Page 1
LI97SA561S, LI97SA561B, LI67SA561S, LI97RA561, LI67RA561 Extractor hood EN User manual and installation instructions Register your appliance on My Siemens and discover exclusive services and offers. Siemens Home Appliances...
en Safety Table of contents 1.3 Restriction on user group This appliance may be used by children aged INFORMATION FOR USE 8 or over and by people who have reduced physical, sensory or mental abilities or inad- Safety .............. 2 equate experience and/or knowledge, provided that they are supervised or have Avoiding material damage........ 4 been instructed on how to use the appliance...
Safety en WARNING ‒ Risk of poisoning! WARNING ‒ Risk of fire! Risk of poisoning from flue gases being Fatty deposits in the grease filters may catch drawn back in. Room-air-dependent heat-pro- fire. ducing appliances (e.g. gas, oil, wood or coal- ▶ Never operate the appliance without a operated heaters, continuous flow heaters or grease filter.
en Avoiding material damage An ingress of moisture can cause an electric WARNING ‒ Risk of injury! shock. Components inside the appliance may have ▶ Before cleaning, pull out the mains plug or sharp edges. switch off the fuse in the fuse box. ▶...
Environmental protection and saving energy en 3 Environmental protection and saving energy 3.1 Disposing of packaging If cooking produces large amounts of steam, select a higher fan speed in good time. The packaging materials are environmentally compat- ¡ The odours are distributed around the room less. ible and can be recycled.
en Familiarising yourself with your appliance 5 Familiarising yourself with your appliance 5.1 Controls You can use the controls to configure all functions of your appliance and to obtain information about the operating status. Switching the appliance on or off Increasing the fan setting/ Intensive mode 1, 2 Switching the lighting on or off/ Switching on the boost function...
Cleaning and servicing en Change the saturated odour filters and observe the in- 7.7 Switching on the fan run-on structions in the accompanying instructions. During the fan run-on, the appliance continues to run If odour filters can be regenerated, follow the instruc- for a short time and then switches off automatically.
Page 8
en Cleaning and servicing 8.2 Cleaning the appliance Clean using a damp sponge cloth and hot soapy water. Clean the appliance as specified. This will ensure that Dry with a soft cloth. the different parts and surfaces of the appliance are not damaged by incorrect cleaning or unsuitable clean- ing products.
Troubleshooting en 8.6 Cleaning grease filters in the Observe the information regarding the cleaning dishwasher agents. → "Cleaning products", Page 7 The grease filters filter the grease from the cooking va- Place the grease filters loosely into the dishwasher. pour. Regularly cleaned grease filters guarantee a high level of grease removal.
You can find out which accessories are available for white your appliance in our catalogue, in the online shop or Handle strip – 90 cm, LZ49521 from our after-sales service. white siemens-home.bsh-group.com Lowering frame – 90 cm LZ49601 Accessories Order number Clean Air Standard recir- LZ12ITI14 culation kit Long Life odour filter –...
Installation instructions en Accessories Order number Accessories Order number Handle strip – 90 cm, LZ49850 Handle strip – 60 cm, LZ46850 black design black design 13 Installation instructions 13.2 Safety clearances Observe this information when installing the appliance. Comply with the safety clearances for the appliance. 13.1 Included with the appliance After unpacking all parts, check for any damage in transit and completeness of the delivery.
Page 12
en Installation instructions room-air-dependent heat-producing appli- ▶ Do not install the appliance near a heat- ance is being operated. producing appliance for solid fuel (e.g. ▶ It is only possible to safely operate the ap- wood or coal) unless a closed, non-remov- pliance if the pressure in the room in which able cover is present.
Page 13
Installation instructions en Incorrect installation is dangerous. 13.5 Instructions for the electrical ▶ Connect and operate the appliance only in connection accordance with the specifications on the In order to safely connect the appliance to the elec- rating plate. trical system, follow these instructions. ▶...
Page 14
en Installation instructions ¡ To prevent condensate from returning, fit the ex- Use the enclosed mounting part to mark the fasten- haust pipe with a 1° gradient from the appliance. ing points on the inside of the cabinet and use a bradawl to make indentations where the holes are 13.8 Installation to be.
Page 15
Installation instructions en Preparing the appliance Appliance width 90 cm: Pull the filter pull-out out Insert the holders for the wall edging strip on the completely towards the front. Also use two screws outside rear of the appliance into the cut-outs and each on the left and right to screw the appliance to fold them in to the centre of the unit.
Page 16
en Installation instructions Changing the filter pull-out's limit stop Push in the fastening bolts using a flat-blade screw- On some versions of the appliance, the limit stop for driver and rotate by 90° until the fastening bolts un- the filter pull-out can be changed. Spacers are included clip.
Page 20
EN Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT United Kingdom BSH Hausgeräte GmbH Carl-Wery-Straße 34...