Cisco Catalyst 3560-E Getting Started Manual page 6

Cisco systems switch getting started guide

Hide thumbs Also See for Catalyst 3560-E:

Table of Contents

The Express Setup Basic Settings page appears. If it does not appear, see the "In Case of

Step 12

Difficulty" section on page 20.

Enter this information in the Network Settings fields:

Step 13

• In the Management Interface (VLAN ID) field, the default is 1. Enter a new VLAN ID

only if you want to change the management interface through which you manage the

switch. The VLAN ID range is 1 to 4094.

• In the IP Address field, enter the IP address of the switch. In the Subnet Mask field, click

the drop-down arrow, and select a Subnet Mask.

• In the Default Gateway field, enter the IP address for the default gateway (router).

• Enter your password in the Switch Password field. The password can be from 1 to 25

alphanumeric characters, can start with a number, is case sensitive, allows embedded

spaces, but does not allow spaces at the beginning or end. In the Confirm Switch

Password field, enter your password again.

Note

You must change the password from the default password,

(Optional) Enter this information in the Ethernet Management Port Settings fields:

Step 14

In the IP Address field, enter the IP address of the Ethernet management port. In the Subnet

Mask field, click the drop-down arrow, and select a Subnet Mask.

cisco .

Table of Contents

Show Quick Links

Table of Contents