18. TECHNICAL DATA....................49 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
Page 4
This appliance is intended to be used in household • and similar applications such as: staff kitchen areas in shops, offices and other – working environments; by clients in hotels, motels, bed & breakfast and – other residential type environments;...
Page 5
ENGLISH The appliance must be connected to the water mains • using the new supplied hose sets, or other new hose sets supplied by the Authorised Service Centre. Old hose sets must not be reused. • If the mains power supply cable is damaged, it must •...
Clean the appliance with a moist cloth. Use only • neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects. Before any maintenance operation, deactivate the • appliance and disconnect the mains plug from the socket.
ENGLISH • Do not touch the glass door while a • Do not sit or stand on the open door. programme is in operation. The glass • Do not dry dripping wet clothes in the can get hot. appliance. • Do not dry damaged (torn, frayed) 2.5 Service items that contain padding or fillings.
Page 8
3.3 Unpacking WARNING! Use the gloves. WARNING! Remove all the packaging and the transit bolts before installing the appliance. 1. Put two polystyrene packaging elements on the floor under the appliance. WARNING! It is strongly recommended that this action is carries out by two persons.
Page 9
ENGLISH 5. Remove the power supply cable and the drain hose from the hose holders. It is possible to see water flowing from the drain hose. This is due to the testing with water of the appliance in factory. 6. Remove the three bolts, the hose holders and plastic spacers by using the spanner supplied with the appliance.
Page 10
3.4 Positioning and levelling 1. Install the appliance on a flat hard floor. WARNING! Make sure that carpets do not stop the air circulation below the appliance. Bring the appliance near the furniture recess before levelling it. For more details, refer to paragraph "Building...
Page 11
ENGLISH The inlet hose 1. Remove the inlet hose from inside the drum. 2. To connect the water inlet hose towards the proper direction and with the proper inclination, check the position of the water tap before connecting it to the back of the appliance.
Page 12
To a stand pipe with vent-hole Directly into a drain pipe at a height of not Ø 40 mm less than 60 cm (23.6”) and not more than 100 cm (39.3”). The end of the drain hose must always be ventilated , i.e.
Page 13
ENGLISH If hoses run behind the 596 mm 553 mm appliance, make sure that nothing closes the small recess indicated with the measures 50 x 50 mm. 819 mm 50 mm 50 mm 140 mm 76 mm The appliance is also equipped with an adhesive sponge pad H that you can find inside the drum.
Page 14
Factory pre setting The appliance is originally pre set for the assembly of a cupboard door opening from right to left. The best solution would be to screw the upper hinge to the upper hole of the top plate...
Page 15
ENGLISH Cupboard door preparation For countersinking the door, it is recommended to call a professional. Align the cupboard door to the furniture correctly. Measure the distance X to fix the height of the hole to countersink the upper hinge. The centre of the hole Y should be at the same height of the stroke on the hinge support.
Mounting the door Fix the hinges to the hinge supports on the appliance by means of the two supplied screws B. The hinges can be adjusted to compensate for possible uneven thickness of the door. Counter-magnet The appliance is pre set for a magnetic closure.
ENGLISH Plate with rubber beater Mains cable Drain pump filter Inlet hose connection Front feet for levelling the appliance Back feet for levelling the appliance Drain hose 5. CONTROL PANEL 5.1 Control panel description Temperatura Auto Dry Inicio/ Pausa Tiempo/ Centrifug.
Page 18
5.2 Display The Temperature area: Temperature indicator . Cold water indicator. Door locked indicator. Child safety lock indicator. The digital indicator can show: • Programme duration (e. g. , washing and/or drying phase). • Delay time (e. g. • Cycle end ( •...
ENGLISH Drum clean indicator. This is a recommendation to perform the drum cleaning. Refer to paragraph "Cleaning the drum" in "Care and cleaning" chapter. Anti-crease phase indicator. Drying phase indicator. The spin area: Spin speed indicator No Spin indicator. Spin phase is off. Rinse Hold indicator.
Page 20
• Additional spin options No Spin 6.7 Permanent Extra Rinse With this option you can permanently Set this option to deactivate all spin have an extra rinse when you set a new phases. The appliance performs the programme. only draining phase of the selected washing programme.
Page 21
ENGLISH 6.10 Time Save • : maximum. • : medium. With this option you can reduce the programme duration depending on the • : minimum. load size and the degree of soiling. 6.11 Child Lock When you set a washing programme, the display shows the default duration and With this option you can prevent children dashes.
6.16 Inicio Diferido • Iron dry: laundry to be ironed. • Cupboard dry: laundry to be put With this option you can delay the start in store. of a programme to a more convenient time. • Extra dry: laundry to be fully dried.
Page 23
ENGLISH Programme Reference Maxi- Programme description Default tem- spin speed (Type of load and soil level) perature Spin speed load Temperature range range 1200 rpm 2 kg Delicate fabrics such as acrylics, viscose and (1200- 400 mixed fabrics requiring gentler washing. Nor- Delicados rpm) mal soil.
Page 24
Programme Reference Maxi- Programme description Default tem- spin speed (Type of load and soil level) perature Spin speed load Temperature range range 1200 rpm Maintenance cycle with hot water to clean and (1200 - 400 freshen the drum and to remove residue that...
Page 25
ENGLISH Programme Reference Maxi- Programme description Default tem- spin speed (Type of load and soil level) perature Spin speed load Temperature range range 1200 rpm 2 kg Do not use fabric softener and (1200- 400 Outdoor make sure that there is no soften- rpm) er residue in the detergent dis- 30 °C...
Page 27
ENGLISH Programme ■ ■ NonStop 60min 1) This option excludes the option. 2) Prelava. and Manchas cannot be selected together. 3) If you set the No Spin option, the appliance performs draining only. 7.2 Woolmark Apparel Care - washed according to the instructions on the garment label and those Blue issued by the manufacturer of this...
Page 28
Dryness Level Type of fabric Load Cottons and Linen up to 4 kg (bathrobes, bath towels, etc) Cupboard Dry Synthetics and mixed fab- up to 3 kg For items to be stored rics (jumpers, blouses, under- wear, household and bed lin-...
9. BEFORE FIRST USE 1. Make sure that the electrical power is 4. Set and start a programme for cotton available and the water tap is open. at the highest temperature without 2. Pour 2 litres of water into the any laundry in the drum.
Page 31
ENGLISH - Maximum level for quantity of liq- uid additives. - Flap for powder or liquid deter- gent. Always follow the instructions that you find on the packaging of the detergent products, but we recommend that you do not With the flap in the position DOWN: exceed the maximum •...
Page 32
Changing the delay start after 3. If desired, set one or more options by touching the related buttons. The the countdown has started related indicators illuminate on the display and the given information To change the delay start: changes accordingly.
Page 33
ENGLISH There is also an alternative way of About 20 minutes after the cancelling: programme start, the 1. Rotate the selector knob to the programme duration could "Reset" position be adjusted again 2. Wait for 1 second. The display shows depending on the capacity of water absorption of the fabrics.
When you activate the If you have selected No Spin appliance again, the display , the appliance will shows the end of the only drain the water. previous programme. Turn 3. When the programme is completed the programme dial to set a new cycle.
Page 35
ENGLISH Proceed as follows: indicators in the display illuminate accordingly: 1. After loading laundry and detergent, Iron dry: for cotton items; press the On/Off button for some seconds to activate the appliance. Cupboard dry: for cotton and 2. Set the NonStop 60min programme synthetic items;...
• The indicator of the Inicio/Pausa • Press the On/Off button for some seconds to deactivate the appliance. button goes off. The door locked goes off. After some minutes from The appliance continues to operate the end of the...
ENGLISH We recommend, for better results, In the display the door locked that you remove the laundry when the indicator comes on. phase is almost completed or The display also shows the remaining programme time. completed. The indicator remains lit. 12.4 At the end of the drying •...
Page 38
• Follow the washing instructions on the – powder detergents for all types of laundry care labels. fabric, excluding delicate. Prefer • Do not wash white and coloured powder detergents containing items together. bleach for whites and laundry • Some coloured items can discolour sanitization with the first wash.
ENGLISH 14.6 Prepare the drying cycle • = The item can not be tumble dried. • Open the water tap. • Check if the drain hose is connected 14.9 Drying cycle duration properly. Refer to installation chapter for more information. The drying time can change depending •...
Page 40
Regularly examine the drum to check for conveniently recovered at the end of the limescale. cycle. Regular detergents already contain water softening agents, but we recommend to 15.5 Cleaning the drum run a cycle with an empty drum and a Regularly examine the drum to prevent descaling product occasionally.
Page 41
ENGLISH 4. Insert the detergent drawer into the guide rails and close it. Run the rinsing programme without any clothes in the drum. 2. Remove the top part of the additive compartment to aid cleaning and flush it out under running warm water, to remove any traces of accumulated detergent.
Page 42
1. Open the pump cover. 2. Place a suitable bowl below the drain pump access to collect the water that flows out. Always keep a rag nearby to dry up any water spillages when removing the filter. 180˚ 3. Turn the filter 180 degrees in anti-clockwise direction to open it, without removing.
Page 43
ENGLISH 7. If it is necessary, remove fluff and objects from the filter recess. Make sure that the impeller of the pump can rotate. If it does not rotate, contact the Authorised Service Centre. 8. Clean the filter under the water tap. 9.
15.8 Cleaning the inlet hose and the valve filter 45° 20° 15.9 Emergency drain remaining water from the inlet hose and the drain pump. If the appliance cannot drain the water, 1. Disconnect the mains plug from the carry out the same procedure, described mains socket.
Page 45
ENGLISH 16.1 Introduction The appliance does not start or it stops during operation. First try to find a solution to the problem (refer to the table). If the problem persists, contact the Authorised Service Centre. WARNING! Deactivate the appliance before carrying out any check. In case of major problems, the acoustic signals operate, the display shows an alarm code and the Inicio/Pausa button may flash continuously: •...
Page 46
16.2 Possible failures Problem Possible solution • Make sure that the mains plug is connected to the mains socket. • Make sure that the appliance door is closed. • Make sure that there is no damaged fuse in the fuse box.
Page 47
ENGLISH Problem Possible solution • Make sure that a washing programme that ends with water in tub, has been selected. • Make sure that the washing programme is finished. • Set the drain or the spin programme if there is water in the You cannot open the ap- drum.
After the check, activate the appliance. The programme continues from the point of interruption. If the problem occurs again, contact the Authorised Service Centre. If the display shows other alarm codes, deactivate and activate the appliance. If the problem continues, contact the Authorised Service Centre.