Table of Contents
Advertisement
Operation Manual / 2 Safety / A100-M axial
1 Safety / 1.12 Hazards during operation and maintenance
1.12
Hazards during operation and maintenance
Noise hazards
The turbocharger's noise emission during operation is influenced by its installation and op-
erating conditions. A noise level exceeding 85 dB(A) is harmful.
WARNING
Danger due to noise
Exposure to noise can harm the hearing system, impair health and the psy-
chological state and may lead to lack of attention and irritation.
When the engine is running, always wear ear protection.
u
Always wear ear protection if the sound pressure level exceeds 85 dB(A).
u
Wear ear protection.
Hazards due to hot surfaces
Surfaces of the turbocharger, attached parts and operating fluids (lubricating oil) get hot
during operation. The surface temperature depends on the efficacy of the existing insula-
tion. The temperature may rise to a level that can cause burns.
WARNING
Danger of burns
Touching hot surfaces or contact with hot operating fluids can cause burns.
Do not touch hot surfaces. Observe the warning plate on the turbochar-
u
ger.
Wear heat-resistant safety gloves and protective clothing.
u
Wait for the turbocharger to cool down before carrying out any work.
u
Wear safety gloves to protect against thermal hazards.
© Copyright 2017 ABB. All rights reserved.
HZTL4023_EN
Revision D
June 2017
Advertisement
Chapters
Table of Contents
