BaByliss 668E-B7 Manual

Read the safety instructions first.

HOW TO USE

• Ensure the hair is 80% dry and combed through to remove any tangles. Create your parting and divide the hair into sections ready for styling.
• Secure the selected brush attachment onto the appliance.
• Ensure the voltage to be used corresponds with the voltage selected on the appliance.
• Slide the switch to the 'I or 'II position to turn the appliance on and to select a heat setting suitable for your hair type.
• Take a section of hair and place the brush under the section, close to the roots.
• Move the brush along the hair section and as you reach the ends of the hair, rotate the appliance slightly to curl the ends under.
• Repeat as necessary.
• After use, slide the switch to the '0' setting to switch off and unplug the appliance.
• Allow the appliance to cool before storing away.

Voltage

The voltage can be adjusted for use at either 115V or 230V by selecting the required voltage using the screw on the handle. Always ensure the voltage to be used corresponds with the voltage selected. Never use the appliance on 230V if the appliance is set to 115V or vice versa.

Heat and Speed Settings

There are 2 heat/speed settings. Slide the switch to the first position for the low heat and slower speed 'I' and the second position to select high heat and faster speed 'II'. Please note: If you have delicate, fine, bleached or coloured hair, use the lower heat setting. For thicker hair, use the higher heat setting.

Changing the Attachments

• Place the attachment onto the handle and turn the ring at the base of the brush to secure.
• To remove a brush head, turn the ring at the base of the brush and pull the attachments away from the handle.

CLEANING & MAINTENANCE

To help keep your appliance in the best possible condition, please follow the steps below:

General

• Ensure the appliance is switched off, unplugged and cool. To clean the outside of the appliance, wipe with a damp cloth. Make sure that no water enters the appliance and it is completely dry before use.
• Do not wrap the lead around the appliance, instead coil the lead loosely by the side of the appliance.
• Do not use the appliance at a stretch from the power point.
• Always unplug after use.

Cleaning the Filter

• Unplug the appliance and let it cool completely before cleaning it.
• Using a soft brush, clean any hair and other debris from the filter.

BABYLISS SARL
99 avenue Aristide Briand
92120 Montrouge
France
www.babyliss.com

FAC/2019/03

IB-19/087