Related Manuals for Bosch WAX32K50NL
Summary of Contents for Bosch WAX32K50NL
- Page 1 Translated from Dutch to English - www.onlinedoctranslator.com Washing machine WAX32K50NL [NL] User manual and installation instructions...
-
Page 2: Table Of Contents
Refer to the Digital User's Guide for more information. Index 1 Safety..........4 6 Before using for the first time ....21 1.1 General instructions ....4 6.1 Starting a wash cycle without 1.2 Destination of the device laundry..........21 rate ........ - Page 3 15 Intelligent dosing system ..35 15.1 Starting the program with the intelligent dosing system ... 35 15.2 Filling the dosing container ..36 15.3 Contents of the dosing reservoir........37 15.4 Basic dosing quantity ..37 16 Basic Settings ....38 16.1 Overview of the basic settings ........
-
Page 4: Safety
NLSafety 1 Safety Observe the following safety instructions. 1.1 General instructions sRead this manual carefully. sKeep the operating instructions and product information for future reference. for use or for subsequent owners. sDo not connect the device in case of transport damage. 1.2 Destination of the device Only use the device: sto wash machine-safe textiles and wool by hand... -
Page 5: Secure Installation
SafetyNL 1.4 Secure installation Observe the safety regulations when installing the device. WARNING ‒ Risk of electric shock! Improper installations are dangerous. ▶ Only connect and use the device in accordance with the information on the type plate. ▶ Only connect the device to a mains supply with alternating current via a properly installed earthing socket. - Page 6 NLSafety ▶ Use only manufacturer-approved adapters and power cords. ▶ If the power cord is too short and a longer power cord is not available, contact an electrical retailer to adjust the home installation. WARNING ‒ Risk of injury! The heavy weight of the device can cause injuries when lifted. ▶...
-
Page 7: Safer Use
SafetyNL There is a tripping hazard with incorrectly laid hoses and mains connection cables. ▶ Lay the hoses and connection cables in such a way that they cannot be tripped over. If the appliance is moved by protruding parts, such as the loading door, the parts can break off. - Page 8 NLSafety WARNING ‒ Risk of health hazard! Children can lock themselves in the appliance and endanger their lives. ▶ Do not install the appliance behind a door that blocks or prevents the opening of the appliance door. ▶ In the case of discarded appliances, remove the plug of the mains cable from the socket, then cut the mains cable and damage the lock of the appliance door so that the appliance door no longer closes.
-
Page 9: Safe Cleaning And Maintenance
SafetyNL Reaching into the rotating drum can cause injury to hands. ▶ Wait for the drum to come to a complete stop before reaching inside the drum with your hand. CAUTION ‒ Risk of burns! The soap gets hot when washing at high temperatures. ▶... - Page 10 NLSafety WARNING ‒ Risk of injury! The use of non-original spare parts and non-original accessories is dangerous. ▶ Only use original spare parts and original accessories from the manufacturer. WARNING ‒ Risk of poisoning! Toxic fumes can be generated when cleaning agents containing solvents are used.
-
Page 11: Avoiding Material Damage
Avoid material damageNL Make sure that the internal ▶ 2 Material damage diameter of the water tap is at least avoid 17 mm. Make sure that the thread length ▶ on the connection to the water Follow this instruction to avoid tap is at least 10 mm. -
Page 12: Environmental Protection And Saving
NLEnvironmental protection and saving Clean the device only with water ▶ Detergent according to the degree of and a soft, damp cloth. soiling of the laundry . ▶ Remove all detergent residues, spray aFor a light to normal degree mist residues or residues immediately of contamination, a small amount upon contact with the appliance. -
Page 13: Energy Saving Mode
Set up and connect Remove the accessories from the The device has an aqua sensor. drum. Close the appliance door. aThe aquasensor monitors during the flush adjusts the turbidity of the 4.2 Package contents flush water and adjusts the duration and number of flushing cycles After unpacking, check all parts for accordingly. -
Page 14: Removing Transport Locks
NLSet up and connect installation site WARNING To demand Risk of injury! kitchen The device al- When used on a plinth, the device can borrow under a tip over. continuous work The device feet for commissioning ▶ place sheet, on a plinth must be absolutely that fixed with the with the fixings adjacent... -
Page 15: Removing Transport Reinforcements
Set up and connectNL Loosen and remove all bolts of the 4 Install the 4 cover caps. transport locks with a SW13 open- end wrench Push the 4 cover caps down. Remove the mains connection cable from the holder. 4.5 Removing transport reinforcements Remove the 4 sleeves. -
Page 16: Connecting The Device
NLSet up and connect Remove the transport 4.6 Connecting device reinforcements. Connect water supply hose WARNING Risk of electric shock! The device contains live parts. Touching live parts is dangerous. Do not immerse the electric ▶ Aquastop valve in water. Connect the water inlet hose to the tap (26.4 mm = 3/4"). -
Page 17: Adjusting The Device
Set up and connectNL To adjust the appliance, turn the The connection position appliance feet. Check the horizontal tie with a adjustment of the appliance with a hose clamp spirit level. (24-40 mm) bore gene. washbasin the water drainage feeding hose with a bend fixate and gene. - Page 18 NLSet up and connect Insert the mains plug of the appliance's mains cable into a socket in the vicinity of the appliance. The connection data of the device can be found in the technical data → Page 60 . Check the mains plug for tightness.
-
Page 19: Getting To Know Your Device
Getting to know your deviceNL 5 Getting to know your device 5.1 Device Here you will find an overview of the components of your device. Depending on the device type, details in the picture may differ, e.g. the color the V om m. -
Page 20: Control Panel
NLGetting to know your device maintenance products and the Manual Dosing Compartment information in the program descriptions. / : dispenser for fabric → "Programs", Page 27 softener or liquid detergent : dispenser for liquid detergent 1 2 3 5.3 Control panel You can set all functions of your device and obtain information about the operating status via the control panel. -
Page 21: Before Using For The First Time
usage aThe display shows the remaining Before first use program duration. aAfter the program end, it shows B prepare the device for use. display: -0-. Start the first wash cycle or press to switch off the appliance. 6.1 Start the wash cycle →... -
Page 22: Display
NLDisplay 7 Display The display shows the current setting values, options or information texts. name Display More information 0:40 Approximate expected program duration Program duration / remaining time of or time remaining in the program. the program → "Buttons", Page 25 Ready in time 10.0 kg Recommended load Maximum load amount for the... - Page 23 DisplayNL name Display More information - 0- Program end Program status Child lock slights up: the child lock is activated. s flashes: the child lock is activated and the device was operated. → "Deactivate child lock", page 35 Energy consumption for the set Energy consumption programme.
- Page 24 NLDisplay name Display More information E:35 / -10 Error code, error indication, signal. Error Example...
- Page 25 TestsNL 8 Keys The selection of the program settings depends on the program set. Knob Choice More information Start/Refill sstart Start, cancel or pause program. sCancel spause SpeedPerfect sactivate Activate or deactivate reduced program duration. sdeactivate Remark:The energy consumption is higher.
- Page 26 NLTests Knob Choice More information Spin speed - 1600 Adjust the spin speed or (rinse hold). The selection does not drain the water at the end of the wash cycle and deactivates the spin cycle. The laundry remains in the rinse water. sSwitch Turn the device on or off.
-
Page 27: Programs
ProgramsNL 9 Programs Remark:The care labels on the laundry give you additional information on program selection. Max. Program Description bela- thing (kg) 10.0 Cotton Wash hard-wearing cotton, linen and blended fabrics. Also suitable as a shortened program for normally soiled laundry if you activate SpeedPerfect. Program setting: smax. - Page 28 NLPrograms Max. Program Description bela- thing (kg) Fast mix Wash textiles made of cotton, linen, synthetic materials and blended fabrics. Suitable for lightly soiled laundry. Program setting: smax. 60 °C smax. 1600 rpm Delicate silk Wash delicate, washable textiles made of silk, viscose and synthetics.
- Page 29 ProgramsNL Max. Program Description bela- thing (kg) smax. 1600 rpm shirts Wash non-iron shirts and blouses made of cotton, linen, synthetic and blended fabrics. Tip:To avoid creasing of the laundry, activate Anti Crease. The laundry is only spun briefly and can be taken out dripping wet.
- Page 30 NLPrograms Max. Program Description bela- thing (kg) swith frequent washing with a washing temperature of 40°C and below safter a long absence Use a powder detergent or a detergent containing bleach. Halve the amount of detergent to avoid foaming. Do not use fabric softener. Do not use wool, delicates or liquid detergents.
-
Page 31: Accessories
QR code in the table of contents or on – Tie together long drawstrings and www.bosch-home.com. cords with fixed ends in hoods or 11.1 Preparing the laundry trousers – Remove curtain rollers and lead... -
Page 32: Detergent And Care Ginger
QR code care product in the table of contents or on www.bosch-home.com. Comments 13.1 Switch on device sMore information can be found in the digital manual by scanning the QR code in... -
Page 33: Laundry
ServiceNL Comments Remark:Keep the directions for detergent and care agent → Page 32 sThe program settings will be not stored permanently for the program. Pull out the detergent drawer. sWhen you use the intelligent dosing Fill with detergent. activates or deactivates the →... -
Page 34: Adding Laundry
NLService 13.8 Adding laundry 13.10 Resume program at rinse hold After the program has started, you can remove or add laundry Requirements depending on the program status. sThe rinse hold is activated. → "Buttons", Page 26 sThe last rinse of the Required:A program has started. -
Page 35: Child Lock
Child lockNL 14 Child Lock 15 Intelligent dosing system teem Secure your device against unwanted operation via the controls. Depending on the program and the settings, the optimum amounts of liquid detergent and fabric softener 14.1 Activating child lock are dosed automatically. Both keysChild lock 3 sec.press for ▶... -
Page 36: Filling The Dosing Container
NLIntelligent dosing system 15.2 Filling the dosing container Requirements sThe laundry is prepared. → "Preparing the laundry", If you want to use the intelligent dosing system or if the device shows Page 31 an indication during use, fill the sThe laundry is sorted. sThe dosing containers. -
Page 37: Contents Of The Dosing
Intelligent dosing system Pour liquid detergent and fabric Adjusting the contents of the dosing softener into the respective dosing container containers. Press . for about 3 si-DOS. → "Detergent drawer", Page 19 Press i-DOSto to set- len. aThe display shows displayed ven. -
Page 38: Basic Settings
NLBasic settings 16 Basic Settings You can configure the basic settings of your device according to your needs. 16.1 Overview of the basic settings Basic setting Description program position Where the Signal 0 (off) The volume of 1 (soft) the signal after 2 (average) the program end Set up. -
Page 39: Changing Basic Settings
QR code residues. in the table of contents or on Turn off the device. www.bosch-home.com. → "Switch off the device", page 34 Pull out the detergent drawer. - Page 40 NLCleaning and maintenance Press the insert down and remove Empty the detergent drawer. the detergent drawer. Clean the pump unit with a Remove the pump unit. damp cloth. Unlock and remove the detergent Clean the detergent drawer and lid drawer lid. with a soft, damp cloth or hand shower.
-
Page 41: Cleaning The Drain Pump
Cleaning and maintenanceNL Turn off the device. Disconnect the plug of the device from the mains. Open and remove the service door. Place a sufficiently large container under the opening. Clean the housing of the detergent drawer in the appliance. Remove the drain hose from the holder. - Page 42 Cleaning and maintenance Cleaning the drain pump CAUTION - Risk of burns!The soap gets hot when washing at high Required:The drain pump is empty. → Page 41 temperatures. As there may still be residual ▶ Do not touch the hot soapy water. water in the pump, carefully Pull off the sealing cap to allow the unscrew the lid.
-
Page 43: Cleaning The Inlet Opening In The Rubber Sleeve
Cleaning and maintenanceNL Make sure that both wing wheels Install and close the service door. can be turned. 17.4 Cleaning the inlet opening Install the pump cover. in the rubber sleeve Check that the pump cover Regularly check the inlet opening in components are correctly the rubber sleeve for blockages and assembled. -
Page 44: Troubleshooting
NLTroubleshooting 18 Troubleshooting You can remedy minor faults on the device yourself. Before contacting customer service, please refer to the troubleshooting information. This way you avoid unnecessary costs. WARNING Risk of electric shock! Improper repairs are dangerous. Only trained specialist personnel may carry out repairs on the device. ▶... - Page 45 TroubleshootingNL Cause and Troubleshooting Malfunction "E:30 / -80" When dosing manually, reduce the amount of ▶ detergent for the next wash with an equal load. Unauthorized extension mounted on the water drain hose. Remove any unauthorized extensions from the ▶ water drain hose.
- Page 46 NLTroubleshooting Cause and Troubleshooting Malfunction "E:60 / -2B" The unbalance detection system has interrupted the spin cycle due to uneven distribution of the laundry. Redistribute the laundry in the drum. ▶ Remark:If possible, place large and small items of laundry together in the drum. Different sized laundry is more evenly distributed during the spin cycle.
- Page 47 TroubleshootingNL Cause and Troubleshooting Malfunction Place the pump unit in the detergent drawer. → "Cleaning the detergent drawer", Page Slide in the detergent drawer until the symbol goes out. Detergent dosage is too high. Immediate measure: mix a tablespoon of fabric ▶...
- Page 48 NLTroubleshooting Cause and Troubleshooting Malfunction "E:30/-20" Additional water filled. ▶ Do not fill the device with additional water during operation. Device not working. Mains plug of the power cable is not plugged in. Connect the appliance to the mains. ▶ The fuse in the fuse box has tripped.
- Page 49 TroubleshootingNL Cause and Troubleshooting Malfunction Remark:Until the fault has been rectified, you can Program does not start. deactivate the intelligent dosing system and dose manually. → "Buttons", Page 25 Detergent drawer is not fully retracted. ▶ Slide in the detergent drawer until the symbol goes out. Door cannot be is activated.
- Page 50 NLTroubleshooting Cause and Troubleshooting Malfunction Washing water is not Immediate measure: mix a tablespoon of fabric ▶ pumped out. softener with 0.5 l of water and pour this mixture into the manual dosing compartment (not for outdoor, sportswear and down textiles). When the intelligent dosing is activated, reduce the ▶...
- Page 51 TroubleshootingNL Cause and Troubleshooting Malfunction No error - no action required. ▶ The program duration changes during the wash Remark:When loading, place large and small items of cycle. laundry together in the drum. Different sized laundry is more evenly distributed during the spin cycle. Foam control system provides an extra rinse when foaming is too high.
- Page 52 NLTroubleshooting Cause and Troubleshooting Malfunction i-DOS i-DOS Program progress does not allow intelligent dosing. No cannot be pressed solution possible. High spin speed Low spin speed is set. rental is not Set a higher spin speed for the next wash. ▶...
- Page 53 TroubleshootingNL Cause and Troubleshooting Malfunction Short buzzing sound Intelligent dosing system performs a function test. after switching on No error - normal operating noise. ▶ of the device. Loud noise during The appliance is not leveled properly. → "Adjusting the device", Page 17 spinning.
- Page 54 NLTroubleshooting Cause and Troubleshooting Malfunction Spin result is Remark:If possible, place large and small items of not to satisfaction- laundry together in the drum. Different sized laundry is more evenly distributed during the spin cycle. ness. The laundry is too wet / too damp. Start the programCentrifuge.
- Page 55 TroubleshootingNL Cause and Troubleshooting Malfunction Detergent residue on Empty the dosing containers. → "Cleaning the detergent drawer", Page the dry laundry. Clean the dosing containers. Refill the dosing containers. → "Filling the dosing container", page 36 Basic dosing amount not set correctly. When the intelligent dosing is activated, reduce the ▶...
- Page 56 NLTroubleshooting Cause and Troubleshooting Malfunction Water drain hose is not connected correctly. Water is leaking from Connect the water drain hose correctly. ▶ the water drain hose. → "Drainage connection types", page 16 Odor has formed in Humidity and detergent residue can encourage the appliance bacterial growth.
-
Page 57: Emergency Release
→ "Start the wash cycle without instructions by scanning the QR code laundry", page 21 . in the table of contents or on www.bosch-home.com. Close the tap. Water supply hose empty. Switch off the device ate out. -
Page 58: Disposal Of Your Old
NLcustomer service 19.4 Disposal of your old chemical equipment (waste electrical and electronic device equipment - WEEE). Environmentally friendly disposal The directive sets the allows valuable raw materials to be framework for the take- reused. back valid in the EU and disposal of old appliances. -
Page 59: Aqua-Stop Guarantee
customer serviceNL son the inside of the bottom picture if you go on holiday for a few weeks, the tap should be turned holding valve. son the back of the device off. honeycomb. In order to quickly find your device data and the service telephone numbers, you can write down the data. -
Page 60: Consumption Values
NLConsumption values 21 Consumption values The following information is provided in accordance with the EU Ecodesign Regulation. The specified values for other programs asEco 40-60are only guide values and have been determined in accordance with the applicable standard EN60456. The automatic dosing function has been disabled for this purpose. Notes on the comparative test: deactivate the automatic dosing function, unless this function is the subject of the test. - Page 61 Technical dataNL up the model. The model Device depth 106.3 cm identification consists of the slash with open character of the E number (E-No.) on door the type plate. Alternatively, you will Weight 73.8kg also find the model identifier in the Maximum load 10.0 kg first line of the EU energy label.
- Page 64 Contact data of all countries are listed in the attached service directory. BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 Munich, GERMANY www.bosch-home.com A Bosch Company * 9001756312* 9001756312(020524)