Table of Contents
Advertisement
en Basic settings
Basic setting
InfoLight
Tone volume
Wi-Fi
Remote Start
Factory setting
1
Factory setting (may vary according to model)
34
Display text
Selection
1
I01
I00 - I01
1
b02
b00 - b03
Cn0
Cn0 - Cn1
rc1
rc0 - rc2
rE
Start with
YES
Confirm with
Description
Switch InfoLight on or off.
While the programme is running, a
spot of light is projected onto the
floor below the appliance door. This
light will not be visible if the appli-
ance is installed at eye level with the
cabinet front fitted flush. If the appli-
ance door is not completely closed,
the spot of light will flash. The pro-
gramme has ended when the spot of
light is no longer visible on the floor.
Level "I00" switches InfoLightoff.
Adjustment of tone volume.
Level "b00" switches the signal tone
off.
Switch the wireless network connec-
tion on or off.
Level "Cn0" switches the wireless
network connection off.
The basic setting "Wi-Fi" is only avail-
able once the appliance is connec-
ted to the Home Connect app.
→ "Home Connect ", Page 35
Activate or deactivate
→ "Remote Start ", Page 36.
The following settings are possible:
¡ With the setting "rc0", the func-
tion is permanently deactivated.
¡ With the setting "rc1", the func-
tion can be selected via the
button.
→ "Activating Remote Start ",
Page 36
¡ With the setting "rc2", the func-
tion is permanently activated.
This basic setting is not available un-
til after you have connected the
device with the Home Connect app.
→ "Home Connect ", Page 35
Restore changed settings to the fact-
ory settings.
The settings for initial start-up must
be configured.
Advertisement
Table of Contents
