Table of Contents
Advertisement
Operation Manual / A130-M.. - A145-M..
7 Periodic maintenance work / 7.1 Foreword to maintenance
7
Periodic maintenance work
7.1
Foreword to maintenance
Maintenance work includes regular visual controls and cleaning operations which are inten-
ded to ensure the trouble-free functioning of the turbocharger.
To allow you to observe the standard service intervals and to maintain a high turbocharger
efficiency, ABB Turbocharging recommends that the cleaning procedure be carried out dur-
ing operation. This allows the thermal load of the engine to be kept low while ensuring max-
imum fuel efficiency.
Maintenance inter-
val
1)
24 ... 72 h
1)
50 ... 200 h
According to rating
2)
plate
Table 13: Maintenance table
[h] = Hours of operation
1)
If the maintenance intervals are incompatible with operation of the engine, contact ABB
Turbocharging.
2)
ABB Turbocharging recommends having mechanical cleaning carried out by an ABB Tur-
bocharging Service Station during the service work (see also chapter
to data on the rating plate
during operation is not sufficient to achieve the thermal load and the rating of the engine.
© Copyright 2021 ABB. All rights reserved.
Maintenance work
Cleaning the compressor during operation
→65
Cleaning the turbine during operation →68
Cleaning components mechanically →72
→58). Otherwise, only carry out mechanical cleaning if cleaning
HZTL4031_EN
Operating status
Engine load 50 ... 85 %
Engine load 20 ... 40%
(guideline value)
Engine stopped
Service work according
Rev.N
March 2021
Advertisement
Chapters
Table of Contents
