Table of Contents
Advertisement
Operation Manual / 4 Product description / A130-H.. - A140-H
8 Dismantling and fitting / 8.8 Removing the cartridge group
Fig. 38: Removing cartridge group 2
3. Insert screws from service support into cartridge group.
4. Secure ring nuts (VRM) onto the screws with washers.
5. Secure the lifting gear to the ring nuts and suspension eye as shown.
6. Remove the cartridge group vertically from the turbine casing.
7. Turn the cartridge group into the horizontal rotor axis.
If the cartridge group cannot be loosened, the press-off tool (90042) can be used (see
chapter
Pressing off the casing
→68).
© Copyright 2020 ABB. All rights reserved.
HZTL4030_EN
Rev.F
February 2020
Advertisement
Chapters
Table of Contents
