Advertisement
Quick Links
WF-C5390/WF-C5890
Start Here
IMPORTANT: Before using this product, make sure you read
these instructions and the safety instructions in the online User's
Guide.
This printer is designed for use with Epson
Note:
third-party ink. For important ink information, visit
http://epson.com/epsonink (U.S.) or http://epson.ca/epsonink
(Canada) or see your printer box.
Important Safety Instructions:
should always follow basic safety precautions to reduce the risk of fire,
electric shock, and personal injury, including the following:
• Do not use the Epson product near water.
• Always keep this guide handy.
• Avoid using a telephone during an electrical storm. There may be a
remote risk of electric shock from lightning.
• Do not use a telephone to report a gas leak in the vicinity of the leak.
To reduce the risk of fire, use only a No. 26 AWG or larger
Caution:
telecommunication line cord.
The illustrations show the WF-C5890, but the steps are the same
for the WF-C5390, unless otherwise specified.
1
Unpack
WF-C5390
French control
panel sticker
The product is heavy and should be lifted and moved by two
Warning:
people.
If you purchased an optional paper cassette, see the online
Note:
User's Guide for installation instructions.
1
Remove all protective materials from the product.
Keep the two protective pieces shown after removing
Note:
them from inside the product. You will need them if you transport
your product. See the online User's Guide for transportation
instructions.
ink packs only, not
®
When using telephone equipment, you
WF-C5890
French control
panel sticker
2
Lift up the printer cover (WF-C5390) or scanner unit
(WF-C5890) and remove all protective materials from inside
the product, then close the printer cover or scanner unit.
WF-C5390
3
Insert the output tray, then set it down gently.
2
Turn on and configure
1
Connect the power cord to the back of the product and to
an electrical outlet.
WF-C5390
Do not connect to your computer yet.
Caution:
2
Raise the control panel and turn on the product.
If an error code appears, turn off the product and check that
Note:
no protective material has been left inside the product.
3
WF-C5390: Select your language, date, and time using the
arrow buttons and OK button.
WF-C5890: Select your language, country, date, and time
on the LCD screen.
You can change these settings later using the product's
Note:
control panel. For more information, see the online User's Guide.
WF-C5890
WF-C5890
Advertisement
Related Manuals for Epson WF-C5390
Summary of Contents for Epson WF-C5390
- Page 1 Lift up the printer cover (WF-C5390) or scanner unit WF-C5390/WF-C5890 (WF-C5890) and remove all protective materials from inside Start Here the product, then close the printer cover or scanner unit. WF-C5390 WF-C5890 IMPORTANT: Before using this product, make sure you read these instructions and the safety instructions in the online User’s...
- Page 2 Close the ink pack tray cover and lock it. Press an ink pack tray to release it, then pull the tray out. WF-C5390: Select Installed using the arrow buttons and press the OK button to start charging the ink. WF-C5890: Select OK on the LCD screen to start charging the ink.
- Page 3 (U.S.) or http://epson.ca/voice http://epson.ca/support/chromebookprint (Canada) for (Canada) for more information. instructions. * May require the Epson Print Enabler or Mopria Print Service app from Google The printer is designed to work only with Firmware Update Notice: Play genuine Epson branded ink packs. Other brands of ink packs and ink ** Scanning is only available on the WF-C5890.
- Page 4 EPSON, DURABrite, and Epson Smart Panel are registered trademarks, EPSON Exceed Your return your products for proper disposal. Vision is a registered logomark, and Epson Connect is a trademark of Seiko Epson Corporation. Designed for Excellence is a trademark of Epson America, Inc.