Kenwood KDC-C667 Instruction Manual
Compact disc auto changer
Hide thumbs
Also See for KDC-C667:
- Instruction manual (16 pages) ,
- Instruction manual (21 pages) ,
- Service manual (28 pages)
Advertisement
Quick Links
Download this manual
See also:
Service Manual
Troubleshooting Guide
PROBLEM
POSSIBLE CAUSE
Sound skips due to vibra-
• The unit is mounted at a slant.
tion.
• Changer unit is mounted in an
unstable place.
• The angle adjustment switches
are set improperly.
The disc changer mode
The O-N selection switch of the
cannot be selected.
disc changer is not set properly.
When removing the CD changer, be sure to first eject a magazine then unplug the changer cord. Do
not forget to attach the transport screws before transporting the CD changer.
The CD changer may be damaged during transport if a magazine or CD is left inside it or the transport
screws are not attached.
Specifications
Specifications subject to change without notice.
Laser diode ..................................................................................................GaAlAs (λ=780 nm)
Digital Filter ..............................................................................................8 Time Over Sampling
D/A Converter.......................................................................................................................1 bit
Spindle speed.............................................................................................500 ~ 200 rpm (CLV)
Wow & Flutter......................................................................................Below Measurable Limit
Frequency Response (±1 dB) ...............................................................................5 Hz ~ 20 kHz
Total harmonic distortion (1 kHz) ...................................................................................0.005 %
Signal to Noise Ratio........................................................................................................100 dB
Dynamic range ...................................................................................................................94 dB
Channel separation.............................................................................................................96 dB
Operating voltage...........................................................................14.4 V (11 ~ 16 V allowable)
Current consumption ................................................................................0.8 A at Rated power
Dimensions (W × H × D)
(KDC-C717)........................................250 × 80 × 176 mm (9-13/16 × 3-1/8 × 6-13/16 in.)
(KDC-C667)........................................250 × 64 × 176 mm (9-13/16 × 2-1/2 × 6-13/16 in.)
Weight (KDC-C717) ............................................................................................2.0 kg (4.4 LBs)
Weight
(KDC-C667) ............................................................................................1.8 kg (4.0 LBs)
SOLUTION
• Mount the unit so that is level.
• Mount the unit in a stable place.
• Set the angle adjustment
switches to the correct posi-
tions.
Set the O-N selection switch to
"O" position.
COMPACT DISC AUTO CHANGER
KDC-C717
KDC-C667
INSTRUCTION MANUAL
©B64-1801-20 (MW)
Advertisement
Related Manuals for Kenwood KDC-C667
Summary of Contents for Kenwood KDC-C667
-
Page 1: Troubleshooting Guide
Current consumption ...0.8 A at Rated power Dimensions (W × H × D) (KDC-C717)...250 × 80 × 176 mm (9-13/16 × 3-1/8 × 6-13/16 in.) (KDC-C667)...250 × 64 × 176 mm (9-13/16 × 2-1/2 × 6-13/16 in.) Weight (KDC-C717) ...2.0 kg (4.4 LBs) Weight (KDC-C667) ...1.8 kg (4.0 LBs) - Page 2 Take out discs as far away as possible from the speakers. and the fogging will disappear. If it does not return to normal after several hours, contact your Kenwood deal- NOTE • If you have difficulty in installing this unit in your Heat protection vehicle, contact your Kenwood dealer.
-
Page 3: Loading Compact Discs
Loading compact discs Projection Make sure the disc magazine is the right Insert the magazine into the CD changer way up with the "disc" logo on the top.Pull until it clicks. the tray out by the projection. Tray Close the CD changer door. NOTE Use the CD changer with its door closed to Place the disc on the tray with the label fac-... - Page 4 CAUTION Do not tighten the screw B too securely at the time of installation, but tighten it securely after having fixed the bracket A. ■ Horizontal installation KDC-C667 KDC-C717 Angle adjustment switch position ■ Vertical installation ■ In case of hanging in the trunk ø4...