ULTRASONIC CLEANER Content 1. Caution ········································································· 2. Specification ·································································· A. UCP Series B. UCS Series 3. Operation ································································ A. Function Key B. Starting Method 4. Cleaning Method ··················································· A. Direct Cleaning B. Indirect Cleaning C. Effective Cleaning 5. Trouble Shooting ························································...
ULTRASONIC CLEANER Caution Thank you very much for purchasing our ultrasonic cleaner. Please read and fully understand the following instruction in order to prevent accidents from happening and clean the works cleanly before operating ultrasonic cleaner. And mis-operation of ultrasonic cleaner could result in serious personal injury or cleaner.
Page 4
ULTRASONIC CLEANER [Caution] Attention Danger Make sure you check the proper Do not pour solvent in the bath. voltage on sticker before plugging Otherwise, it may cause the in. Otherwise, it may result in damage damage to the to the product. cleaner.
Page 5
ULTRASONIC CLEANER [Caution] - Continue Attention Attention Do not use the unventilated cover Keep the controller part clean except for cover or having vapor holes. and dry and do not place the things on the cover. Danger Danger Do not put your hands in Do not attempt to take the cleaner the bath in operating, apart to repair it while power is...
ULTRASONIC CLEANER Operation (except for UCP-02) A. Function Key [ DISPLAY ] FND-TEMP : Display of Temperature. FND-TIME : Display of Operation Time(Displays the remaining time in minutes) Display of Operation Mode : Normal, Pulse, Sweep Display of Ultrasonic Power : Low, Middle, High ...
ULTRASONIC CLEANER B. Starting Method If you have basket, put in the sump. Put cleaning stuff into sump. iii. Put liquid into sump until going to indication line. POWER ON. LED and FND test and then wait to be ready to operate. Press SET KEY once and set temperature of liquid.
ULTRASONIC CLEANER Cleaning Method A. Direct Cleaning It is to clean the works directly by putting the works in bath. It is easy and good detergency. Pour Cleaning solution up to the indication line(When works are put) iii. Put the works in the perforated Basket or Pallet, and put it in the bath.
ULTRASONIC CLEANER Trouble Shooting Troubles Causes Solutions Cleaner is not 1. Bad connection Power Plug 1. Check the power inlet powered. 2. Power inlet Fuse is bad 2. Replace Fuse 3. Fuse unit in generator is 3. Request A/S bad. Key doesn’t 1.