3100T dust filters” from the Service section. Filter replacement interval (guideline): 1 month Replacement procedure Open the front panel.
  • Page 51 IEPE input (IEPE or TEDS). Be sure to check the input format when connect a signal source to the INPUT connector. In order to stabilize the DC bias of the IEPE sensor, make a recording after warming up the unit sufficiently with E-E mode. SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 52 DC offset value, and output level value). In the record mode, press the F3 key to sequentially change the contents displayed as follows. Address Amount of recording Record time Record time (± h/m/s) media remaining (y/m/d) (h/m/s) (h/m) 4-10 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 53 Address search This searches designated addresses (controlled by Telnet). Real-time clock This searches the specified real-time clock value written on the search recording media (controlled by Telnet). Manual search This performs 16x-speed fast-forwarding or fast-rewind. SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 54 The above mark “+” shows that press the one key while pressing the another key at the same time. (For example, REC FWD means that press FWD key while pressing REC key at the same time.) SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 55 STOP — — — PAUSE — ID search Manual search STOP — — — — — Manual search STOP — — — — — Manual search SEARCH STOP — — — — — — — SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 56 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 57 Changing the AC voltage 100/120 V or O (Rear) 13-5 200/240 V Save of setting values/ — For making batch settings with the default 14-1 Recall of setting values settings or with recording settings with a current address SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 58 Reference LCD screen Key Telnet Panel ± 1 Vpk Input range 12-5 Input DC offset 12-6 Input format Direct DC 12-7 ± 1 Vpk Output level 12-10 Measuring unit — O (Front) 17-2 Monitor channel SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 59 (Executing Diagnostics) (Section 14-6) TOC viewer (Checking the Recoding Media Contents) (Section 13-1) Time (Changing to the Address, Amount of Recording Media Remaining, or Time Display) (Section 13-2) PK-CLR (Clearing the Peak Indicator and Over Indicator) SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 60 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 61 On/Off 7-2-4. Auto Format * The screen of “Main” – “Function” – “Display” – “Network” – “Clock” can be switched with the F1/F2 keys. * Press the F4 key to return to the Measurement screen. SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 62 . When condensation is detected and the condensation dissipation operation is being performed, be sure to leave the power on and wait until the operation is completed. <When set to Off> No warnings are indicated even if condensation occurs. SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 63 * For the setting procedure, see “7-1. Setting Procedure (for Main Screen)”. <When set to On> When a format different from the SIR-3100T and SIR-1000 or unformatted AIT cartridge is loaded, the cartridge is automatically formatted. <When set to Off>...
  • Page 64 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 65 On/Off 8-2-5. IRIG-B Timecode * The screen of “Main” – “Function” – “Display” – “Network” – “Clock” can be switched with the F1/F2 keys. * Press the F4 key to return to the Measurement screen. SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 66 Single : During trigger recording, recording starts when the trigger input signal changes from High to Low, and recording continues until the STOP key is pressed. Multi : During trigger recording, recording starts when the trigger input signal changes to Low, and recording stops when it changes to High. SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 67 Set this switch to On to calibrate the internal clock by inputting the IRIG-B time code to the AUX analog channel. When set to Off, the internal clock is not calibrated with the IRIG-B time code. Factory setting: On * For the setting procedure, see “8-1. Setting Procedure (for Function Screen)”. SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 68 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 69 The bar meter always displays the current value. <When set to Hold> The peak indicator is held at the maximum level until PK-CLR (F4) is pressed or until entering the E-E, REC-PAUSE, or REC-FWD mode from STOP mode. SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 70 The LCD contrast can be adjusted in one of eleven levels. 9-2-4. Adjusting LCD Brightness (LCD Brightness) Factory setting: 5 * For the setting procedure, see “9-1. Setting Procedure (for Display Screen)”. The LCD brightness can be adjusted in one of eleven levels. SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 71 * By pressing F3 (Apply) key, the changed IP address and the changed subnet mask are set. When escaped from the Global Setup Menu without setting, the changed value is not set. * Press the F4 key to return to the Measurement screen. 10-1 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 72 10-2 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 73 * By pressing the F3 (Apply) key, the changed time is set. When escaped from the “Global Setup Menu” without setting, the changed value is not set. * Press the F4 key to return to the Measurement screen. 11-1 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 74 11-2 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 75 1/4 x x x x x 1/8 x x x x x 1/16 Setting value Speed 1/2x 1/4x 1/8x 1/16 MByte/s 0.75 0.38 0.19 Press the SPD/BCM key. The recording/playback speed is set. 12-1 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 76 Use the f / F key to select the number of channels. Setting value: 32/64/128 No. of measuring units Max. no. of channels Press the SPD/BCM key. The number of recording channels is set. 12-2 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 77 When not in setting mode, the f, F, g, and G keys can be used to change the monitor channel. f / F key : Every 16 channels g / G key : Every channel 12-3 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 78 (See [12-7. Setting the Input Format]): When the unnecessary DC components are contained in the input signal, it is recommended to set the input range after canceling the DC components with the input DC offset. 12-4 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 79 When not in setting mode, the f, F, g, and G keys can be used to change the monitor channel. f / F key : Every 16 channels g / G key : Every channel 12-5 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 80 DC component is calculated. Until the OFFSET key is pressed again, the peak value detection is continued. After three or more seconds have elapsed, press the OFFSET key. The DC input offset value is set for all channels. 12-6 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 81 When not in setting mode, the f, F, g, and G keys can be used to change the monitor channel. f / F key : Every 16 channels g / G key : Every channel 12-7 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 82 Press the MEMO key. The lamp at the top left of the key turns on, and the Record Memo indicator appears in the setting value display area to indicate that the memo can be edited. 12-8 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 83 . Pressing the F2 key deletes the character at the cursor position. The characters after the cursor position move back to fill in the deleted space. . If the cursor is at the end of the text, the cursor position moves forward each time the F2 key is pressed. 12-9 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 84 When not in setting mode, the f, F, g, and G keys can be used to change the monitor channel. f / F key : Every 16 channels g / G key : Every channel 12-10 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 85 The Panel Lock state is set (key operation is disabled), and the PNL LOK lamp turns on. Canceling Panel Lock Hold down the SHIFT key for at least two seconds in the Panel Lock state. This cancels Panel Lock, and the PNL LOK lamp turns off. 12-11 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 86 12-12 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 87 The volume of warning buzzer accompanied by the warning message cannot be adjusted. Turn the VOL knob on the recording unit rear panel. Be careful that you do not listen to earphones (sold separately) at a high volume for extended periods of time. 13-1 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 88 Use the AC voltage selector switch on the rear panel of the respective unit to change the voltage. Move the switch to the selected voltage side. Left side : 100/120 V (allowable 90 to 132 V) Right side : 220/240 V (allowable 198 to 250 V) 13-2 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 89 (See section 6-1 for the factory settings.) Press the F1 key in the Measurement screen. The Utility screen is displayed. Use the f / F key to select “Save/Recall Setup”. Press the F1 key. The Save/Recall Setup screen is displayed. 14-1 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 90 * “from Previous Record” Perform playback once before recalling settings from the media. This sets all the input range and input DC offset for all channels during recording. (No output level settings are made.) 14-2 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 91 A dialog box is displayed for confirming the formatting operation. Press the FWD key while holding down the REC key. Formatting is performed. <To not execute> Press the F4 key (cancel). Once formatting is started, it cannot be cancelled. 14-3 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 92 <To stop calibration> Press the F4 key. Calibration is stopped at the point where the frequency band changes. If calibration is stopped before completion, turn the power off and then on again before using. 14-4 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 93 Use the f / F keys to select “Barmeter Auto Adjustment”. Press the F1 key. A dialog box is displayed for confirming execution. Press the FWD key while holding down the REC key. This executes bar meter auto adjustment. 14-5 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 94 Use the F key to select “Diagnostics”. Press the F1 key. The diagnostics are performed. This takes about one minute. <To stop diagnostics> Press the F4 key. If an error occurs, an error code will be displayed (see section 18-2). 14-6 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 95 Use the f / F key to select ID. Press the G key. The INDEX for selected ID are deployed and displays on the screen. To close the detailed list, press the g key. 14-7 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 96 This is the ID recording conditions (Number of channels: Analog input A, Digital input D). 5 Speed This is the recording speed. 6 Length The address value at recording is displayed. 7 Date This is the recording start date and time. 14-8 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 97 In addition, a start ID is also attached each time recording starts to allow start ID search. The INDEX number increments each time the INDEX/ID key is pressed during recording. The INDEX numbers can be used to find specific locations. 15-1 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 98 15. Data Recording/Playback Stopping Recording Press the STOP key. This stops recording, writes a TOC (and EOD) to that position, and then the EOD lights. Earphone Microphone LOAD ACC Oscilloscope, etc. Signal source MONITOR 15-2 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 99 . Noise may be generated if data between recording blocks is played back. . It takes max. 2 seconds from the start of playback when to set input setting the same as the settings recorded on the recording media. 15-3 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 100 15-3-1. Connecting the Microphone and Earphone Connect the microphone (supplied) to the MIC jack on the front panel. Connect the earphone (sold separately) to the PHONE jack on the front panel. LOAD ACC Microphone MONITOR Earphone 15-4 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 101 . When the speed during recording and playback differ, the pitch (signal frequency) of voice annotations differs from the pitch at recording. . The existence of voice annotations can be checked by the light of MIC lamp while the VOL knob is in the minimum position. 15-5 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 102 Use at an input frequency range where this effect can be ignored. Input Int Clock Output : Input waveform : Sampling waveform (Internal clock) : Output waveform d1 to d4 : Phase-shift (jitter) Example of phase shift caused by sampling 15-6 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 103 AUX-1 (DIGITAL) OUT connector on the rear panel. Also, when a playback signal is detected, existence of the input signal during recording is displayed in the status display area of the LCD screen. 15-7 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 104 If necessary, use a BNC cable (sold separately) to connect the AUX-2 (IRIG-B) OUT connector on the rear panel and IRIG time code reader. When the IRIG timecode is set to Off, it is not handled as an IRIG-B timecode signal. 15-8 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 105 For the R-TIME information in the recording media position display area during playback, the recording unit's real-time clock value (xxYxxMxxD/xxHxxMxxS) recorded on the recording media is displayed. This value corresponds to the IRIG time recorded on the recording media. 15-9 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 106 Playing Back AUX Analog Data Signal When a recording media recorded with an AUX analog data signal is played back, the AUX analog data signal is output from the AUX-2 (IRIG-B) OUT connector on the rear panel. 15-10 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 107 Use a BNC cable (sold separately) to connect the TRIG REC IN connector on the rear panel and the trigger signal. Signal source . It the ADDRESS duration is less than 2 seconds, the next signal may not start up. . The input voltage level should be TTL level. 15-11 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 108 <When pre-trigger recording is set to Off> Data is recorded immediately after being triggered. * See section 8 for pre-trigger recording. 15-6-3. Playback of the Pre-trigger Data The pre-trigger data is played back with the ADDRESS “-000H00M00S”. 15-12 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 109 The lamp display during ID/INDEX number search and Mark search modes are shown below. Search operation Lamp SEARCH INDEX/ID Mark1, Mark2 SEARCH key pressed Blinking Blinking Searching Blinking Lamp of selected mode lit FOUND (ends normally) NOT FOUND (target not found) 16-1 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 110 16-2-1. Searching at the Next Recording Start Position Press the SEARCH key in STOP mode, and then press the FF key. This skips to and stops at the start point of the next recording from the current position. 16-2 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 111 . When searches are made at a slow speed (1/4, 1/8, 1/16), the marked points and target may be displaced by up to three seconds from the real-time clock value. MRK1 key MRK2 key 16-3 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 112 Reverse search While pressing the FWD key, press the REW key. The contents rewind while the keys are held down (16x-speed rewind). * When the REW key is released, the mode changes to FWD. 16-4 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 113 TCP/IP (Telnet) connection HOST IP address : 192.168.1.100 (default setting) Port no. : 23 Login : xxxx Password : sms After entering this information, the commands can be executed. Type “quit” to disconnect from Telnet. 17-1 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 114 Recording/playback speed setting SYN : Selecting synchronous playback TIM : Real-time clock setting TRG : Trigger setting TRM : Terminator selection TSG : Test signal selection UTL : Utility mode setting Only during stop 17-2 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 115 Synchronous playback status TIM? Real-time clock readout TOC? TOC data readout TRG? Trigger setting status TRM? Terminator selection status (returned strings) TSG? Test signal selection status UTL? Utility mode setting readout VOL? Recording media volume readout 17-3 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 116 <2><3><4> : ID number at formatting (001) This command logically erases all pre-recorded data. Related command : FMT? FTP : Frequency type setting Command format FTP : <1> <1> : 0=48 k sampling, 1=65.536 k sampling 17-4 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 117 97 to 112 CH 6=CH 7 7=Measuring unit 4 113 to 128 CH 7=CH 8 8=CH 9 9=CH 10 A=CH 11 B=CH 12 C=CH 13 D=CH 14 E=CH 15 F=CH 16 Related command : MON? 17-5 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 118 <3> : CH 2 input range code <17> : CH 16 input range code Input range code 0=RSV, 1=10 V, 2=5 V, 3=2 V, 4=1 V, 5=0.5 V, 6=0.2 V, 7=0.1 V Related command : RNG? 17-6 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 119 Terminator selection Command format TRM : <1> <1> : 0=CR + LF, 1=CR, 2=LF This sets the break code for replies from the recording unit. The default is (CR + LF). Related command : TRM? 17-7 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 120 In case of <1> and <3>, when one is set to “1”, be sue to set the other to “0”. Ex.) OK <1> : 1, <3> : 0 NG <1> : 1, <3> : 1 Related command : UTL? When not selecting the mode, it all sets to ZERO. 17-8 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 121 1=The calibration of the measuring unit is inhibited. CAL? Calibration status Command format CAL?/[ ] Returned format CAL : <1> <1> : 0=Calibration finished normally 1=Calibration finished abnormally 2 to 7=Value other than 01 Related command : CAL 17-9 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 122 F=RSV Related command : CHA CFG? Unit configuration Command format CFG?/[ ] Returned format CFG : <1><2>...<7> <1> : 0=SIR-1000, 1=SIR-1000W, 2=SIR-1000i, 3=SIR-3400H, 4=SIR-3100T <2> : Option slot 1 type 0=None 1=RSV 2=RSV 3=RSV 4=RSV 5=RSV <3> : Option slot 2 type...
  • Page 123 7=Measuring unit 4 113 to 128 CH <3> : Input format for CH1 0=DIRECT-DC coupling 1=DIRECT-AC coupling 2=IEPE 3=TEDS <4> : Input format for CH2 <18> : Input format for CH16 Related command : INP 17-11 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 124 MOD : <1><2> <1> : 0=STOP, 1=FWD, 2=E-E, 3=REC, 4=FWD-PAUSE, 5=REC-PAUSE, 6=FF, 7=RSV, 8=REW, 9=RSV, A=EJECT <2> : S=During STOP transition P=During PAUSE transition 0=The end of transition F=During FWD Transition Related command : MOD 17-12 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 125 0=RSV, 1=RSV, 2=5 V, 3=2 V, 4=1 V, 5=RSV, 6=RSV, 7=RSV, 8=RSV, 9=RSV, A=Manual Related command : OPL PNL? Panel lock status readout Command format PNL?/[ ] Returned format PNL : <1> <1> : 0=Panel lock canceled, 1=Panel lock set Related command : PNL 17-13 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 126 SPD? <1>/[ ] <1> : 0=Recording unit setting value, 1=Recording media data Returned format SPD : <1> <1> : 0=1 x, 1=1/2 x, 2=1/4 x, 3=1/8 x, 4=1/16 x, A=x2, B=x4, F=EXT Related command : SPD 17-14 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 127 <1> : 0=Recording unit setting value, 1=Recording media data Returned format TIM : <1><2>...<12> <1><2> : Year (last 2 digits) <3><4><5><6> : Month and date <7><8><9><10><11><12> : Hours, minutes and seconds Related command : TIM 17-15 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 128 Test signal selection status Command format TSG? /[ ] Returned format TSG : <1> <1> : Test signal selection Analog channel 0= OFF 1=AC 2= +DC 3= _DC 4= GND Related command : TSG 17-16 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 129 <15><16><17><18><19><20> : Last recorded SIR serial number <21><22> : Last recorded year (last 2 digits) <23><24><25><26> : Last recorded month and date <27><28><29><30><31><32> : Last recorded hours, minutes and seconds Related command : TOC? 17-17 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 130 17-18 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 131 FIFO memory is output until the correct data is read. If the correct data is read before the FIFO memory is emptied, playback continues normally and the mark is not displayed. 18-1 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 132 The condensation data is not set -System Caution- No available space in tape ERA OFF Unable to overwrite PNL OPN The front panel is open OVR FLOW Data overflowed during recording UDR FLOW Data was dropped during playback 18-2 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 133 2. Wait at least 15 seconds, and then set the POWER switch to ON. 3. Hold down the standby switch for two seconds again. If operation is still not restored, set the POWER switch to OFF, unplug the power cable, and then contact service engineer. 18-3 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 134 18-4 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 135 Spring washers (ø4) Hexagonal socket head bolts (M4: black) 16 L wrench (for M4) Remove the four bottom feet from the bottom of the recording unit. Leave the bottom feet on the measuring unit. 19-1 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 136 Use the 4 fixtures supplied with the measuring unit (black), 16 washers (ø4), 16 spring washers (ø4: black), 16 hexagonal socket head bolts (M4: black), and L wrench (for M4) to attach the measuring unit and recording unit. 19-2 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 137 Computer Ether Net Ground connection SIR-3100T SIR-3032i/W Ground connection SIR-3032i/W Ground connection Extension cable (supplied) 128 Channel Configuration Computer Ether Net Ground connection SIR-3100T SIR-3032i/W SIF-3004 (sold separately) SIR-3032i/W SIR-3032i/W SIR-3032i/W Extension cable (supplied) 19-3 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 138 19-4 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 139 Shock mount adaptor packing contents Name Quantity Shock mount adaptor L wrench (for M4) L wrench (for M8) Hexagonal socket head bolts (M4) Spring washers (ø4) Bolts with hexagonal holes (M8) Spring washers (ø8) Instruction manual 20-1 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 140 Reference: Installation hole dimensions and pitch 493.6 mm Shock mount adaptor ø9 hole Remove the legs from the bottom of unit. Recording unit * In case of the measuring unit, the removal procedure is the same. 20-2 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 141 Use the supplied hexagonal socket head bolts (M4), spring washers (ø4), and L wrench (for M4) to secure the unit to the shock mount adaptor. For use of a single recording unit alone Recording unit Recording unit Measuring unit Shock mount adaptor 20-3 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 142 20-4 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 143 The cover of the unit is removed before securing the rack mount adaptor, and so there is a danger of electrical shock or other accident. Attachment should not be performed by the customer. If attachment is required, please contact Sony Manufacturing Systems Corporation. Rack mount adaptor packing contents...
  • Page 144 (black) from each side cover (right and left), and then take off the right and left side covers. Left side cover Right side cover Lift up one side of the top cover and one side of the bottom cover. Top cover Bottom cover 21-2 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 145 Remove the eight M4 x 10 (silver) screws from the unit, and then take off the corner handle. Corner handle Corner handle Use the eight M4 x 10 (silver) screws removed in step 4 to attach the two rack mount adapters and two corner blocks. Rack mount adaptor Rack mount adaptor 21-3 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 146 21. Attaching the Rack Mount Adaptor Attach the top cover and side cover removed in steps 1 to 3 by performing steps 1 to 3 in reverse order. 21-4 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 147 : 1x BNC (Single-ended) Level : TTL Impedance : 10 kZ : ± 10 Vpk Withstand voltage Output Connectors : 1x BNC (Single-ended) Level : TTL Impedance : 50 Z Applicable load : 1 kZ or more 22-1 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 148 Nickel-metal- hydride battery: 24 V 1.1 Ah Power supply priority : AC > DC > internal backup battery 22-1-7. External Dimensions/Mass Dimensions : 449 (W) x 88 (H) x 305 (D) mm (Excluding projections) Mass : Approx. 10 kg 22-2 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 149 : x1 Cleaning cartridge : x1 Instruction manual : x1 Inspection sheet When using a plug adaptor (3-pin to 2-pin) for the AC power cord, be sure to connect the green wire to earth. 22-3 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 150 * The 1.25 to 20 k bandwidth is identical to SIR-3032i. ± 0.1 % or less DC characteristics Linearity REC : ±0.1 % or less /2 h Drift : ±0.1 % or less /2 h (30 minutes after power is turned on) 22-4 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 151 : Simultaneous indication for 1 to 32 channels, unidirectional indicator Power source : POWER Monitor : MONITOR CH is displayed : LED on Unit ID is displayed : LED off INPUT : IEPE input 22-5 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 152 : Horizontal (front panel facing forwards) : MIL-STD-810C, ± 14.7 m/s Vibration resistance (horizontal position) Shock resistance : 392 m/s , 11 ms (while stored) Polution degree : II Over voltage categoly : II 22-6 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 153 Bolts with hexagonal holes (M4: black) : x1 L wrench (for M4) : x1 Extension cable When using a plug adaptor (3-pin to 2-pin) for the AC power cord, be sure to connect the green wire to earth. 22-7 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 154 22-8 SIR-3100T / SIR-3032i / SIR-3032W...
  • Page 155 したがって、当社の許可なしに無断で複写したり、説明内 容（操作、保守など）と異なる目的で本マニュアルを使用 することを禁止します。 The material contained in this manual consists of information that is the property of Sony Manufacturing Systems Corporation and is intended solely for use by the purchasers of the equipment described in this manual. Sony Manufacturing Systems Corporation expressly...
  • Page 156 Sony Manufacturing Systems Corporation 1-10 Kiyoku-cho, Kuki-shi, Saitama 346-0035 Japan http://www.sonysms.co.jp/ SIR-3100T / SIR-3032i / SIR-3032W 2006.9 2-891-195-11 Printed in Japan ©2006 Sony Manufacturing Systems Corporation...

This manual is also suitable for:

Sir-3032iSir-3032w