Page 1
To switch the FM/AM tuning step, see page 7. For the connection/installation, see page 33. Para cancelar la pantalla de demostración (DEMO), consulte la página 20. Para cambiar el paso de sintonización de FM/AM, consulte la página 7. Para la conexión/instalación, consulte la página 35. MEX-N5300BT/MEX-N4300BT/MXS-N4316BT...
Page 2
The validity of the CE marking is restricted to changed, suspended, or terminated without only those countries where it is legally prior notice. Sony does not bear any enforced, mainly in the countries EEA responsibility in these sorts of situations.
Page 3
Microwaves emitting from a BLUETOOTH device may affect the operation of Caution electronic medical devices. Turn off this IN NO EVENT SHALL SONY BE LIABLE FOR unit and other BLUETOOTH devices in the ANY INCIDENTAL, INDIRECT OR following locations, as it may cause an CONSEQUENTIAL DAMAGES OR OTHER accident.
(Android smartphone only), or the Siri Enter the browse mode during playback. function (iPhone only). (Not available when a USB device in N-Mark (MEX-N5300BT only) Android mode or iPod is connected.) Touch the control dial with Android Front panel release button smartphone to make BLUETOOTH ...
Page 6
/// Select a setup item, etc. ENTER Enter the selected item. Press and hold for more than 2 seconds to establish or terminate the “Sony | Music Center” function. / (prev/next) +/– (album +/–) VOL (volume) +/– Remove the insulation film before use.
The alarm will only sound if the displayed. built-in amplifier is used. This setting can be configured in the general Serial numbers (MEX-N5300BT only) setup menu (page 19). Make sure the serial numbers on the bottom of the unit and the back of the front panel are matched correctly.
The setup is complete and the clock starts. using One-touch connection (NFC) To display the clock (MEX-N5300BT only) Press DSPL. By touching the control dial on the unit with To set the clock automatically an NFC* compatible smartphone, the unit is Select [AUTO <RDS>] in step 3.
Page 9
Touch the N-Mark part of the unit Rotate the control dial to select [SET with the N-Mark part of the DEVICE 1]* or [SET DEVICE 2]*, then smartphone. press it. flashes while the unit is in pairing standby mode. * [SET DEVICE 1] or [SET DEVICE 2] will be changed to the paired device name after pairing is complete.
Page 10
To install the microphone Connecting with a paired For details, see “Installing the microphone BLUETOOTH device (MEX-N5300BT only)” (page 38). To use a paired device, connection with this Connecting with an iPhone/iPod unit is required. Some paired devices will (BLUETOOTH Auto Pairing) connect automatically.
Connecting a USB Device Listening to the Radio Turn down the volume on the unit. Connect the USB device to the unit. Listening to the Radio To connect an iPod/iPhone, use the USB Tuning step setting is required (except for connection cable for iPod (not supplied).
Using Radio Data System Playback (RDS) Playing a Disc Selecting program types (PTY) Insert the disc (label side up). Press PTY during FM reception. Rotate the control dial until the desired program type appears, then press it. The unit starts to search for a station broadcasting the selected program type.
• [BT AUDIO] does not appear in the display while Before making a connection, select the USB running the “Sony | Music Center” application via mode (Android mode or MSC/MTP mode) the BLUETOOTH function.
Rotate the control dial to select the desired search category, then press it to confirm. Handsfree Calling (via Repeat step 2 to search the desired BLUETOOTH only) track. Playback starts. To use a cellular phone, connect it with this To exit the “Quick-BrowZer” mode unit.
Rotate the control dial to select an By redial initial from the initial list, then press Press CALL. Rotate the control dial to select a When two cellular phones are connected name from the name list, then press to the unit, rotate the control dial to select either phone, then press it.
• What you can control with “Sony | Music Center” varies depending on the connected device. • To make use of “Sony | Music Center” features, see the details on your iPhone/Android smartphone. • For further details on “Sony | Music Center,” visit the following URL: http://www.sony.net/smcqa/...
This function requires you to reply icon. connect an iPhone to the unit via Activate the “Sony | Music Center” BLUETOOTH. Availability is limited to iPhone application, then touch the [Reply] (reply) 4s or later. Make sure that your iPhone is icon.
BLUETOOTH (SOUND), Display setup (DISPLAY), audio source even if you do not specify a track to BLUETOOTH setup (BLUETOOTH), “Sony | play. Music Center” setup (SONY APP) • When connecting the iPhone to the USB port, “Siri Eyes Free”...
EDIT CUSTOM (edit custom) General Setup (GENERAL) Registers the functions (SOURCE, ATT, VOL +/–, SEEK +/–, VOICE, ON HOOK, OFF HOOK) to the steering wheel remote LANGUAGE (language) (except for India control: models) Rotate the control dial to select the Changes the display language: [ENGLISH], function you want to assign to the [SPANISH].
FIRMWARE (firmware) S.WOOFER (subwoofer) (Available only while the source is off and SW LEVEL (subwoofer level) the clock is displayed.) Adjusts the subwoofer volume level: Checks/updates the firmware version. For [+6 dB] – [0 dB] – [-6 dB]. details, visit the support site on the back ([ATT] is displayed at the lowest setting.) cover.
AUTOPAIR (auto pairing) Starts BLUETOOTH pairing automatically DSPL-C (display color) (MEX-N5300BT only) when iOS device version 5.0 or later is Sets a preset color or customized color for connected via USB: [ON], [OFF].
• Do not splash liquid onto the unit. (SONY APP) Moisture condensation Do not splash liquid onto the discs. When Establish and terminate “Sony | Music moisture condensation occur inside the unit, Center” function (connection). remove the disc and wait for about an hour for it to dry out;...
Page 23
Please note that the use of this accessory with an Apple product may affect wireless performance. If you have any questions or problems concerning your unit that are not covered in this manual, consult your nearest Sony dealer.
Maintenance Specifications Replacing the lithium battery (CR2025) Tuner section of the remote commander When the battery becomes weak, the range Tuning range: of the remote commander becomes shorter. 87.5 MHz – 108.0 MHz (at 50 kHz step) CAUTION 87.5 MHz – 108.0 MHz (at 100 kHz step) Danger of explosion if battery is incorrectly 87.5 MHz –...
Page 25
Package contents: Sampling rate: 44.1 kHz, 48 kHz Main unit (1) Supported file system: FAT16, FAT32 Remote commander (1): RM-X231 Wireless Communication Microphone (1) (MEX-N5300BT only) Parts for installation and connections Communication System: (1 set) BLUETOOTH Standard version 3.0 Optional accessories/equipment:...
Page 26
MERCHANTABILITY AND FITNESS FOR A PARTICULAR trademarks owned by the Bluetooth SIG, Inc. and PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE any use of such marks by Sony Corporation is under FOUNDATION OR CONTRIBUTORS BE LIABLE FOR license. Other trademarks and trade names are ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, those of their respective owners.
The display disappears while the unit is Troubleshooting operating. [BLK OUT] (black out) is set to [B.OUT-ON] The following checklist will help you remedy (page 20). problems you may encounter with your unit. Before going through the checklist below, The display/illumination flashes.
Page 28
NFC function (MEX-N5300BT only) MP3/WMA/AAC files cannot be played. The disc is incompatible with the MP3/ One-touch connection (NFC) is not WMA/AAC format and version. For details possible. on playable discs and formats, visit the If the smartphone does not respond to the support site on the back cover.
Page 29
No ringtone. The volume of the connected audio device Adjust the volume by rotating the control is low (high). Volume level will differ depending on the dial while receiving a call. Depending on the connecting device, the audio device.
BLUETOOTH, the display CD NO MUSIC automatically switches to [BT AUDIO]. Insert a disc containing playable files The “Sony | Music Center” application or (page 24). BLUETOOTH function has failed. Run the application again. CD PUSH EJT: The disc could not be ejected properly.
Page 31
APP ––––––––: A connection with the (Android Open Accessory) 2.0 is application is not established. connected to the unit while [USB MODE] is Make the “Sony | Music Center” set to [ANDROID]. connection again (page 16). – Set [USB MODE] to [MSC/MTP] (page 19).
Page 32
OFF position, nor remove the USB device (page 23). If these solutions do not help improve the situation, consult your nearest Sony dealer. If you take the unit to be repaired because of device playback trouble, bring the device that was used at the time the problem began.
• Avoid installing the unit in areas subject to dust, dirt, excessive vibration, or high temperature, such as in direct sunlight or For MEX-N5300BT near heater ducts. • Use only the supplied mounting hardware for a safe and secure installation.
Connection (For MEX-N5300BT) Subwoofer* Power amplifier* White White/black striped Front speaker* Gray Gray/black striped Green Green/black striped Rear speaker* Purple Purple/black striped Black Yellow For details, see “Making connections” (page 36). Blue/white striped Orange/white striped from a wired remote control (not supplied)* ...
Connection (For MEX-N4300BT/MXS-N4316BT) Subwoofer* Power amplifier* White White/black striped Front speaker* Gray Gray/black striped Green Green/black striped Rear speaker* Purple Purple/black striped Black Yellow For details, see “Making connections” (page 36). Blue/white striped For Argentine models See “Power connection diagram (Argentine models only)”...
Page 36
Be sure to first connect the black ground *6 For details on installing the microphone, see (earth) lead to a common ground (earth) “Installing the microphone (MEX-N5300BT only)” point. (page 38). *7 Depending on the type of car, use an adaptor...
Page 37
To the car’s power connector Power connection diagram (Argentine models only) Check your car’s auxiliary power connector, and match the connections of cords correctly depending on the car. Auxiliary power connector continuous power Yellow supply power antenna (aerial) Blue/white /power amplifier striped control (REM OUT)
Page 38
Using the wired remote control Installing the microphone To enable the wired remote control, (MEX-N5300BT only) set [STR CONTROL] in [SET STEERING] to [PRESET] (page 19). To capture your voice during handsfree calling, you need to install the microphone .
Mounting the unit in the Installation dashboard • Before installing, make sure the catches on Removing the protection collar both sides of the bracket are bent and the bracket inwards 2 mm ( in). • For Japanese cars, see “Mounting the unit Before installing the unit, remove the in a Japanese car”...
Page 40
Detaching and attaching the front You may not be able to install this unit in panel some makes of Japanese cars. In such a case, consult your Sony dealer. For details, see “Detaching the Front Panel” (page 7). TOYOTA ...