Table of Contents
Advertisement
en
Cleaning and maintenance
:
Warning – Risk of burns!
The appliance will heat up during operation, especially
near the bulbs. Wait for the appliance to cool before
cleaning.
:
Warning – Risk of electric shock!
Penetrating moisture may result in an electric shock.
Clean the appliance using a damp cloth only. Before
cleaning, pull out the mains plug or switch off the circuit
breaker in the fuse box.
:
Warning – Risk of electric shock!
Penetrating moisture may cause electric shock. High-
pressure cleaners or steam cleaners must not be used.
:
Warning – Risk of injury!
Components inside the appliance may have sharp
edges. Wear protective gloves.
Cleaning agents
To ensure that the different surfaces are not damaged
by using the wrong cleaning agent, observe the
information in the table. Do not use any of the following:
Abrasive cleaning agents,
■
Cleaning agents with high alcohol content,
■
Hard scouring pads or cleaning sponges,
■
High-pressure cleaners or steam cleaners.
■
Wash new cloths thoroughly before use.
Follow all instructions and warnings in relation to
cleaning agents.
Area
Cleaning agents
Stainless steel
Hot soapy water:
Clean with a dish cloth and then dry with a
soft cloth.
Clean stainless steel surfaces in the direction
of the grain only.
Special stainless steel maintenance products
are available from customer service or from
authorised vendors. Apply a very thin layer of
the maintenance product with a soft cloth.
Painted surfaces
Hot soapy water:
Clean with a damp cloth and then dry with a
soft cloth.
Do not use any stainless steel cleaners.
Aluminium and plastic Glass cleaner:
Clean with a soft cloth.
8
Area
Cleaning agents
Glass
Glass cleaner:
Clean with a soft cloth. Do not use a glass
scraper.
Control elements
Hot soapy water:
Clean with a damp cloth and then dry with a
soft cloth.
Risk of electric shock caused by penetrating
moisture.
There is a risk of damage to the electronics
from penetrating moisture. Never clean con-
trol elementswith a wet cloth.
Do not use any stainless steel cleaners.
Cleaning the metal grease filters
This instruction manual applies to several appliance
variants. It is possible that some features are described
that do not apply to your appliance.
:
Warning – Risk of fire!
Fatty deposits in the grease filter may catch fire.
Clean the grease filter at least every 2 months.
Never operate the appliance without a grease filter.
Notes
Do not use any aggressive, acidic, or alkaline
■
cleaning agents.
When cleaning the metal grease filters, also clean
■
the holder for the metal grease filters inside the
appliance using a damp cloth.
The metal grease filters can be cleaned in the
■
dishwasher or by hand.
By hand:
You can use a special grease solvent for
Note:
stubborn dirt. You can get this from the online sales
centre.
Soak the metal grease filters in a hot soapy solution.
■
Clean the filters with a brush and then rinse them
■
thoroughly.
Leave the metal grease filters to drain.
■
In the dishwasher:
If the metal grease filters are cleaned in the
Note:
dishwasher, slight discoloration may occur. This has no
effect on the function of the metal grease filters.
Do not clean heavily soiled metal grease filters
■
together with dishes.
Place the metal grease filters loosely in the
■
dishwasher. The metal grease filters must not be
wedged in.
Advertisement
Table of Contents
